Journal of the Korean Institute of Electrical and Electronic Material Engineers (한국전기전자재료학회논문지)

The Korean Institute of Electrical and Electronic Material Engineers (한국전기전자재료학회)
권호 표지
DOI QR코드

DOI QR Code

Effects of In-situ doping Concentration on the Characteristics of Porous 3C-SiC Thin Films

In-situ 도핑량이 다공성 3C-SiC 박막의 특성에 미치는 영향

  • 김강산 (울산대학교 전기전자정보시스템공학부) ;
  • 정귀상 (울산대학교 전기전자정보시스템공학부)
  • Received : 2010.03.05
  • Accepted : 2010.04.21
  • Published : 2010.06.01
Download PDF
⟨ Previous Next ⟩

Abstract

This paper describes the elecrtical and optical characteristics of $N_2$ doped porous 3C-SiC films. Polycrystalline 3C-SiC thin films are anodized by $HF+C_2H_5OH$ solution with UV-LED exposure. The growth of in-situ doped 3C-SiC thin films on p-type Si (100) wafers is carried out by using APCVD (atmospheric pressure chemical vapor deposition) with a single-precursor of HMDS (hexamethyildisilane: $Si_2(CH_3)_6)$. 0 ~ 40 sccm $N_2$ was used for doping. After the growth of doped 3C-SiC, porous 3C-SiC is formed by anodization with $7.1\;mA/cm^2$ current density for anodization time of 60 sec. The average pore diameter is about 30 nm, and etched area is increased with $N_2$ doping rate. These results are attributed to the decrease of crystallinity by $N_2$ doping. Mobility is dramatically decreased in porous 3C-SiC. The band gaps of polycrystalline 3C-SiC films and doped porous 3C-SiC are 2.5 eV and 2.7 eV, respectively.

Keywords

References

  1. J. F. Yang, G. J. Zhang, N. Kondo, J. H. She, Z. H. Jin, T. Ohji, and S. Kanzaki, J. Am. Ceram. Soc. 86, 910 (2003). https://doi.org/10.1111/j.1151-2916.2003.tb03396.x
  2. J. Y. Fana, X. L. Wua, and P. K. Chu, Prog. Mat. Sci. 51, 983 (2006). https://doi.org/10.1016/j.pmatsci.2006.02.001
  3. A. J. Rosenbloom, Y. Shishkin, D. M. Sipe, Y. Ke, R. P. Devaty, and W. J. Choyke, Mat. Sci. Forum 457, 1463 (2004). https://doi.org/10.4028/www.scientific.net/MSF.457-460.1463
  4. V. Lysenko, D. Barbier, and B. Champagon, Appl. Phys. Lett. 79, 2366 (2001). https://doi.org/10.1063/1.1409278
  5. A. Wolf and R. Brendel, Thin Solid Films 513, 385(2006). https://doi.org/10.1016/j.tsf.2006.01.073
  6. Z. Jingchun, C. Carraro, R. T. Howe, and R. Maboudiana, Surf. Coat. Technol. 201, 8893 (2007). https://doi.org/10.1016/j.surfcoat.2007.05.007
  7. G. S. Chung, K. S. Kim, and J. H. Jeoung, J. Kor. Sens. Soc. 16, 85 (2007).
  8. K. S. Kim and G. S. Chung, J. Kor. Sens. Soc. 18,307 (2009).
  9. C. G. Jin, X. M. Wu, and L. J. Zhunge, Appl. Phys. Lett. 255, 4711 (2009).
  10. A. El. Bahar, S. Stolyarova, and Y. Nemirovsky, IEEE. Electron. Dev. Lett. 21, 436 (2000). https://doi.org/10.1109/55.863102