• Proceedings of the Korean Vacuum Society Conference
• /
• 2011.02a
• /
• pp.236-236
• /
• 2011

본 연구 축전 결합형 고주파 플라즈마(CCP) 식각장비에 펄스 직류(Pulse DC) 전원을 인가하여 오실로스코프(oscilloscope)를 분석하여 전기적 특성을 평가하는 것이다. 펄스 직류전원 플라즈마 시스템에서는 다양한 변수를 이해하여야 한다. 본 실험에서 사용한 공정 변수는 Pulsed DC Voltage 300~500 V, Pulsed DC reverse time $0.5{\sim}2.0{\mu}s$, Pulsed DC Frequency 100~250 kHz 이었다. 실험 결과를 정리하면 1) Pulsed DC Voltage 가 증가할수록 Input voltage의 최대값은 336~520 V, 최소값은 -544~-920 V로 변하여 피크 투 피크 (peak to peak)값은 880~1460 V로 증가였다. Input current 또한 최대값은 1.88~2.88 A, 최소값은 -0.84~-1.28 A로 변하여 피크 투피크 값은 2.88~4.24 A로 증가하였다. 이는 척에 인가되는 전류와 파워의 증가를 의미한다. 2) Pulsed DC reverse time이 증가하면 Input voltage와 Input current값이 증가했다 (Input voltage의 피크 투 피크 값은 1200~1440 V, Input current의 피크 투 피크 값은 3.56~4.56 A). 3) Pulsed DC frequency가 증가하면 주기가 짧아져 Input voltage와 Input current값이 증가 한다 (Input voltage의 피크 투 피크 값은 900~1320 V, Input current의 피크 투 피크 값은 2.36~3.64 A). 결론적으로 펄스 직류 플라즈마의 다양한 전기적 변수들은 반응기 내부에 인가되는 Input voltage와 Input current의 값에 큰 영향을 준다는 것을 알 수 있었다.

• Proceedings of the Korean Society of Postharvest Science and Technology of Agricultural Products Conference
• /
• 2003.04a
• /
• pp.115.2-116
• /
• 2003

중온처리가 유자의 품질에 미치는 영향을 조사키 위해 유자를 4$0^{\circ}C$에 1~3일간 처리한 후 이를 5$^{\circ}C$에 저장하면서 유자의 품질인자로서 중요한 과피의 표면색상 변화를 무처리구와 비교하였다. 열 처리한 유자를 5$^{\circ}C$의 저온 저장고에 1일 방치하여 품온을 낮춘 후 유자의 과피 색을 분석하였던 바 “L”값과 “b” 값은 무처리구와 뚜렷한 차이를 보이지 않았으나 “a”값은 무처리구에 비해 낮은 값을 보였는데 이러한 차이는 열 처리시간이 길수록 현저하였다. 또한 열처리 정도에 따라 hue angle값과 chroma값은 차이를 보이지 않았으나 $\Delta$E값과 hue값은 처리구간에 뚜렷한 차이를 보였다. 열처리한 유자의 저장 중 과피의 색상 변화를 조사하였던 바 “L”값과 “b” 값은 감소하였으나 “a”값은 증가하였다. 이 중 열 처리구의 “a”값 증가율과 “b” 값 감소율은 무처리구에 비해 낮았는데 이와 같은 차이는 열처리 정도에 따라 보다 뚜렷하였다. 또한 저장기간이 경과함에 따라 $\Delta$E값은 증가하였고 chroma값, hue값 및 hue angle값은 감소하였는데 이들 값의 변화정도 역시 열 처리정도에 따라 차이를 보였다. 한편 이와 같은 열 처리구와 무처리구의 과피 색상 차이는 과피의 미세구조 관찰 결과 열처리가 과피 표면 왁스의 분포에 영향을 주었고, 과피 색소를 과피 표면 부위에 고정시켰으며, 저장중 과피색소의 내부침착을 억제하였기 때문이었던 것으로 판단되었다.

• Journal of KIISE:Computer Systems and Theory
• /
• v.31 no.1_2
• /
• pp.67-77
• /
• 2004

Value prediction is a technique to obtain performance gains by supplying earlier source values of its data dependent instructions using predicted value of a instruction. To fully exploit the potential of value speculation, however, the efficient recovery mechanism is necessary in case of value misprediction. In this paper, we propose a sequential and selective recovery mechanism for value misprediction. It searches data dependency chain of the mispredicted instruction sequentially without pipeline stalls and adverse impact on clock cycle time. In our scheme, only the dependent instructions on the predicted instruction is selectively squashed and reissued in case of value misprediction.

• Phonetics and Speech Sciences
• /
• v.15 no.3
• /
• pp.17-25
• /
• 2023

This study examines the fundamental frequency(f0) distribution of 2,740 Korean speakers in a dialogue speech corpus. Praat and R were used for the collection and analysis of acoustical f0 data after removing extreme values considering the interquartile f0 range of the intonational phrases produced by each individual speaker. Results showed that the average f0 value of all speakers was 185 Hz and the median value was 187 Hz. The f0 data showed a positively skewed distribution of 0.11, and the kurtosis was -0.09, which is close to the normal distribution. The pitch values of daily conversations varied in the range of 238 Hz. Further examination of the male and female groups showed distinct median f0 values: 114 Hz for males and 199 Hz for females. A t-test between the two groups yielded a significant difference. The skewness representing the distribution shape was 1.24 for the male group and 0.58 for the female group. The kurtosis was 5.21 and 3.88 for the male and female groups, and the male group values appeared leptokurtic. A regression analysis between the median f0 and age yielded a slope of 0.15 for the male group and -0.586 for the female group, which indicated a divergent relationship. In conclusion, a normative f0 distribution of different Korean age and sex groups can be examined in the conversational speech corpus recorded by a massive number of participants. However, more rigorous data might be required to define a relation between age and f0 values.

• Journal of the Korea Society of Computer and Information
• /
• v.12 no.6
• /
• pp.167-175
• /
• 2007

Fuzzy logic is used to represent qualitative knowledge and provides interpretability to a controlling system model in bioinformatics. This paper focuses on a bioinformatics data classification which is an important bioinformatics application. This paper reviews the two traditional controlling system models The sequence-based threshold controller have problems of optimal range decision for threshold readjustment and long processing time for optimal threshold induction. And the binary-based threshold controller does not guarantee for early system stability in the GPCR data classification for optimal threshold induction. To solve these problems, we proposes a fuzzy-based threshold controller for ART1 clustering in GPCR classification. We implement the proposed method and measure processing time by changing an induction recognition success rate and a classification threshold value. And, we compares the proposed method with the sequence-based threshold controller and the binary-based threshold controller The fuzzy-based threshold controller continuously readjusts threshold values with membership function of the previous recognition success rate. The fuzzy-based threshold controller keeps system stability and improves classification system efficiency in GPCR classification.

• Journal of the Korean Institute of Intelligent Systems
• /
• v.12 no.4
• /
• pp.341-346
• /
• 2002

Type-1 fuzzy set is used to show the uncertainty in a given value. But there are many situations where it needs to be extended to type-2 fuzzy set because it can be also difficult to determine the crisp membership function itself. Type-2 fuzzy systems have the advantage that they are more expressive and powerful than type-1 fuzzy systems, but they require many operations defined for type-1 fuzzy sets need to be extended in the domain of type-2 fuzzy sets. In this paper, comparison and ranking methods for type-2 fuzzy sets are proposed. It is based on the satisfaction function that produces the comparison results considering the actual values of the given type-2 fuzzy sets with their possibilities. Some properties of the proposed method are also analyzed.

• Proceedings of the Acoustical Society of Korea Conference
• /
• 1991.06a
• /
• pp.113-116
• /
• 1991

본 논문에서는 고속 도로 주변에서 교통 소음 대책으로 사용되는 방음벽 효과에 대해 교통 소음 모델에 의한 예측값과 실측값을 비교하였다. 도로 교통 소음로서는 일본 음향 학회 모델, 국립 환경원 모델, 조한인 모델을 대상으로 하였다. 세가지 모델의 예측값과 실측값의 비교 결과, 갓길(노견)에서는 일본 음향 학회 모델과 국립 환경원 모델에 의한 예측값이 실측값과 $\pm$3.5dB(A) 차이로 비슷한 결과를 보였으며, 소음 측정 지점이 음원과 먼 경우는 속도가 빠를수록 일본 음향 학회 모델은 예측값과 실측값의 차이가 커졌다. 조한인 모델은 시가지 도로에서는 잘 맞지만 고속 도로에 적용하기에는 적합하지 않았다.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.11 no.5
• /
• pp.997-1003
• /
• 2007

In this paper, we propose a global approach for automatic inspection of defects in the polarizer film image. The proposed method does not rely on local feature of the defect. It is based on a global image reconstruction scheme using the singular value decomposition(SVD). SVD is used to decompose the image and then obtain a diagonal matrix of the singular values. Among the singular values, the first singular value is used to reconstruct a image. In reconstructed image, the normal pixels in background region have a different characteristics from the pixels in defect region. It is obtained the ratio of pixels in the reconstructed image to ones in the original image and then the defects are detected based on the the statistical process of the ratio. The experiment results show that the proposed method is efficient for defect inspection of polarizer lam image.

• Journal of the Korean Society of Surveying, Geodesy, Photogrammetry and Cartography
• /
• v.31 no.1
• /
• pp.23-28
• /
• 2013

The process of a feature matching for two different spatial data sets is similar to the process of classification as a binary class such as matching or non-matching. In this paper, we calculated a threshold by applying an equal error rate (EER) which is widely used in biometrics that classification is a main topic into spatial data sets. In a process of discriminating what's a matching or what's not, a precision and a recall is changed and a trade-off appears between these indexes because the number of matching pairs is changed when a threshold is changed progressively. This trade-off point is EER, that is, threshold. To the result of applying this method into training data, a threshold is estimated at 0.802 of a value of shape similarity. By applying the estimated threshold into test data, F-measure that is a evaluation index of matching method is highly value, 0.940. Therefore we confirmed that an accurate threshold is calculated by EER without person intervention and this is appropriate to matching different spatial data sets.

• Journal of the Institute of Electronics Engineers of Korea SP
• /
• v.37 no.5
• /
• pp.31-41
• /
• 2000

This paper proposes a block-based motion detection algorithm for digital video surveillance system which adaptively decides the threshold according to the kinds of images We first compute the features of a block after dividing each Image into small sub-block regions, and analyze performance of the motion detection algorithm based on statistic features by using the proposed threshold-decision method. Motion vectors are used to analyze motion degree and adaptively determine the threshold The simulation results show the performances of motion detection algorithms according to sub-block size, statistic features, noise, and threshold.