• Title/Summary/Keyword: $Z_2$

Search Result 7,099, Processing Time 0.034 seconds

Effect of Flywheel Weight on Engine Performance for the Small Diesel Engine (Flywheel의 중량(重量)이 소형(小型) 디젤기관(機關)의 성능(性能)에 미치는 영향(影響))

  • Jung, Hae Kook;Kim, Sung Rai;Myung, Byung Soo
    • Korean Journal of Agricultural Science
    • /
    • v.15 no.2
    • /
    • pp.143-152
    • /
    • 1988
  • This study was conducted to obtain basic data which affected engine performance of the power tiller being widely used in the rural area. Among the various factors affected engine performance, only flywheel weight was considered as the major factor in this study. Fuel consumption ratio, motoring loss, torque, vibration and mechanical efficiency of the engine tested were measured and analyzed on the four levels of flywheel weight (32.2, 29.7, 26.4, 24.2 kg). The results obtained were as follows: 1. The maximum output of 6 and 7.5 kW engine was 7.43 kW and 7.85 kW respectively. When flywheel weight was reduced from 32.2 kg to 24.2 kg, output power of the engine was increased 0.27 kW in 6 kW engine and increased 0.39 kW in 7.5 kW engine. 2. The fuel consumption ratio was decreased from 300.8 to 296.8 g/kW-hr in 6 kW engine and decreased from 313.6 to 312.8 g/kW-hr in 7.5 kW engine when the flywheel weight was reduced from 32.2 kg to 24.2 kg. 3. The mechanical efficiencies of the engine was increased from 76.1 to 76.8% in 6 kW engine and increased from 76.7 to 77.0% in 7.5 kW engine when the flywheel weight was reduced from 32.2 kg to 24.2 kg. 4. When the flywheel weight was reduced from 32.2 kg to 24.2 kg, a tendency of a little decrease of vibration at X- and Z-axis in 6 kW engine and of a little increase of vibration at Y-axis in 6 kW engine and all directions in 7.5 kW engine was observed. 5. Motoring losses was decreased from 2.33 to l.76 kW in 6 kW engine and decreased from 2.46 to 1.84 kW in 7.5 kW engine when the flywheel weight was reduced from 32.2 kg to 24.2 kg. From the above results and the flywheel weight calculated theoretically, it was recommendable that the flywheel weight should be reduced about 7 kg in 6 kW engine and about 10 kg in 7.5 kW engine, respectively.

  • PDF

Survey of Caffeine levels in the Favorite Diets of Children (어린이 기호식품 중 카페인 함량에 대한 조사)

  • Lee, E-Na;Kim, Hee-Jin;Im, Ji-Young;Kim, Jeoung-A;Park, Hye-Young;Ryu, Ju-Young;Ko, Kwang-Rack;Kim, Hyung-Sik
    • Journal of Food Hygiene and Safety
    • /
    • v.22 no.3
    • /
    • pp.173-178
    • /
    • 2007
  • Children may respond differently to the caffeine from adults because they have different physiologic makeup and are functionally immature in terms of hepatic and renal function; this leads to the slower clearance of caffeine in early life. Therefore, children are often assumed to be more susceptible to caffeine effects. Alarge number of food supplements may interfere with these processes, and therefore caffeine exposure may have more serious consequences for children than for adults, irrespective of sensitivity. However, there has never been a national dietary survey on caffeine intakes in children. The purpose of our study was to identify caffeine intakes and beverage sources of caffeine in a representative sample of children in Busan, Korea. Caffeine intakes were based only on beverages included in the Continuing Surveys of Food Intakes by individuals. The caffeine content of the beverages ranged from 2.8 to 65.2mg/100ml for cola, soft drinks, and teas. Caffeine was not completely absent from caffeine-free colas, juice, and milk. In this study, cola-type beverages were an important dietary source of caffeine in the children. Daily caffeine intake for children was estimated to range from 12.5 to 250 mg/day. In general, the acceptable daily intake (ADI) of caffeine should cover the entire population including children. Therefore, special considerations should be needed regarding the consumption of soft drinks containing caffeine to children below the 12 years of age.

Estimation of the Moisture Maximizing Rate based on the Moisture Inflow Direction : A Case Study of Typhoon Rusa in Gangneung Region (수분유입방향을 고려한 강릉지역 태풍 루사의 수분최대화비 산정)

  • Kim, Moon-Hyun;Jung, Il-Won;Im, Eun-Soon;Kwon, Won-Tae
    • Journal of Korea Water Resources Association
    • /
    • v.40 no.9
    • /
    • pp.697-707
    • /
    • 2007
  • In this study, we estimated the PMP(Probable Maximum Precipitation) and its transition in case of the typhoon Rusa which happened the biggest damage of all typhoons in the Korea. Specially, we analysed the moisture maximizing rate under the consideration of meteorological condition based on the orographic property when it hits in Gangneung region. The PMP is calculated by the rate of the maximum persisting 12 hours 1000 hPa dew points and representative persisting 12 hours 1000 hPa dew point. The former is influenced by the moisture inflow regions. These regions are determined by the surface wind direction, 850 hPa moisture flux and streamline, which are the critically different aspects compared to that of previous study. The latter is calculated using statistics program (FARD2002) provided by NIDP(National Institute for Disaster Prevention). In this program, the dew point is calculated by reappearance period 50-year frequency analysis from 5% of the level of significant when probability distribution type is applied extreme type I (Gumbel distribution) and parameter estimation method is used the Moment method. So this study indicated for small basin$(3.76km^2)$ the difference the PMP through new method and through existing result of established storm transposition and DAD(Depth-Area-Duration). Consequently, the moisture maximizing rate is calculated in the moisture inflow regions determined by meteorological fields is higher $0.20{\sim}0.40$ range than that of previous study. And the precipitation is increased $16{\sim}31%$ when this rate is applied for calculation.

Effects of Iron from an Amino Acid Complex on the Iron Status of Neonatal and Suckling Piglets

  • Wei, K.Q.;Xu, Z.R.;Luo, X.G.;Zeng, L.L.;Chen, W.R.;Timothy, M.F.
    • Asian-Australasian Journal of Animal Sciences
    • /
    • v.18 no.10
    • /
    • pp.1485-1491
    • /
    • 2005
  • This experiment was conducted to investigate the effects of iron from an amino acid complex (Availa-$Fe^{\circledR}$) on the iron status of neonatal and suckling piglets. A total of 24 gestating sows (Landrace${\times}$Large White) were randomly allocated to three dietary treatments. The control diet contained 80 mg $kg^{-1}$ Fe from ferrous sulfate heptahydrate ($FeSO_4$.$7H_2O$), while the two experimental diets were supplemented with an additional 120 mg $kg^{-1}$ Fe from Availa-$Fe^{(R)}$ or $FeSO_4$.$7H_2O$, respectively. The lactating sows remained the same iron treatments as gestating sows, while neonatal piglets of 24 litters born from the above sows were allotted to another three treatments. Piglets from the sows of the control treatment were fed basal diet with no supplemental Fe as control treatment, but were injected with 100 mg Fe as Fe dextran at birth. Piglets from the sows of Availa-$Fe^{(R)}$ or $FeSO_4$.$7H_2O$ treatments were supplemented with 120 mg $kg^{-1}$ iron from Availa-$Fe^{(R)}$ or $FeSO_4$.$7H_2O$, respectively. The total born alive and weaned, and the average piglets weight at birth and at weaning were not significantly affected by the sow' dietary treatments (p>0.05). Iron from Availa-$Fe^{(R)}$ did not demonstrate a statistically significant improvement in hemoglobin concentration, hematocrit and plasma iron of sows on day 90 and 105 of pregnancy and the milk iron of sows during lactation (p>0.05). Neonatal piglets in the Availa-$Fe^{(R)}$ treatment had a significantly higher hemoglobin concentration (p<0.05) and higher hematocrit and plasma iron (p>0.05) than those in the other two treatments, respectively. The hemoglobin of suckling piglets in the Availa-$Fe^{(R)}$ treatment was higher than that of piglets in $FeSO_4$.$7H_2O$ treatment on day 28 (p<0.05). The total iron binding capacity of piglets in Availa-$Fe^{(R)}$ treatment was lower than that of piglets in the control and $FeSO_4$.$7H_2O$ treatment on day 14 (p<0.05), but there was not a statistically significant difference among three treatments on day 28 (p>0.05). However, the hemoglobin and hematocrit of suckling piglets injected with Fe were higher than those of piglets in the other two treatments (p<0.05). This study indicated that the addition of 120 mg $kg^{-1}$ iron from amino acid complex into the diets improved iron status of neonatal and nursing piglets more effectively than the addition of 120 mg $kg^{-1}$ iron from $FeSO_4$.$7H_2O$, however, this improvement of the organic Fe was not sufficient to replace the Fe injection for prevention of iron-deficiency anemia.

A STUDY ON THE MICROLEAKAGE OF DENTIN BONDING SYSTEMS (상아질 접착제의 미세누출에 관한 연구)

  • Son, Jeong-Min;Choi, Nam-Ki;Kim, Seon-Mi;Yang, Kyu-Ho;Park, Yang, Ji-il
    • Journal of the korean academy of Pediatric Dentistry
    • /
    • v.35 no.4
    • /
    • pp.619-627
    • /
    • 2008
  • The objective of this study was to compare the microleakage of five adhesive systems in the enamel and dentin of permanent teeth. Class V cavity preparations with occlusal margins in enamel and gingival margins in dentin were prepared on both buccal and lingual surfaces of 25 extracted human molar teeth. The tested adhesives were: Adper Scotchbond Multi-purpose Plus Adhesive (SM), Adper Single bond 2 (SB), Clearfil SE Bond (SE), Adper Prompt L-Pop (PL) and G-Bond (GB). The results were as follows: 1. At the enamel margins, PL showed the highest leakage value(0.85), and others showed values of SB(0.55), GB(0.50), SM(0.35) and SE(0.25) in decreasing order. There were statistically significant differences in PL vs. SM and PL vs. SE(p<0.05). 2. At the dentin margins, GB showed the highest leakage value(2.10), and others showed values of SE(1.45), PL(1.40), SB(1.05), SM(0.70) in decreasing order. There were statistically significant differences in GB vs. SB and GB vs. SM(p<0.05). 3. Dentin margins showed high dye penetration rate than enamel margins in all material tested groups and there were statistically significant differences for SE, PL and GB.

  • PDF

STUDY ON THE SHEAR BOND STRENGTH OF ALL-IN-ONE DENTIN BONDING SYSTEM (우치에 대한 All-in-one 상아질 결합제의 전단결합강도 비교 연구)

  • Park, Hyung-Joo;Yoo, Seung-Hoon;Kim, Jong-Soo
    • Journal of the korean academy of Pediatric Dentistry
    • /
    • v.33 no.4
    • /
    • pp.661-672
    • /
    • 2006
  • This study was performed to compare the shear bond strength of AQ Bond $Plus^{TM}$ with AQ $Bond^{TM}$ and Single $Bond^{TM}$. Also by observing the fractured interface under scanning electro-microscope, the fracture pattern and the quality of hybrid layer were analyzed. The possibility of clinical application of all-in-one system which has an advantage to reduce chair time for children with difficult behavior pattern was evaluated, The results obtained are as follows ; 1. There was no significant difference between AQ $Bond^{TM}$ and AQ Bond $Plus^{TM}$ in shear bond strength and Single Bond showed the highest bond strength with statistical significant difference (p<0.05). 2. Adhesive fracture pattern was mainly observed in both enamel/dentin in AQ $Bond^{TM}$ and AQ Bond $Plus^{TM}$ group while Single Bond group showed equal numbers for cohesive and adhesive pattern. 3. Under scanning electro-microscope, resin tags observed in AQ $Bond^{TM}$ and AQ Bond $Plus^{TM}$ were very weak and tangled while strong and thick tags were shown with many lateral branches in Single Bond. Careful case selection and accurate clinical application is recommended when using AQ $Bond^{TM}$ and AQ Bond $Plus^{TM}$considering the result showing its weaker strength than Single $Bond^{TM}$.

  • PDF

A Comparison of Species Composition and Stand Structure of the Forest Vegetation between Inhabited and Uninhabited Island in the South Sea, Korea (유인도서와 무인도서 산림식생의 종조성 및 군락 구조 비교)

  • Kim, Jun-Soo;Jeon, Chul-Hyun;Jung, Sung-Cheol;Kim, Chan-Soo;Won, Hyun-Gyu;Cho, Joon-Hee;Cho, Hyun-Je
    • Korean Journal of Environment and Ecology
    • /
    • v.30 no.4
    • /
    • pp.771-782
    • /
    • 2016
  • For basic information collection for the ecological management of forest vegetation in Korean island areas, forest vegetation between inhabited(Daemodo) and uninhabited(Gudo) island was classified in the Z-M phytosociological method and their ecological characteristics in terms of both floristic composition and structure analyzed. Forest vegetation of Daemodo and Gudo were divided into a total of 11 units and 8 units, respectively. Total cover and species diversity index(H') of forest vegetation showed significant differences between the two island, Daemodo has a high value in the tree layer, but, Gudo has a high value in the shrub layer. Composition of Life forms, Daemodo was N-$R_5-D_2$-e and Gudo MM-$R_5-D_2$-e. Family importance value(FIV), Daemdo has a high value in Theaceae(12.2) and Pinaceae(12.0) and Gudo in Lauraceae(16.5) and Fagaceae (11.6). The percentage of the total number of species in the family level, Daemodo is Asteraceae(4.5%) was the highest and Gudo is Liliaceae(7.3%). Indicator species of forest vegetation of the two islands, Daemodo is Nanophanerophytes(N) including Smilax china, Ligustrum japonicum and Eurya japonica was significant inicator species and Gudo is Megaphanerophytes(MM) including Dendropanax morbiferus, Castanopsis sieboldii and Actinodaphne lancifolia.

Ecological Characteristics of Rhodotypos scandens Habitat in Imsil-gun, Jeollabuk-do, Korea (전라북도 임실군 병아리꽃나무 자생지의 생태적 특성)

  • Park, Kyung-Uk;Beon, Mu-Sup;Oh, Hyun-Kyung;You, Ju-Han
    • Journal of Environmental Impact Assessment
    • /
    • v.24 no.4
    • /
    • pp.352-366
    • /
    • 2015
  • The purpose of this study is to offer the basic data to the habitat conservation and management by surveying and analysing the ecological characteristics such as the flora, vegetation structure and soil of Rhodotypos scandens habitat. The flora were summarized as 131 taxa including 57 families, 99 genera, 107 species, 1 subspecies, 17 varieties and 6 forms. The life forms grouped as in the follows; the megaphanerophytes(MM) were 21 taxa, 24 taxa of the microphanerophytes(M), 30 taxa of nanophanerophytes(N), 6 taxa of chamaiphytes(Ch), 20 taxa of hemicryptophytes(H), 17 taxa of geophytes(G), 12 taxa of therophytes(Th) and 1 taxa of hydrophytes(HH). The present conditions of communities were 8 types including Zelkova serrata, Quercus aliena, Ulmus parvifolia, Rhamnella frangulioides, Castanea crenata, Albizia julibrissin, Celtis sinensis and Robinia pseudoacacia. In case of the dominant species by layers, the tree layer species were Zelkova serrata, Quercus aliena, Ulmus parvifolia, Castanea crenata, Albizia julibrissin, Celtis sinensis and Robinia pseudoacacia, and the subtree layer species were Rhamnella frangulioides, Q. aliena, Z. serrata, A. julibrissin, U. parvifolia and Broussonetia kazinoki. The shrub layer species was Rhodotypos scandens. In the results of analyzing the diversity index, $H^{\prime}{_{max}}$ from 1.691 to 2.610, from 2.197 to 3.466 in H'max, from 0.646 to 0.903 in J' and from 0.097 to 0.354 in D. In the results of analysing the soil, there showed that acidity was 5.6, 0.5dS/m of electrical conductivity(EC), 59.1mg/kg of available $P_2O_5$, 49.7% of organic matter content, $0.4cmol^+/kg$ of exchangeable $K^+$, $13.5cmol^+/kg$ of exchangeable $Ca^{2+}$, $3.3cmol^+/kg$ of exchangeable $Mg^{2+}$.

Enhancement of Immune Activities of Peptides from Asterias amurensis Using a Nano-encapsulation Process (나노 입자 불가사리 펩타이드의 면역 활성 증진)

  • Jeong, Hyang-Suk;Oh, Sung-Ho;Kim, Seoung-Seop;Jeong, Myoung-Hoon;Choi, Woon-Yong;Seo, Yong-Chang;Choi, Geun-Pyo;Kim, Jin-Chul;Lee, Hyeon-Yong
    • Korean Journal of Food Science and Technology
    • /
    • v.42 no.4
    • /
    • pp.424-430
    • /
    • 2010
  • Immuno-modulatory activities of peptides from Asterias amurensis were investigated using a nano-encapsulation process. The molecular weights of the peptides in the range of 5-7 kDa were separated using Sephadex G-75 gel filtration. Eighty-five percent of the nano-particles were in the 300 nm range using dynamic light scattering. The cytotoxicity of the A. amurensis nano-particles against CCD-986sk human dermal fibroblast cells was 11.64% after adding 1.0 mg/mL of the samples, which was lower than that from the control (13.28% collagen). The secretion of $NO^-$ from macrophages was estimated as $40\;{\mu}M$ after adding 1.0 mg/mL of gelatin nano-particles, which was higher than the others. Prostaglandin $E_2$ production from UV-induced human skin cells decreased greatly to 860 pg/mL after adding 1.0 mg/mL of the samples. Confocal microscopy revealed that nano-particles effectively penetrated the cells within 1 hour. From these results, we consider that nano-encapsulation of the peptides from A. amurensis can improve their biological functions.

Influence of air abrasion and different dentin sealing techniques on microtensile bond strength to dentin (상아질의 봉쇄 시기와 표면처리 방법이 미세인장 결합강도에 미치는 영향)

  • Kang, Dong-Ho;Han, Chong-Hyun;Park, Jung-Won;Kim, Sun-Jai
    • The Journal of Korean Academy of Prosthodontics
    • /
    • v.48 no.1
    • /
    • pp.8-15
    • /
    • 2010
  • Purpose: The purpose of this study was to evaluate the effect of various methods of dentin bonding agent application and air abrasion pretreatment on microtensile bond strength between dentin and resin, using a self-etching adhesive system. Material and methods: Thirty freshly extracted human molars were obtained and divided into 6 groups of 5 teeth. A 2-step self etching adhesive system (Clearfil SE Bond) was used for all groups. The control specimens were prepared using a direct immediate bonding technique. The delayed dentin sealing specimens were prepared using an indirect approach without dentin prebonding. The immediate dentin sealing specimens were prepared using dentin prebonding immediately following preparation. Immediate dentin sealing teeth and delayed dentin sealing teeth had provisional restorations using Fermit for two weeks. Then all specimens of each group were divided into two groups of three, depending on air abrasion pretreatment. Composite "crowns" were incrementally built on and specimens were stored in water for 24 hours. All teeth were prepared for a microtensile bond strength test. Bond strength data were analyzed with a one-way ANOVA test, and post hoc comparison was done using the Scheffe's test. Results: The mean microtensile bond strengths of all groups were not statistically different from each other. Conclusion: When preparing teeth for indirect restorations, IDS and DDS with Clearfil SE bond, have no difference on the microtensile bond strength between dentin and resin. Air abrasion pretreatment did not affect the microtensile bond strength when using IDS and DDS with Clearfil SE bond.