• Restorative Dentistry and Endodontics
• /
• v.23 no.1
• /
• pp.443-460
• /
• 1998

The purpose of this study was to estimate the changes of tensile bond strength according to the difference in lining materials and lining area. Seventy non-carious extracted human molars were used in the present study, and they were randomly assigned into 2 experimental groups according to the difference in lining materials. Each experimental group was subdivided into 3 groups according to the difference in lining area. Circular cavities were prepared on the dentin surface to a diameter of 1.5mm, 2.0mm, 2.5mm and the prepared cavities were filled with Fuji II LC( Glass Ionomer Cement : GIC) or Dycal. Dentin specimens without circular cavity were used as control group. The primer and bonding agent of All-Bond 2 and composite resin (Z-100, 3M Dental Products, U. S. A.) were applied to the exposed dentin surface with or without lining. Tensile bond strengths for the experimental specimens were then measured. To examine the interface between dentin and liner & between liner and composite resin, two specimens from each group were fabricated and observed under the SEM. The results were as follows. 1. Tensile bond strength for the specimens lined with GIC was higher than that for specimens lined with Dycal. However, there was no significant difference between two groups(p>0.05). 2. Tensile bond strength for the specimens lined with GIC in a diameter of 1.5mm(GIC-1.5mm lining group) was statistically higher than that for the GIC-2.0mm lining group and GIC-2.5mm lining group(p<0.05). 3. Tensile bond strength for the specimens lined with Dycal in a diameter of 2.5mm (Dycal-2.5mm lining group)was statistically lower than that for Dycal-1.5mm lining group and Dycal-2.0mm lining group(p<0.05). 4. It was possible to observe the good adhesion of the resin composite to the GIC and the presence of a fissure between GIC and dentin all along the interface. Interfacial gaps of 7.2-$72.2{\mu}m$ between GIC and dentin were observed. The interfacial gap between GIC and dentin at the cavity base was greater. However, the gap was gradually decreased toward the occlusal portion. 5. It was possible to observe the poor adhesion of the resin composite to the Dycal. The detachment of Dycal was occurred all along the composite resin-Dycal interface, and the gaps of 2.0-$30.1{\mu}m$ were formed. In all the specimens, polymerization shrinkage of resin composite caused the detachment of Dycal from the body of Dycal. At a Dycal-dentin interface. it was possible to observe the good adhesion. but poor adhesion with interfacial gap of 2.9-$26.8{\mu}m$ was observed partially.

• Journal of the Korean Applied Science and Technology
• /
• v.36 no.2
• /
• pp.676-684
• /
• 2019

The Pictet-Spengler reactions have widely known for the organic synthesis or biosynthesis of biologically active compounds, tetrahydro-${\beta}$-carbolines. We have developed the simple and efficient synthetic method for the synthesis of ${\beta}$-carbolines in water. Their chemical structures were characterized by nmr and UPLC/MS/QTOF. Calculated masses of compound 1 ($C_{17}H_{17}N_2$ 249.1392), 2 ($C_{17}H_{23}N_2$ 255.1861), 3 ($C_{19}H_{21}N_2O_3$ 325.1552) and 4 ($C_{19}H_{19}N_2O$ 279.1497) were almost identical with the detected masses of compound 1 (249.1315), 2 (255.1789), 3 (325.1460) and 4 (279.1364) respectively. Those synthesized four compounds showed strong antibiotic activity against the common E. coli.

• Journal of Chest Surgery
• /
• v.25 no.3
• /
• pp.296-306
• /
• 1992

A 6 year experience with the bileaflet St. Jude Medical valve is reported. Between Feb. 1986 and Dec. 1992, 68 patients received 87 such valves[36 mitral, 13 aortic, and 19 double mitral-aortic valve replacements]. The results are summarized as follows 1. There were 35 male and 33 female patients ranging in age from 17 to 55 years the mean age of 35.3 $\pm$ 9.7 years. 2. The mean aortic clamp time[ACT] of the MVR, AVR and DVR groups were 91.5$\pm$16.4, 117.2$\pm$28.7 and 165.5$\pm$24.1 minutes. The mean total bypass time [TBT] of the MVR, AVR and DVR groups were 112.8$\pm$19.5, 134.7$\pm$31.4 and 192.2$\pm$28.5 minutes. 3. Eighty seven valves were used [55 mitral site, 32 aortic site]. 31mm[20], 33mm[15], 29mm[15], 27mm[2], 25mm[2] and 35mm[1] were used in mitral site and 23mm[13], 21mm[8], 19mm[7] and 25mm[4] were used in the aortic site. In the DVR, there were valve combinations such as 4 cases of M[29mm]-A[19mm], 4 of M[31mm]-A[23mm], 3 of M[33mm]-A[23mm] and others. 4. Preoperative NYHA functional classes were II [3 cases], III [46 cases], IV[19 cases] and improved to I [52 cases] and Il [13 cases] postoperatively. 5 Early postoperative complications were occurred in 15 cases[2Z.l%] and there were LOS in 5 cases[7.4%], arrythmia [3 cases], wound infection [2 cases], hepatitis [2 cases], sudden cardiac arrest [2 cases] and postoperative bleeding [1 case]. The early hospital death was occurred in 3 cases[4.4%] with LOS [1 case] and sudden cardiac arrest [2 cases]. 6. Mean follow-up time of survival cases[65 cases] was 31.3$\pm$21.9 months and the total follow-up time was 169.8 patient-years. Late postoperative complications were occurred in 4 cases[2 thromboembolism, 1 paravalvular leak, 1 thromboembolism br paravalvular leak, 1 valve endocarditis] with the occurrence rate as 2.35% per patient-years. Reoperation was performed in 2 cases [1 paravalvular leak, 1 left atrial thrombus] and there was one [1.5%] late valve related death. Therefore the 6 year complication free rate was 90.6% and 6 year actuarial survival rate was 98.3$\pm$1.7%. On the basis of this experience and the results, SJMvalve appears to be one of the best performing mechanical prosthesis currently available, in terms of both hemodynamics and lower complications with warfarin antioagulation.

• Asian Pacific Journal of Cancer Prevention
• /
• v.14 no.10
• /
• pp.6115-6120
• /
• 2013

Introduction: Some non-small cell lung cancer (NSCLC) tumor cells are insensitive to tumor necrosis factor-related apoptosis-inducing ligand (TRAIL) -based therapy. This study was conducted to examine the effect of embelin on the sensitivity of the A549 NSCLC cell line to TRAIL receptor2 (TRAILR2) monoclonal antibodies and to investigate the potential mechanisms. Materials and Methods: A549 cells were treated with embelin, TRAILR2 mAb or a combination of both. Cell viability was measured using ATPlite assay and apoptosis rates were determined by flow cytometry with AnnexinV-FITC and propidium iodide staining, with the expression levels of proteins analyzed by Western blotting. Results: The cell survival rate of separate treatments with 100 ng/ml TRAILR2 antibody or 25 uM embelin were $81.5{\pm}1.57%$ and $61.7{\pm}2.84%$, respectively. Their combined use markedly decreased cell viability in A549 cells to $28.1{\pm}1.97%$ (P<0.05). The general caspase inhibitor Z-VAD-FMK could inhibit the embelin-enhanced sensitivity of A549 cells to TRAILR2 mAb ($75.97{\pm}3.17%$)(P<0.05). Both flow cytometry and cell morphological analysis showed that embelin was able to increase TRAIL-induced apoptosis in A549 cells. Combined treatment with embelin and TRAILR2 mAb augmented the activation of initiator caspases and effector caspase. In addition, A549 cells showed increasing levels of TRAILR2 protein and decreasing levels of Bcl-2, survivin and c-FLIP following the treatment with embelin+TRAILR2 mAb. Conclusions: Embelin could enhance TRAIL-induced apoptosis in A549 cells. The synergistic effect of the combination treatment might be due to modulation of multiple components in the TRAIL receptor-mediated apoptotic signaling pathway, including TRAILR2, XIAP, survivin, Bcl-2 and c-FLIP.

• Restorative Dentistry and Endodontics
• /
• v.30 no.5
• /
• pp.363-371
• /
• 2005

This study investigated the effect of thickness of flowable resin lining on marginal leakage in class II composite restorations. 80 experimental teeth were prepared with class II preparations with enamel margin or dentin margin. Each group was devided into four groups according to flowable resin lining thickness ; Control group - no flowable resin lining, Group 1 - 0.5 mm flowable resin lining, Group 2 - 1 mm flowable resin lining, Group 3 - 2 mm flowable resin lining. The cavities were restored using Scotchbond Multi-Purpose adhesive system, Filtek Flow and Filtek Z 250 composite resin. Following one day storage in distilled water, the restored teeth were thermocycled for 500 cycles and immersed in $2\%$ methylene blue for 24 hours. The results of this study were as follows : 1. Ranking of mean microleakage scores at the enamel margins was Group 1 < Control = Group 2 < Group 3. The microleakage of Group 3 was significantly higher than that of Control, Group 1 and Group 2 (p < 0.05). 2. Ranking of mean microleakage scores at the dentin margins was Group 1 < Group 2 < Control < Group 3. The microleakage of Group 3 was significantly higher than that of Control, Group 1 (p < 0.05) 3. Compared with microleakage between the enamel and dentin margins, enamel margin group were significantly lower than dentin margin group.

• Journal of Periodontal and Implant Science
• /
• v.35 no.2
• /
• pp.511-524
• /
• 2005

The regeneration of lost periodontal tissue is a major goal of therapy. Periodontal ligament cell(PDL) is a specialized connective tissue that connects cementum and alveolar bone to maintain and support teeth in situ and preserve tissue homoeostasis. Bone morphogenetic proteins(BMPs) have shown much potential in the reconstruction of the periodontum by stimulate new bone and new cementum formation. Limitiations of BMP administration to periodontal lesions is high dose delivery, BMP transient biological activity, and low bioavailability of factors at the wound site. Gene delivery method can be alternative treatment strategy to deliver BMPs to periodontal tissue. The purpose of this study is to investigate efficiency of BMP-2 gene delivery with cell-based therapy using PDL cells. PDL cell were transduced with adenoviruses encoding either BMP-2 or Lac-Z gene. To evaluate osteogenic activity of expressed BMP-2 on PDL cells, we investigated secreted BMP-2, cellular activity, ALPase, produced mineralized nodules. To evaluate collagen scaffold as carrier for transduced cell delivery, we examined morphology and secreted BMP-2 of transducd PDL cells on it. BMP-2 transducd PDL cells produced higher levels of BMP-2, ALPase, mineralized nodules than non transduced cells. Cellular activity of transduced cells was showed similar activity to non transduced cells. Transduce cells attached on collagen scaffold secreted BMP-2 at 7day and was showed similar morphology to non transduced cells. These results demonstrated that transduced PDL cells produced biologically active BMP-2 and collagen scaffold could be carrier of transducd cells.

• Journal of Korean Society of Forest Science
• /
• v.79 no.2
• /
• pp.138-143
• /
• 1990

In mature stand of Japanese larch (Larix leptolepis(S. et Z.) Gordon) planted in 1925, heartrot damage was investigated by felling some infected trees with fruit bodies of two butt-rot fungi, Phaeolus schweinitzii and Sparassis crispa. Percentage of heartrot area on basal area of decay trees was 19.2-74.4, and the height reached by the decay was 1.2-5.5m. Percentage of decay volume was in the range of 2.2-13.4%, but the loss wood to the height reached by the decay amounted to 27.2% (range 13.1-37.1%) of whole volume, Decay damage caused by S. crispa was much greater than that caused by P. schweinitzii. Compressive strength ($52-77kg/cm^2$) and specific gravity (0.40-0.47) of rot wood was reduced to 77% and 39% respectively in maximum as compared to sound wood of healthy tree, and those of sound-looking wood close by heartrot to 42% and 26%. The current annual growth of trees with decay was fallen behind that of sound tree from eight to fourteen years after planting in D. B. H. and from twelve to twenty-one years after in volume.

• Journal of the Korean Society of Fisheries and Ocean Technology
• /
• v.57 no.1
• /
• pp.34-44
• /
• 2021

In order to collect basic information of response behavior of red seabream (Pagrus major) during pilling, works for constructing wind power station in Byeonsan Peninsular, Korea were investigated. Four cultured red seabream CRB1 to CRB4 [total length (TL): 27.1 ± 1.0 cm; body weight: 359 ± 30 g] were tagged with an acoustic tag and used in experiment. CRB1 and CRB2 to CBR4 were released on the sea surface at same time around the constructing site of the wind power plant on September 22, 2017 and July 18, 2018, respectively. The tracking of the CRB1 to CRB2 and CRB3 to CRB4 were conducted for two hours, approximately, using VR100 receiver including a directional hydrophone and VR2W receivers array consisted of 19 presence/absence receivers (VR2W receivers), respectively. The underwater noise level before (no pile driving works) and during pile driving works was measured 116.0-118.0 dB (re 1��Pa) and a maximum of 160 dB (re 1��Pa), respectively. CRB1 moved about 6.0 km with average swimming speed of 80.2 ± 20.5 cm/s for 2.1 hours without pile driving work. The average water depth of the sea bed on the route of CRB1 was 9.1 ± 0.4 m. CRB2 moved about 7.3 km with the average swimming speed of 96.8 ± 27.1 cm/s for 2.1 hours with pile driving work. The water depth of the sea bed on the route of CRB2 was 11.9 ± 0.6 m. At results of the Rayleigh's z-test two fishes CRB1 and CRB2 showed significant directionality in the movement (p < 0.01). Movement mean angles of CRB1 and CRB2 were 92.7 and 251.8°, respectively. CRB2, CRB3 and CRB4 exhibited the escaping behavioral response from the noise of source during the pile driving work. The swimming speed of the CRB2 exposed on the heavy underwater noise stimuli due to the pile driving work was 1.21 times faster than that of the CRB1 exposed on the ambient underwater noise in the study site.

• Journal of the korean academy of Pediatric Dentistry
• /
• v.44 no.4
• /
• pp.446-454
• /
• 2017

Recently, there have been many studies on bulk-fill resin composites. However, studies on the proper materials for pediatric patients are rare. The aim of this study was to compare the cavity wall adaptation of bulk-fill resin composites with conventional resin composite in class II cavities of primary molars using microcomputed tomography (micro-CT). Standardized class II slot cavities were prepared in 80 exfoliated primary molars and randomly divided into 4 groups. The control group was restored with conventional resin composite, Filtek Z-350 XT (FZ), and the three groups were restored with bulk-fill resin composites, Filtek bulk-fill posterior (FB), Tetric N-Ceram Bulk Fill (TNC), Filtek bulk-fill flowable (FBF). All specimens were thermocycled and then immersed in 50% silver nitrate ($AgNO_3$) solution. Micro-CT was used to measure the penetration volume of the total silver nitrate and the degree of cervical marginal leakage and the number, size, and position of the voids were evaluated. The results revealed that the volume of silver nitrate were significantly different between FB and FZ (p < 0.05). The results also revealed that the penetration length of silver nitrate FBF showed statistically lower than the FZ and FB (p < 0.05). There was no significant difference between the groups in number and size of voids. In conventional resin composite, most of the voids were present inside the restoration (83.3%), but the voids in the bulk-fill resin composites incidence were higher in the gingivoaxial angle. The cavity wall adaptation demonstrated in class II restorations of primary molar by new bulk fill resin composites was similar to conventional incremental technique. Bulk-fill resin composites might be an clinical option for a faster restoration in deciduous teeth.

• Restorative Dentistry and Endodontics
• /
• v.31 no.2
• /
• pp.103-112
• /
• 2006

This study investigated the hypothesis that the dentin bond strength of self-etching adhesive (SEA) might be improved by applying additional layer of bonding resin that might alleviate the pH difference between the SEA and the restorative composite resin. Two SEAs were used in this study; Experimental SEA (Exp, pH: 1.96) and Adper Prompt (AP, 3M ESPE, USA, pH: 1.0) In the control groups they were applied with two sequential coats In the experimental groups, after applying the forst coat of assigned SEAs, the D/E bonding resin of All-Bond 2 (Bisco Inc., USA, pH: 6.9) was applied as the intermediate adhesive. Z-250 (3M ESPE, USA) composite resin was built-up in order to prepare hourglass-shaped specimens . The microtensile bond strength (MTBS) was measured and the effect of the Intermediate layer on the bond strength was analyzed for each SEA using t-test. The fracture mode of each specimen was inspected using stereomicroscope and Field Emission Scanning Electron Microscope (FE-SEM). When D/E bonding resin was applied as the second coat, MTBS was significantly higher than that of the control groups . The incidence of the failure between the adhesive and the composite or between the adhesive and dentin decreased and that of the failure within the adhesive layer increased. According to the results , applying the bonding resin of neutral pH can increase the bond strength of SEAs by alleviating the difference in acidity between the SEA and restorative composite resin.