• Restorative Dentistry and Endodontics
• /
• v.49 no.3
• /
• pp.30.1-30.12
• /
• 2024

Objectives: The aim of the current study was to evaluate the effect of polishing systems and surface sealant on the color stability and whiteness index of single-shade resin composites after staining and bleaching. Materials and Methods: Three single-shade (Omnichroma, Charisma Diamond One, Zenchroma) and one multi-shade (Filtek Z250) materials were tested. From each resin composite, 40 specimens were prepared. The specimens were divided into 4 subgroups (n = 10) according to the surface treatments: 1-step polishing, 1-step + Biscover LV, 2-step polishing, and 2-step polishing + Biscover LV. Color differences (ΔE₀₀) were calculated after being immersed in the coffee solution for 12 days. After the staining, the specimens were immersed in a whitening mouthrinse (Crest-3D White) for 12 hours. Whiteness index differences (ΔWI_D = WI_D after staining - WI_D after bleaching) values were recorded. The generalized linear model was used for analysis (p< 0.05). Results: The lowest and highest ΔE₀₀ values were found for Zenchroma and Charisma Diamond One respectively. Sealed groups indicated higher ΔE₀₀ values than nonsealed groups with significant differences (p = 0.008). The lowest and highest ΔWI_D values were found for Zenchroma and Charisma Diamond One respectively. Sealed groups indicated lower ΔWI_D values than nonsealed groups with significant differences (p = 0.022). Conclusions: The use of surface sealant increased the discoloration and showed less whiteness change in resin materials. When the 1-step was compared with the 2-step polishing, the effects on the color stability and whiteness index values of the resin materials were similar.

• Journal of Korean Dental Science
• /
• v.17 no.3
• /
• pp.105-111
• /
• 2024

Purpose: Research comparing and evaluating the properties of various dental materials is an important topic in the field of dentistry. This study aims to evaluate the fluoride release and microhardness properties of various fluoride-containing restorative materials used in dental treatments. Materials and Methods: Thirty specimens of four restorative materials were prepared (5 mm × 2 mm, cylindrical): alkasite-based material (Cention N, CN), Self-cure glass Ionomer (Riva self cure, RS), Resin-modified glass ionomer cement (Fuji LC II, FL) and composite resin (Filtek Z350XT, FZ). Fluoride release measurements were conducted on 25 specimens at intervals of 1, 2, 6, 13, 20, and 27 days with a fluoride electrode connected to the pH/ISE Meter (Orion Star A214, Thermo Scientific, USA) and cumulative fluoride release was calculated. Vickers microhardness measurements were performed on five specimens from each material with microhardness tester (DM2D, AFFRI, Italy). Results: As a result of measuring the amount of fluoride release over 27 days, the amount of fluoride release in CN showed a gradual increase, while the amount of fluoride release in RS, FL, and FZ gradually decreased. The cumulative fluoride release amount for 28 days was significantly higher in CN and FL than in RS (P < 0.05). FZ and RS demonstrated significantly higher microhardness compared to CN and FL (P < 0.05). FZ and RS showed similar microhardness, and FL showed the lowest microhardness. Conclusion: Cention N (CN) exhibited superior fluoride release compared to Glass Ionomer Cement (RS), making it a promising option for preventing secondary caries. However, it displayed a lower microhardness than the composite resin (FZ), indicating potential limitations in terms of mechanical strength. Therefore, if an anti-caries action is required, Cention N may be considered first; however, it appears to be difficult to use in posterior permanent teeth.

• Journal of Korean Society of Forest Science
• /
• v.98 no.4
• /
• pp.496-503
• /
• 2009

Reclamation area is characterized by high soil salinity and high ground water table that are not favorable environment for tree growth. However, the increasing demand to convert the reclamation area from rice cultivation fields to industrial or residential complex, or parks accompanies the idea of introduction of trees in the area. This study aimed to suggest better performed tree species for the tree planting in the Seosan reclamation area, Chungchungnam-do. Seedlings of 8 tree species (Pinus densiflora, Pinus thunbergii, Metasequoia glyptostroboides, Chionanthus retusus, Cornus kousa, Prunus sargentii, Quercus acutissima, and Zelkova serrata) were planted in 4 types of 10 m ${\times}$ 10 m experimental plots. The survival rate and the height growth of seedlings were measured from April 2006 to November 2008 on an annual basis. The experimental plots were constructed using 2 different soil material (dredged sand and dredged sand + forest soil), and 2 soil covering depth (1.5 m and 2.0 m). The tree species showed different survival rates for 3 years since planting (F = 9.632, P < 0.001). C. kousa, Q. acutissima, and P. sargentii showed high mortality rate while P. thunbergii, M. glyptostroboides and Z. serrata showed lower mortality rates. The seedling height growth for 3 years was also significantly different among species (F=4.749, P=0.002). Most of seedlings showed lower height growth in the second year, and the growth began to recover in the third year after transplanting. The survival rate and the growth of the seedlings were better in higher soil covering depth and forest soil material plots regardless of species. The combination of rank orders in survival rate and relative height growth indicates that P. thunbergii, M. glyptostroboides and Z. serrata would perform better than other species used in the experiment, while C. retusus, C. kousa and P. sargenti may not adapt well to this area.

• Journal of the korean academy of Pediatric Dentistry
• /
• v.44 no.1
• /
• pp.72-81
• /
• 2017

The aim of this study was to evaluate the effectiveness of artificial saliva contamination and decontamination procedures at different stages of a bonding procedure on the microtensile bond strength (MTBS) of two one-step self-etch adhesives and a two-step total-etch adhesive to dentin of primary teeth. Forty-two extracted sound primary molars were randomly divided into three groups depending on three adhesives, Scotchbond Universal Adhesive (SBU), All-Bond Universal (ABU) and Prime & Bond NT (PNT). For each adhesive, the teeth were allocated into seven groups. Except for control group, group 1, the groups were contaminated with artificial saliva at three different stages: the groups 2 and 3 - before adhesive application; the groups 4 and 5 - before adhesive polymerization; the groups 6 and 7 - after adhesive polymerization. Decontaminating procedures were rinsing, air-drying (group 2, 4, 6) and air-drying (group 3, 5, 7). The specimens were restored with composite resin (Filtek, Z350) and microtensile bond strength was measured. The data was analyzed with one-way ANOVA and Tukey HSD test (p < 0.05). In the control group, using PNT resulted in significantly higher bond strength than when ABU and SBU were used (p < 0.001). For three adhesives, the groups 2, 4 and 6 had greater bond strength than the groups 3, 5 and 7. Also, when the artificial saliva was contaminated before adhesive polymerization (group 4, 5), it showed a significantly lower bond strength. Generally the two-step total-etch adhesive generated a higher bond strength than the one-step self-etch adhesive. Artificial saliva contamination before adhesive polymerization led to a drastic decrease in bond strength, and rinsing with water followed by air-drying could not recover the bond strength.

• Journal of Korean Society of Forest Science
• /
• v.105 no.4
• /
• pp.510-516
• /
• 2016

This study was conducted to investigate the physiological responses of newly-germinated seedlings of Fraxinus rhynchophylla Hance, Zelkova serrata (Thunb.) Makino, Betula costata Trautv. and Quercus variabilis Blume to open-field experimental warming. The seedlings in the warmed plots were warmed with $2.7^{\circ}C$ higher air temperature than those in the control plots using infrared heaters since April, 2015. Physiological responses (stomatal conductance, transpiration rate, chlorophyll content and net photosynthetic rate) to experimental warming varied with the species and the time of the measurement. Stomatal conductance ($mmol{\cdot}m^{-2}{\cdot}s^{-1}$) tended to decrease for F. rhynchophylla (Control: $158.97{\pm}42.76$; Warmed: $42.07{\pm}8.24$), Z. serrata (Control: $170.53{\pm}27.22$; Warmed: $101.17{\pm}42.27$) and B. costata (Control: $249.93{\pm}47.39$; Warmed: $150.73{\pm}26.52$). Transpiration rate ($mmol{\cdot}m^{-2}{\cdot}s^{-1}$) also decreased for F. rhynchophylla (Control: $4.08{\pm}0.62$; Warmed: $1.74{\pm}0.39$), Z. serrata (Control: $4.32{\pm}0.44$; Warmed: $3.24{\pm}1.14$) and B. costata (Control: $6.21{\pm}0.38$; Warmed: $4.66{\pm}0.28$). However, warming exhibited only minimal effects on stomatal conductance and transpiration rate of Q. variabilis seedlings. Chlorophyll content increased by the warming treatment while the effect of warming was not significant on net photosynthetic rate, since the warming treatment had a weak influence for changing net photosynthetic rate.

• Clinical and Experimental Pediatrics
• /
• v.52 no.7
• /
• pp.811-817
• /
• 2009

Purpose : Inhaled corticosteroids (ICS) are used as first-line agents for the treatment of persistent asthma; however, their use is accompanied by apprehension of potential systemic adverse effects. This study aimed to assess the effects of ICS on bone mineral density (BMD) and bone metabolism in children with asthma. Methods : From February 2008 to September 2008, 26 asthmatic children treated with ICS (ICS group), 15 asthmatic children treated with leukotriene receptor antagonist (LTRA) (LTRA group), and 30 healthy children (Control group) were selected from the Korea University Anam Hospital. BMD and serum bone-specific alkaline phosphatase (BALP) levels were measured. The asthmatic children underwent spirometry and methacholine bronchial challenge test. Results : There were no significant differences in BMD in the lumbar spine (P=0.254) and proximal femur (P=0.297) among the 3 groups. The serum BALP levels were significantly higher in both the ICS (P=0.017) and LTRA (P=0.025) groups than in the Control group. None of the parameters pertaining to ICS use, such as the mean daily dose during the last 6 months, the total cumulative dose, duration of use, and age of commencement of use, showed significant correlations with BMD (P>0.05 for all parameters). Conclusions : We demonstrated that a low dose of ICS does not exert any significant adverse effect on bone metabolism in asthmatic children. These findings support the current recommendations with regard to the use of ICS for asthmatic children.

• Korean Journal of Soil Science and Fertilizer
• /
• v.29 no.1
• /
• pp.34-43
• /
• 1996

Determining the actual evapotranspiration(ETa) of a crop, and appropriate water management of the crop based on the ETa are very important For increasing the yield. The present study aimed at determining ETa and crop coefficient of sesame growing under different climatic conditions with the transparent thin polyethylene film mulch(0.03 mm thick) and without this mulch. Bottomless cylindrical lysimeters(105cm in diameter, 120cm in height, protruded 20 cm above the soil surface) were installed on the field of sandy loam "Bonyang series" soil with a moderate drainage. The determination of ETa was performed by measuring each component of a model equation, $ETa=(R+I)-\{Ro+(D1+D2)\}+C{\pm}{\Delta}S$. Sesame, cv. "Ansan" was sown in two rows with the spacing of $50{\times}15cm$ on May 10 in 1991 and 1992. The mulching covers 80% of the soil surface. Sesame consumed the water of 139.0 mm(1.53 mm/day) and 171.2 mm(1.59 mm/day) in ETa without the film mulch, but that of 132.6 mm(1.46 mm/day) and 199.8 mm(1.85 mm/day) with its mulching through both years of 1991 and 1992, respectively. The ETa's accounted for 52 and 69% of the potential evapotranspiration(ETp) in the mulched crop, and 54 and 59% of ETp in the non-mulched crop 1991 through 1992, respectively. Its ETa's were much more and their gap between the mulching and non-mulching treatment was larger in 1992 than in 1991 as a result of the better climatic condition of 1992.

• Journal of Korean Society of Forest Science
• /
• v.42 no.1
• /
• pp.74-82
• /
• 1979

Pinus densiflora S. et Z. which has the widest distribution and highest stock at present in Korea and has used as materials for fuel, house construction, furniture and many other purposes for several hundred years, is considered as one of major species of economic importance, although there are a few epidemic insect injuries and silvicultural difficulties in regeneration. However, since disorderly cutting has been conducted for long time, the valuable local stands have disappeared. Therefore immediate attempts should be taken on the gene conservation and genetic studies including heritabilities and genetic gains of desirable characters. One hundred and twently five plus trees have so far been selected from the nationwide area and kept for the purpose of seed orchard establishment and other theoretical studies. In this study, the wind pollinated seeds of grafted stocks of 13 plus trees in clone bank located in Suweon and the seeds of 4 Japanese plus trees were collected and their progenies were used for heritability study. As indicated in figure 1, thirteen plus trees are from the middle part of Korea and two experimental plantations were laid out in ]972 (1-1 stock) by the randomized block design with five replications, consisting of 10 trees line plots of each family in each replication. Tree height, root collar diameter and branch diameter at 1cm apart from the main stem were measured. The results are summarized as follows 1. The rank of height growth of each plus tree progenies by age was greatly changed under age 3 and it was affected more in poor site than good site. 2. The heritabilities of height growth were estimated to be 7.2% at age 3, negative sign at age 4, 9.4% at age 5, 13.0% at age 6, 8.1% at age 7 and abrupt increase of 63.8% at age 8. The heritabilities were generally increased with increase of age. 3. The heritabilities of root collar diameter and branch diameter (average of the three biggest branches) was 3.2% and 11.8% at age 8 respectively. 4. The genetic gain was largest at age 8 and it was 46.6% when a selection intensity, 1/500 was taken. It, therefore, seems to be reasonable that selection should not be made under age 7.

• Journal of the korean academy of Pediatric Dentistry
• /
• v.30 no.1
• /
• pp.161-170
• /
• 2003

The aesthetic restorative materials are widely used in recent dentistry, showed not only the different quality between each component but also showed that the environment of the material has important effect on the physical properties of the material. Especially, when the restoratives are restored in the mouth, and since saliva is existing, the restoratives are always exposed to water and affected by the saliva. The purpose of this study was to research and compare the change of the degree of water sorption after water immersion of three types of the resin-based materials and the compressive strength, and observe the relation between the change of the water absorbing degree and the compressive strength. Z-100(3M, U.S.A) as a composite resin, F-2000(3M, U.S.A) as a compomer and Vitremer Restoratives(3M, U.S.A) as a resin-modified GIC were used, and each specimen was made to measure the water sorption and to evaluate the compressive strength. The specimens for measurement of the water sorption and the compressive strength were divided into 4 groups(1 day, 2 weeks, 4 weeks, and 8weeks). Each specimen was filled in the 30cc vial with 20cc of distilled water during the fixed amount of period in $37^{\circ}C$. The water sorption is decided by dividing the difference of weight before and after the immersion by the volume, and the compressive strength was measured by using the instron after the immersion. The following results were obtained ; 1. The more the water sorption increased, the more the immersion period of three restorative materials was long. And the most of water sorption was obtained during the first 2 weeks(P<0.001). 2. The water sorption of resin-modified GIC was higher than composite resin and compomer. 3. The more the compressive strength decreased, the more the immersion period of three restorative materials increased(composite resin and compomer: P<0.001, resin-modified GIC: P<0.05). Especially, the amount of the reduction in compressive strength of the composite resin was the highest. 4. The more the water sorption of all materials increased, the more the compressive strength decreased(P<0.05).

• Clinical and Experimental Pediatrics
• /
• v.52 no.5
• /
• pp.576-580
• /
• 2009

Purpose : Growth-promoting attempts are widespread in Korea, but little is known about their prevalence or associated factors. This study was designed to assess the prevalence of growth-promoting attempts among children visiting a university growth clinic. Methods : A questionnaire-based survey was carried out with 823 children (416 boys, 407 girls) who visited the growth clinic at Paik Hospital. Results : The mean age of the subjects was $10.4{\pm}2.6$ yr, and the height z-score was $-1.58{\pm}0.91$. Approximately 33.4% of the children had tried growth promotion. Among the height-gain methods, herbal medicine was the most frequently used (37.8%), followed by health-promoting supplements (37.1%), exercise or machine (3.0%), and growth hormone treatment (2.9 %). The mean age at which the parents began to worry about their children's height was 7.7 yr. The mean age at which they started height-gain methods was 8.9 yr for herbal medicine, 9.1 yr for health-promoting supplements, 9.4 yr for exercise or machine, and 9.9 yr for growth hormone treatment. Motivating factors included advice from relatives or friends (36.0%), advertisements in the Internet or newspaper (28.4%), advice from pharmacist (16.8%), and advice from their medical doctor (5.5%). The degree of satisfaction from the height-gain methods was 29.1% with growth hormone treatment, 6.6% with exercise or machine, 6.4% with herbal medicine, and 2.8% with growth-promoting supplements. Conclusion : Approximately one third of the children reported use of growth-promoting methods, but the satisfaction rate was not high. The benefits of growth-promoting methods should be carefully weighed against their costs and side effects.