• Title/Summary/Keyword: $V_1$ 속도

Search Result 1,713, Processing Time 0.028 seconds

The Vibration Velocity and Vibration Level of Near-field Blasting Vibration in an Urban Blasting Site (근접장 발파진동에서 진동속도와 진동레벨의 비교)

  • Lee, Yeon-Soo;Chang, Seo-Il
    • Transactions of the Korean Society for Noise and Vibration Engineering
    • /
    • v.15 no.8 s.101
    • /
    • pp.918-923
    • /
    • 2005
  • The vibration level (dB(V)) and vibration velocity (cm/sec) on the ground and buildings due to the differences of the measuring sites from the blasting source was investigated. To compare with vibration level and vibration velocity theirs magnitude was not surely directly proportional and vibration velocity 0.1 cm/sec was $45\~50$ dB(V). The difference between the measured vibration level and the calculated vibration level by Ejima's equation using vibration velocity PVS(peak vector sum) showed $21.0\~30.9$ dB(V) on the ground, $15.3\~23.6$ dB(V) on the apartment, respectively. And the correlation of vibration velocity and nitration level at the measuring sites of lower altitude showed higher than that of higher altitude.

Stabilization Method for V/f Control with a MTPA operation of PMSMs (PMSM의 MTPA 운전이 가능한 V/f 제어 시 안정화 기법)

  • Park, Seung-Chan;Kim, Sang-Hoon
    • Proceedings of the KIPE Conference
    • /
    • 2019.07a
    • /
    • pp.404-405
    • /
    • 2019
  • 본 논문에서는 PMSM(Permanent magnet synchronous motor)의 MTPA(Maximum Torque Per Ampere) 운전을 고려한 V/f 제어 시 안정화 기법에 대해 제안한다. PMSM은 V/f 제어 시 부하 변동에 따라 탈조할 가능성이 있다. 제안된 기법은 안정도 개선을 위해 추정된 q축 전류를 이용하여 부하 변동정보를 얻고 이를 바탕으로 고정자 주파수를 변동하여 회전자 속도가 동기속도를 유지할 수 있는 안정화 기법을 적용하였다. 제안된 안정화 기법으로 저속 영역부터 약자속 영역까지 부하변동에도 안정적인 운전이 가능하도록 하였다. 1kW SPMSM의 모의실험을 통하여 제안된 기법의 효용성을 검증하였다.

  • PDF

A Study on the Creep Properties and Life Prediction of 1% Cr-Mo-V Steel Roter Shaft(I) (1% Cr-Mo-V 강 회전자 축의 크리이프 특성과 수명예측에 관한 연구(I))

  • 조판근;정순호;장윤석;이치우
    • Transactions of the Korean Society of Mechanical Engineers
    • /
    • v.10 no.4
    • /
    • pp.519-528
    • /
    • 1986
  • 본 연구에서는 우선 1차적으로 한국중공업에서 제조한 실제의 터어빈 회전자 축에서 시편을 채취하여 화력발전소 터어빈의 작동 온도에서의 크리이프 거동을 실험 하고, Larson-Miller 법 및 Orr-sherby-Dorn 법에 의하여 수명을 예상하엿으며 열처리 조건의 변화에 따른 크리이프 특성 변화를 고찰하였다.

효모의 생육에 관한 연구 (제1보) Methanol자화균의 분리와 배양

  • 신규철;양한철
    • Proceedings of the Korean Society for Applied Microbiology Conference
    • /
    • 1976.10a
    • /
    • pp.188.1-188
    • /
    • 1976
  • 주유소, 공장주변의 하수 및 토양으로부터 Methanol 자화성 효모 7주를 분리하고 그중 생육이 왕성한 균주 2주에 대하여 동정을 행한즉 양주, 모두 Candida속에 속하는 것으로 추정되었다. 양주는 모두 ethanol 자화성을 가지고 생육에는 Biotin을 요구하였다. 배양특성은 최적온도 $28^{\circ}C,$ 최적 pH4~5이고 methanol 농도 1% v/v에서 증식이 양호하였고, 균체수율은 대소비 methanol에 대하여 30~40%에 달하였다.

  • PDF

The Effect of Pressure on the Solvolysis of Benzylchlorides. p-Methoxybenzyl Chloride in Ethanol-Water Mixtures (염화벤질류의 가용매분해반응에 대한 압력의 영향. 에탄올-물 혼합용매내에서 p-메톡시 염화벤질의 분해반응)

  • Oh Cheun Kwun;Jin Burm Kyong;Kee Joon Choi
    • Journal of the Korean Chemical Society
    • /
    • v.30 no.3
    • /
    • pp.301-306
    • /
    • 1986
  • The rate constants for the solvolysis reactions of p-methoxybenzylchloride in ethanol-water mixtures were determined at 2$^{\circ}$ and 10$^{\circ}C$ up to 1600bar. Rates of reaction were increased with increasing temperature and pressure, and decreased with increasing solvent composition of ethanol mole fraction. From the rate constants, the values of the activation parameters (${{\Delta}V_o}^{\neq},\;{\Delta}{\beta}^{\neq},\;{\Delta}H^{\neq},\;and\;{\Delta}S^{\neq}$) were evaluated. The values of ${{\Delta}V_o}^{\neq}$ and ${\Delta}{\beta}^{\neq}$ exhibit the extremum behavior at about 0.30 mole fraction of ethanol. This behavior is discussed in terms of solvent structure variation. From these results, it could be postulated that the reaction proceeds through $S_N1$ mechanism.

  • PDF

Degradation Characteristics of Methyl Ethyl Ketone and Methyl Isobuthyl Ketone by Pseudomonas putida KT-3. (Pseudomonas putida KT-3의 Methyl Ethyl Ketone 및 Methyl Isobuthyl Ketone 분해 특성)

  • 김민주;이태호;이경미;류희욱;조경숙
    • Microbiology and Biotechnology Letters
    • /
    • v.30 no.4
    • /
    • pp.395-401
    • /
    • 2002
  • Methyl ethyl ketone (MEK) and methyl isobutyl ketone (MIBK) have been widely used as solvents in various industries. Biodegradation of MEK and MIBK by Pseudomonas putida KT-3, which could utilize MEK or MIBK as a sole carbon source, was characterized, and the cosubstrate interaction in MEK/MIBK mixture was also studied. Within the range of initial MEK concentration (from 0.5 to 5.5 mM), an increased substrate concentration increased the specific degradation rate of MEK by P putida KT-3 (from 3.15 to 10.58 mmol/g DCW$\cdot$h), but the rate sightly increased at 11.0 mM of initial MEK concentation (11.28 mmol/g DCW$\cdot$h). The similar degradation rates of MIBK (4.69-4.92 mmol/g DCW$\cdot$h) were obtained at more than 3.0 mM of initial MIBK concentation. Kinetic analysis on the degradation of MEK/MIBK mixture by P. putida KT-3 showed that MEK or MIBK acted as a competitive inhibitor. Maximum degradation rate ($V_{max}$), saturation constant ($K_{m}$) and inhibition constant ($K_{1}$) were as follows: $V_{max,MEK}$=12.94 mmol/g DCW$\cdot$h; $K_{m,MEK}$=1.72 mmol/L; $K_{l,MEK}$=1.30 mmol/L; $V_{max,MIBK}$=5.00 mmol/g-DCW$\cdot$h; $K_{m,MIBK}$=0.42 mmol/L; $K_{l,MEK}$=0.77 mmol/L.

Characteristics and Survival of Genus Vibrio Isolated in the Intertidal Zone of the Yellow Sea near Kunsan (군산인근해역에서 분리동정된 Vibrio 속의 특성과 해수에서의 생존)

  • 왕혜영;이건형
    • Korean Journal of Environmental Biology
    • /
    • v.17 no.4
    • /
    • pp.439-448
    • /
    • 1999
  • To investigate the population dynamics and survival of Genus Vibrio, population densities of aerobic saprophytic bacteria and Vibrio groups were measured 4 times in the intertidal waters of the Yellow Sea near Kunsan from November, 1997 to June, 1998. The distribution of heterotrophic bacteria during the survey periods by plate count and direct count method ranged from 1.2$\pm$0.6$\times$10$^3$~2.0$\pm$1.5$\times$10$^4$CFU ml­$^1$and from 6.0$\pm$4.0$\times$10$^{5}$ ~1.9$\pm$1.5$\times$10$^{7}$ cells ml­$^1$, respectively. Vibrio groups were distributed in the range of 1$\times$10 and 6$\pm$2.2$\times$10$^2$CFU ml­$^1$. The proportion of Vibrio groups to total heterotrophic bacteria was between 0.1 and 6% during the survey periods. A total of 51 isolates was obtained from TCBS agar plates and identified to species level by Biolog Identification System$^{TM}$. As a result, dominant genera were V, mediterranei, V aitguillarum, tr metschnikovii, and V. parahaemolyticus, and isolates were clustered into 26 groups based on the relatedness of average linkage clustering method at 70% level. As for the susceptibility of 51 isolates to 7 kinds of antibacterial agents (gentamicin, ampicillin, chlorarnphenicol, streptomycin, kanamycin, tetracycline, carbenicillin), 96% of isolates showed high resistance to more than one antibiotics and 65% of isolates contained a plasmid, of which size was observed greater than 12 kb, The number of cells of 3 tested strains (V. anguillarum, V. vulnificus, and V. metschnikovii) in filtered aged seawater decreased by approximately 1 to 5 orders of magnitude during 30-d incubation. In most cases, the numbers of cells decreased rapidly until day 3, then decreased slowly by day 30. The number of cells incubated at 15$^{\circ}C$ showed higher survival than those at 4$^{\circ}C$ and $25^{\circ}C$. These results may be considered for the basic supporting data in the risk assessment of vibriosis in summer.r.

  • PDF

Study for the Homogeneity of Freeway Free-Flow Speed under the State of LOS-A Low Density (LOS A 저밀도 상태에서 고속도로 자유교통류 속도의 동질성에 관한 연구)

  • Yoon, Byoung Jo;Oh, Seung Hwoon
    • KSCE Journal of Civil and Environmental Engineering Research
    • /
    • v.31 no.6D
    • /
    • pp.779-784
    • /
    • 2011
  • Freeway FFS (Free-Flow Speed) under the state of LOS (Level of Service) A has been regarded as a homogeneous state to all levels of traffic volume. The features of low-density FFS is served as the basic data for a decision on limited maximal speed, accident analysis, simulation modeling etc. A few researches for the macroscopic characteristics of design and operation speed have been reported, and any study for the microscopic features of freeway free-flow speed under the state of low density has not been done. Therefore, the characteristics of low-density FFS according to the level of traffic volume (1-3 veh/30 sec) and daily hour periods (0-5, 6-8, 9-11, 12-19, 20-23) is microscopically analyzed in this study with huge volume and speed data. It was found that speed distributions are changed and show different behaviors under the conditions of traffic volume levels and daily time periods. V85s (85th percentile speed) at early morning and night periods decrease when levels of traffic volume increase, whereas V85s at day time do not show considerable differences. Especially, FFSs of levels of traffic volume at early morning and night periods, despite low density, is analyzed as heterogeneity, but homogeneity at day time.

Effect of V and Sb on the Corrosion Behavior and Precipitate Characteristics of Zr-based Alloys for Nuclear Fuel Cladding (핵연료 피복관용 Zr합금의 부식거동 및 석출물 특성에 미치는 V, Sb 첨가의 영향)

  • Jeon, Chi-Jung;Kim, Seon-Jin;Jeong, Yong-Hwan
    • Korean Journal of Materials Research
    • /
    • v.8 no.12
    • /
    • pp.1099-1109
    • /
    • 1998
  • To investigate the effect of V and Sb on the corrosion behavior of Zr- based alloys, corrosion tests were performed on 6 kinds of Zr alloys in an autoclave at $360^{\circ}C$ for 100 days. The transition of the corrosion rate occurred in the sample containing 0.1wt.%V after 10 days but did not occur in the samples containing 0.2wt.%V and 0.4wt.%V. The corrosion resistance of V containing alloys increased with increasing V contents from 0.1 to 0.4wt.% and the alloys containing 0.4wt.%V showed the best corrosion resistance. In the ternary alloys containing 0.1wt.%Sb and 0.4wt.%Sb, the corrosion rate increased significantly from the short exposure time. It was observed that the optimal Sb content for corrosion resistance was 0.2wt.%. The size and volume fraction of precipitates increased with increasing V and Sb contents. The superior corrosion resistance was observed in the Zr alloy having precipitate size of 0.11-0.13$\mu\textrm{m}$. From the result of corrosion behavior and the obserbation of precipitates, the optimal size of the precipitate appear to control the electron conduction in the cathodic reaction and play an important role in maintaining a stable oxide microstructure.

  • PDF

Tracer Study Using $H_2O^{18}$ on the Oxidation of Vanadium (III) by Molecular Oxygen (산소에 의한 바나듐 (III) 이온의 산화반응에 대한 $O^{18}$ 동위원소 연구)

  • Kim, Myeong Ja;Choe, Dong Sik
    • Journal of the Korean Chemical Society
    • /
    • v.18 no.4
    • /
    • pp.259-266
    • /
    • 1974
  • Isotopic experiments using $H_2O^{18}$ on the oxidation of V(III) in acid perchlorate by molecular oxygen were performed in the range pH 1.0 to 3.0. At pH < 2, where a rate equation of the form TEX>$ -\frac{d[V(III)]}{dt}=k_1\frac{[O_2][V(III)]}{[H^+]}$ is adequate, the tracer study clearly indicated that all the product vanadyl ion's ($VO^{2+}$) oxygen originated from the molecular oxygen. At pH > ~2, where a different rate expression of the form $-\frac{d[V(III)]}{dt}=K_2\frac{[O_2][V(III)]^2}{[Ht]^2}$is required, the isotopic experiment showed that half the vanadyl oxygen originated from the molecular oxygen. Considering the results of the isotopic study, a mechanism for the V(Ⅲ)-O2 reaction at pH < ~2, may be suggested as follows: The tracer results at pH > ~2 imply that the rate determining step may be $$ V_2(OH)_2^{4+} + O_2 \rightarrow 2VO^{2+} + H_2O_2$$ followed by $$V_2(OH)_2^{4+} + H_2O_2 \rightarrow 2VO^{2+} + 2H_2O$$ after establishing the equilibria V^{3+} + H_2O \leftrightarrow VOH^{2+} + H^+, and 2VOH^{2+}\leftrightarrow V_2(OH)_2^{4+}$$

  • PDF