• Journal of Environmental Health Sciences
• /
• v.26 no.2
• /
• pp.49-58
• /
• 2000

The present study was performed to investigate photodegradation rate constants and degradation products of phosphamidon and profenofos by the USEPA method. The two pesticides were very stable in 16 days exposure of sunlight from September 3 to 22, 1999 and humic acid had no sensitizing effect on the photolysis of each pesticide in sunlight. In the UV irradiation test, phosphamidon was rapidly degraded as increasing UV intensity. In case of UV irradiation with TiO2 and with TiO2 powder amount, degradation of profenofos showed no significant difference with UV irradiation. Photodegradation rate of profenofos was slower than that of phosphamidon. In order to identify photolysis products, the extracts of degradation products were analyzed by GC/MS. The mass spectra of photolysis products of phosphamidon were at m/z 153 and 149, those of the profenofos were at m/z 208 and 240, respectively. It was suggested that the photolysis products of phosphamidon were 0, 0-dimethyl phosphate(DMP) and N, N-diethylchloroacetamide, those of profenofos were 4-bromo-2-chlorophenol and 0-ethyl-S-propyl phosphate.

• Textile Coloration and Finishing
• /
• v.16 no.1
• /
• pp.10-17
• /
• 2004

Wool fabrics were treated with deep UV for 10 to 30min and then dyed with C.I. Acid Yellow 99, C.I, Acid Red 57 and C.I. Acid Blue 62. FT-IR and XPS have been used to prove the chemical composition of wool fiber surfaces. The mechanical property and colorfastness were also studied. The intencities of the peaks of C=O group at $1700^cm^{-1}$ were increased with increasing irradiation time. Relative $O_{1s},\; N_{1s}\; and\; S_{2p}$ intensities increased considerably and oxygen was incorporated in the form of CO and COO on the fiber surface. The dye uptakes of wool fabrics dyed with three acid dyes were proportional to irradiation times and in inversely proportional to irradiation distances. It was found that the tensile strength of wool fabrics were gradually deteriorated with the UV irradiation times. The colorfastness, such as washing, light and rubbing, of UV irradiated wool fabrics dyed with acid dyes were good.

• Journal of Korean Society for Atmospheric Environment
• /
• v.25 no.3
• /
• pp.211-218
• /
• 2009

Feasibility study of using $Ti0_2$ mist generated by ultrasonic atomization for photocatalytic degradation of gaseous toluene was attempted in this study. For this, the photocatalytic reactor consisting of mist generator and photo-reactor was designed. Most of experimental results showed that steady state reached about 30 minutes after the start of experiments. The effects of $Ti0_2$ concentration, toluene concentration, and UV wavelength on toluene removal ratio were investigated. It was found that the highest removal efficiency was obtained when $Ti0_2$ concentration was 0.6 g/L in slurry. At this condition, it was found that the toluene removal efficiency increased as toluene concentration in feed decreased. In order to investigate the effect of UV wavelength, experiments were carried out using three UV lamps with different UV wavelength. The results showed that the highest removal efficiency was achieved when the lamp with the shortest wavelength were employed.

• Elastomers and Composites
• /
• v.52 no.2
• /
• pp.131-135
• /
• 2017

Zinc nitrate hexahydrate [$Zn(NO_3){\cdot}6H_2O$] and sodium hydroxide [NaOH] were used as source reagents in the preparation of ZnO nanoparticles in an aqueous solution containing deionized water and ethanol in a ratio of 2:5 (v/v). ZnO nanoparticles were heated in an electric furnace at $700^{\circ}C$ for 2 h under an atmosphere of inert argon gas. The morphological and structural properties of the nanoparticles were characterized by scanning electron microscopy (SEM) and powder X-ray diffractometry (XRD). UV-vis spectrophotometry was used to analyze the photocatalytic degradation of 3-nitrophenol with ZnO nanoparticles as photocatalyst under ultraviolet irradiation at 254 nm. Evaluation of the kinetic of the photo-catalytic degradation of 3-nitrophenol indicated that the degradation of 3-nitrophenol with ZnO nanoparticles obeyed the pseudo-first order reaction rate model.

• Proceedings of the Korean Vacuum Society Conference
• /
• 2015.08a
• /
• pp.227.1-227.1
• /
• 2015

산업이 발달하면서 다양한 화학물질이 배출되고 이로 인하여 환경이 오염되고 있으며, 특히, 대부분의 유기 화합물은 대기오염에 많은 영향을 주는 물질로 알려져 있다. 최근 유기 화합물을 제거하기 위해서 UV와 가시광에서 반응하는 광촉매 연구가 진행되고 있다. 본 연구에서는 밴드갭에 변화를 주는 doped $TiO_2$와 가시광에서 반응하는 조촉매를 이용하여 광촉매의 특성을 향상시키는 coupled $TiO_2$를 제조하였다. Doped $TiO_2$를 제조하기 위해서 비금속 물질인 질소(nitrogen)을 사용하였고, coupled $TiO_2$는 graphine oxide(GO)를 환원하여 $TiO_2$-RGO 촉매를 제조하였다. N-$TiO_2$와 $TiO_2$-RGO의 광학 특성을 평가하기 위해서 UV/Vis 분광광도계를 사용하였다. Methylene blue(MB)와 methyl orange(MO)가 분해되는 반응을 통해서 N-$TiO_2$와 $TiO_2$-RGO의 광촉매 특성을 평가하였다. 또한, MB와 MO 분해 테스트에 395 nm long pass filter를 이용하여 가시광에서의 광촉매 활성을 평가하였다.

• 한국신재생에너지학회:학술대회논문집
• /
• 2009.11a
• /
• pp.382-382
• /
• 2009

염료감응형 태양전지의 구성체 중 전극으로 연구 되어 지고 있는 $TiO_2$는 기존에 대량 생산이 가능한 spin coating법, screen printing법, spray법의 연구가 이루어져 왔으나 고 효율 태양전지에 쓰이는 전극 시스템에 비해 고 분산성을 지닌 $TiO_2$페이스트를 제조 하는데 어려움이 있다. 그리고 플렉시블 디스플레이 소자의 응용을 위해서는 소자 공정 온도인 $250^{\circ}C$ 이하의 공정 온도가 요구 되어 지므로 고온공정인 CVD법은 이에 적합하지 않다. 이에 본 연구는 진공 증착 방법인 광원자층증착법을 이용하여 $150^{\circ}C$이하의 저온공정온도에서도 적용이 가능한 $TiO_2$ 박막을 185nm의 UV light를 조사하여 glass 기판위에 제조 하고 그에 따른 박막의 물성 분석을 하였다. Mo source로는 titanium tetraisopropoxide(TTIP)와 reactant gas 로는 $H_2O$를 사용하였으며 불활성 기체인 Ar 가스는 purge 가스로 각각 사용하였다. $100^{\circ}C{\sim}250^{\circ}C$ 공정온도를 변수로 $TiO_2$ 박막을 제조 하였으며 제조된 $TiO_2$ 박막의 물성 분석을 위해 FESEM, TEM을 이용하여 표면 및 두께를 분석하였다. 또한 $100^{\circ}C$ 400 cycles에서 약 12nm 막 두께를 관찰 할 수 있었으며 그 결과 박막의 성장률이 $0.3{\AA}$/cycle 임을 확인 할 수 있었다. 그리고 UV-VIS을 이용하여 박막의 좌외선에 대한 흡수도 및 투과도 분석을 하였다. 또한 XPS 성분 분석을 통하여 $100^{\circ}C$의 저온 공정에서 형성된 박막이 $TiO_2$임을 확인 하였다. 이러한 결과에서 185nm의 UV light에 의한 광원자층 증착법으로 $100^{\circ}C$의 저온에서도 $TiO_2$ 박막이 증착 되는 것을 확인 할 수 있었다.

• Korean Journal of Materials Research
• /
• v.19 no.9
• /
• pp.481-487
• /
• 2009

The photocatalysts of Fe-ACF/$TiO_2$ compositeswere prepared by the sol-gel method and characterized by BET, XRD, SEM, and EDX. It showed that the BET surface area was related to adsorption capacity for each composite. The SEM results showed that ferric compound and titanium dioxide were distributed on the surfaces of ACF. The XRD results showed that Fe-ACF/$TiO_2$ composite only contained an anatase structure with a Fe mediated compound. EDX results showed the presence of C, O, and Ti with Fe peaks in Fe-ACF/$TiO_2$ composites. From the photocataytic degradation effect, $TiO_2$ on activated carbon fiber surface modified with Fe (Fe-ACF/$TiO_2$) could work in the photo-Fenton process. It was revealed that the photo-Fenton reaction gives considerable photocatalytic ability for the decomposition of methylene blue (MB) compared to non-treated ACF/$TiO_2$, and the photo-Fenton reaction was improved by the addition of $H_2O_2$. It was proved that the decomposition of MB under UV (365 nm) irradiation in the presence of $H_2O_2$ predominantly accelerated the oxidation of $Fe^{2+}$ to $Fe^{3+}$ and produced a high concentration of OH radicals.

• Proceedings of the Korean Society of Precision Engineering Conference
• /
• 2012.05a
• /
• pp.789-790
• /
• 2012

• KSBB Journal
• /
• v.23 no.1
• /
• pp.83-89
• /
• 2008

Food wastewater derived from the three-stage methane fermentation system developed in this lab contained high concentration organic substances. The organic wastewater should be treated through advanced wastewater treatment system to satisfy the "Permissible Pollutant Discharge Standard of Korea". In order to treat the organic wastewater efficiently, several optimum operation conditions of a modified $UV/TiO_{2}$ photocatalytic system have been investigated. In the first process, wastewater was pre-treated with $FeCl_{3}$. The optimum pH and coagulant concentration were 4.0 and 2000mg/L, respectively. Through this process, 52.6% of CODcr was removed. The second process was $UV-TiO_{2}$ photocatalytic reaction. The optimum operation conditions for the system were as follows: UV lamp wavelength, 254 nm; wastewater temperature, $40^{\circ}C$; pH 8.0; and air flow rate, 40L/min, respectively. Through the above two combined processes, 69.7% of T-N and 70.9% of CODcr contained in the wastewater were removed.

• Journal of Korean Society for Atmospheric Environment
• /
• v.17 no.4
• /
• pp.363-370
• /
• 2001

In this study, TiO$_2$, the popular photocatalyst, was used to decompose ethanol. TiO$_2$was prepared by the sol -gel method and coated on pyrex stick. A 15W, UV-A lamp was used as the UV light source and il gas chromatography (HP 5890) was used to confirm the concentrations of ethanol, $CO_2$and the intermediates. Variation of preparation parameters and calcination temperature for TiO$_2$photocatalysts in the sol -gel method caused changes of ethanol decomposition activity. The best ethanol photodecomposition activity was obtained on the sample when prepared with 0.14 mol of HCI, a mol of ethanol and 1.3 mol of TTIP ware mixed in sol-gel process and calcinated at 50$0^{\circ}C$ for 3 hours. Acetaldehyde was detected as an intermediate and decomposed to carbon dioxide and water at the end of the reaction.