• Korean Journal of Materials Research
• /
• v.4 no.2
• /
• pp.194-205
• /
• 1994

In this research, we attempt to fabricate an excellent CFRC(Carbon Fiber Reinforced Carbon), which has good thermal and mechanical properties, with 8H/satin woven fabric prepreg, high modulus and high strength type continuous carbon fiber and raw coal tar pitch(RCTP) matrix or THF soluble fraction(THFSP) matrix which has good graphitizability. Green bodies were fabricated with hot press molding technique and CFRC samples were made after carbonization, impregnation, recarbonization and graphitization steps. For the purpose of characterization of the physical properties, SEM, polarized light microscope, TGA were observed, and tested flexural strength, modulus and ILSS. After heat treating the THFSP matrix up to $2300^{\circ}C$, the value of $C_0$/2 was 3.380$\AA$, which is analogous to the structure of natural graphite and the value of 2$\theta$ is $26.276^{\circ}$ approached to the Bragg's angle of natural graphite. As a result of TGA to test the high temperature air oxidation, the THFSP matrix, graphitized up to $2300^{\circ}C$, exhibited the best air oxidation resistance. And mechanical properties were increased up to 65~70% as fiber volume fraction increased. Because of the good orientation graphitizability, the fracture surface of THFSP matrix CFRC is very good.

• Korean Journal of Materials Research
• /
• v.13 no.6
• /
• pp.347-351
• /
• 2003

II-Ⅵ ZnO compound semiconductor thin films were grown on $\alpha$-Al$_2$O$_3$(0001) single crystal substrate by radical beam assisted molecular beam epitaxy and the optical properties were investigated. Zn(6N) was evaporated using Knudsen cell and O radical was assisted at the partial pressure of 1$\times$10$^{4}$ Torr and radical beam source of 250-450 W RF power. In $\theta$-2$\theta$ x-ray diffraction analysis, ZnO thin film with 500 nm thickness showed only ZnO(0002)and ZnO(0004) peaks is believed to be well grown along c-axis orientation. Photoluminescence (PL) measurement using He-Cd ($\lambda$=325 nm) laser is obtained in the temperature range of 9 K-300 K. At 9 K and 300 K, only near band edge (NBE) is observed and the FWHM's of PL peak of the ZnO deposited at 450 RF power are 45 meV and 145 meV respectively. From no observation of any weak deep level peak even at room temperature PL, the ZnO grains are regarded to contain very low defect density and impurity to cause the deep-level defects. The peak position of free exciton showed slightly red-shift as temperature was increased, and from this result the binding energy of free exciton can be experimentally determined as much as $58\pm$0.5 meV, which is very closed to that of ZnO bulk. By van der Pauw 4-point probe measurement, the grown ZnO is proved to be n-type with the electron concentration($n_{e}$ ) $1.69$\times$10^{18}$$cm^3$, mobility($\mu$) $-12.3\textrm{cm}^2$/Vㆍs, and resistivity($\rho$) 0.30 $\Omega$$\cdot$cm.

• Korean Journal of Animal Reproduction
• /
• v.22 no.2
• /
• pp.171-176
• /
• 1998

This study was carried out to confirm whether the in vivo developmental potential of mouse hatched blastocysts (HBs) can be obtained by vitrification method using the cryoprotectant EFS35. The HBs ($\theta$ 130$\mu\textrm{m}$) were cultured in vitro until day 5 from zygotes produced in vivo and were equilibrated in 10% ethylene glycol(EG) for 5 min, and then were exposed or vitrified in EFS35 (35% EG, 18% Ficoll and 0.3M sucrose). After 30 min thawing, re-expanding HBs were transferred into one or both uterine horns of pseudopregnant recipients on day 3 (4~6 embryos /horn). Pregnancy rates of recipients and implantation were assessed by autopsy on day 15 of gestation. The results obtained in these experiments were summarized as follows : After thaw-ing, in vitro survival of HBs was not significantly different between exposed (65.5%) and vitrified(54.5%) group. Also, when the in vivo development potential was examined, total implantation was not different between control (58.5% ) and vitrified (41.0%) group, although the live fetus formation of vitrified group (24.0%) was significantly lower than that of control (58.3%) group (p< 0.05). These results suggested that vitrification freezing method of mouse HBs using EFS35 can be used to make wide the utility of embryo transfer of the more embryos produced in vitro.

• Journal of Conservation Science
• /
• v.29 no.4
• /
• pp.345-354
• /
• 2013

This study analyses geochemistrical, microscopic, mineralogical characteristics of coals which have been collected from in and out of the shipwreck No 1 of Mado island during underwater excavation in Taean. The result from mineralogical and geochemical analysis reveals that the specific gravity of the coals is $1.28g/cm^3$. Considering that coals contains 10% mineral of it and the specific gravity of the pure is $1.15g/cm^3$, it is believed that the collected coals would be lignite or biturminous coal. The X-ray diffraction analysis which displays the peak of $2{\theta}$ is 20~25C degree, proves that the collected coals would be categorised as low rank coal. The collected coals is composed of: 93%-94%(93.5%) of vitrinite maceral group, 5%-6%(5.5%) of exinite maceral group, and 1% of inertinite maceral group. In addition, the average of reflection rate is $R_{mean}$: 0.627 showing that it would be either high volatile bituminous C coal or sub-bituminous C coal. Such result confirms that the coal is sub-bituminous C or high volatile bituminous C coal in accordance with the U.S Bureau of Mine(USBM) classification system. The element analysis reveals that the coal is the coking coal which is grouped as the bituminous coal. Comparative analysis between the coals of Mado Shipwreck No 1 and domestic coals shows that the coals of Mado Shipwreck is similar to the bituminous coal used in the area of Janggi in Pohang city.

• Science of Emotion and Sensibility
• /
• v.19 no.4
• /
• pp.119-126
• /
• 2016

In this study, we investigated the effects of mouth breathing on brain activity through electroencephalogram (EEG). EEG was performed on 12 healthy volunteers of age ranging from 21 to 27 years (male: female = 6:6, non-smoker). Brain waves on resting state (Rest_N/Rest_M) and auditory-language stimuli state (Eng_N/Eng_M) were recorded during mouth and nose breathing. Four different regions (R1~R4) were classified based on the brain functionality. And each channel (e.g., Pf1 and Pf2) and frequency (${\alpha}$, ${\beta}$, ${\gamma}$, and ${\theta}$) were analyzed using their absolute power ratios of fast Fourier transform (FFT). The results showed that there was no significant difference between Rest_N and Rest_M. Eng_N had significantly higher brain activity than Rest_N; on the other hand, there was no significant difference between Rest_M and Eng_M. These results demonstrate that mouth-breathing on resting state does not induce any significant effects on brain activity and/or functionality, even though it causes subtle temporary inconvenience. In addition to the uncomfort, the brain activity can be adversely influenced by mouth-breathing, which could lower the cognitive skills under certain circumstances.

• Korean Journal of Food Science and Technology
• /
• v.32 no.3
• /
• pp.500-506
• /
• 2000

The effects of sodium stearoyl lactylate(SSL) on the thermal properties of wheat starch and amylopectin, and the crystallinity properties of amylopectin were investigated using differential scanning calorimetry(DSC) and X-ray diffractometer. On the rescan(second heating), amylopectin produced the featureless thermogram shown at the second heating, and SSL alone melted at $40{\sim}55^{\circ}C$, while the mixture of amylopectin containing 8% water and SSL(10:1), presenting the evidence of AP-SSL complex, showed differentiate melting temperature(other crystallinity) from SSL alone. Also, the melting enthalpy of AP and SSL mixture by subsequent heating and cooling were continuously increased. Further, the mixtures of wheat starch: SSL (5:1, w/w) and amylopectin: SSL(5:1, w/w), indicated AP-SSL complex, showed the reversible melting peak at temperature range of $60{\sim}70^{\circ}C$ together with melting peak of SSL observed at temperature range of $40{\sim}55^{\circ}C$. AP-SSL complex in the X-ray diffraction, compared V-form of amylose-lipid complex, exhibited characteristic peaks($2{\theta}$, 5.57, 20.903, 23.227). The gelatinization enthalpy value of wheat starch in the presence of SSL, observed at temperature range of $50{\sim}70^{\circ}C$, was decreased at total water content 60%, whearas had no significant effect at total water content 40, 50%, and also, SSL increased melting enthalpy of amylose-lipid complex. The extent of AP and wheat starch retrogradation wasreduced significantly by SSL.

• Journal of Korean Society of Forest Science
• /
• v.102 no.1
• /
• pp.122-128
• /
• 2013

Genetic diversity and population genetic structure were estimated in nine natural populations of Exochorda serratifolia in South Korea using ISSR marker system. Average of polymorphic loci per primer was 5.8 (S.D.=2.32) and percentage of polymorphic loci per population was 78.7% with total 35 loci from 6 ISSR primers. In AMOVA, 27.8% of total genetic variation came from genetic difference among populations and 72.2% was resulted from difference among individual trees within populations. Genetic differentiations by Bayesian inference were 0.249 of ${\theta}^{11}$ and 0.227 of $G_{ST}$. Inbreeding coefficient for total populations was 0.412. There was significant correlation between genetic distance and geographic distance among populations. On the results of Bayesian cluster analysis, nine populations were assigned into three groups. The first group included 5 populations, and the second and the third had two populations per group, respectively. These three regions could explain 10.0% of total genetic variation from hierarchical AMOVA, and the levels of among-population and among-individual were explained 19.7% and 70.3%, respectively. The geographic distribution of populations following the three Bayesian clusters could be explained with mountain range as Baekdudaegan which is the main chain of mountains in Korea. The mountains as the physical barrier might hamper gene flow in the pearlbush. So when protected areas are designated for conservation of this species, we should consider those three regions into considerations and would better to choose at least one population per region.

• Progress in Medical Physics
• /
• v.12 no.2
• /
• pp.177-184
• /
• 2001

The goal of radiation treatment is to deliver a prescribed radiation dose to the target volume accurately while minimizing dose to normal tissues. Due to inaccurate placement of field and shielding block and patient's movement, there could be displacement errors between the planed and treatment regions. In order to verify the location of radiation treatment, we in this study developed the registration algorithm of the x-ray simulator images and portal images and quantified the inaccuracy in terms of shift, scale and rotation. The algorithm for registration of pairs of radiation fields consists of the alignment of pairs of radiation images by points matching and field displacement analysis by field boundary matching. In the first step, paired surface landmarks are matched to calculate the transformation parameters (scale, rotation and shift) using the corresponding line pairs which are created by connecting two landmarks of each image. In the next step, portal field boundary is extracted and then the two field boundaries are matched by the $\rho$-$\theta$ technique. Applying the phantom portal images, detection errors were calculated to be less than 2mm in translation, 1$^{\circ}$ in rotation and 1% in scale. In conclusion, we quantitatively analyzed the displacement error of x-ray simulator images and portal images. The present results could contribute to the study of the radiation treatment verification.

• The Journal of the Petrological Society of Korea
• /
• v.24 no.3
• /
• pp.153-164
• /
• 2015

Jurassic granite from Geochang was analysed with respect to the characteristics of the rock cleavage. we have mainly discussed the structual anisotropy formed by microcracks. The phases of distribution of microcracks were well evidenced from the enlarged photomicrographs(${\times}6.7$) of the thin section. The planes of principal set of microcracks are parallel to the rift plane and those of secondary set are parallel to the grain plane. These rift and grain microcracks are mutually near-perpendicular on the hardway planes. From the directional angle(${\theta}$) - total length($L_t$), number(N) and density(${\rho}$) chart, the curve patterns of the above microcrack parameters reflect the phases of distribution of microcracks. Microcrack parameters such as number, length and density show an order of rift > grain > hardway. These results indicate a relative magnitude of the rock cleavage. Meanwhile, brazilian tensile strengths were measured with respect to the six directions. The results revealed a strong correlation between mechanical property with the above microcrack parameters. These general results correspond to those of the previous study for Jurassic granites from Pocheon and Hapcheon. Image processing technique for the enlarged photomicrograph of the thin section was carried out. The grain 1(G1) microcrack arrays developed in quartz and feldspar grains show excellent distribution on the photomicrograph. In particular, the directional angle of each microcrack set can be ascertained easily by brief image processing for the above photomicrograph.

• Elastomers and Composites
• /
• v.44 no.4
• /
• pp.447-454
• /
• 2009

We synthesized polyester-diol containing Cloisite 30B which is exfoliated during the synthesis. First, esterification was conducted with excess adipic acids and two 2-hydroxyethyl groups of the tertiary ammonium tethered to Cloisite 30B silicate layer. Due to the small molecular size of adipic acid ($d{\approx}3.0\;{\AA}$, $L{\approx}9.3\;{\AA}$), it penetrated into the interlayer of Cloisite 30B, reacted with the 2-hydroxyethyl groups, and produced the tertiary ammonium that has the two ethyl-ester adipic acid groups, one methyl group, and one hydrogenated alkyl group. Through the esterification, the molecular size of the tertiary ammonium increased and as the result, the basal space of Cloisite 30B increased from $18.4\;{\AA}$ to more than $58.3\;{\AA}$. The produced ethyl-ester adipic acid and unreacted adipic acid reacted with excess diethylene glycol ([COOH]/[OH]${\approx}0.6$) to be polyester-diol. The COOH conversion calculated from the acid value of the reactant mixture was 94%. The number average molecular weight and PDI of the produced polyester-diol were 830 g/mol and 1.2, respectively.