• Proceedings of the Korean Institute of Electrical and Electronic Material Engineers Conference
• /
• 2007.06a
• /
• pp.199-199
• /
• 2007

Bi-Te계 화합물은 상온영역 ($250^{\circ}C$ 이하)에서 열전 특성이 우수하여, 냉각용 및 발전용 열전 소자 재료로 사용되고 있다. 앞선 연구에서 La이 치환된 Bi-Te 진공가압 소결체의 열전특성이 $Bi_2Te_3$와 비교하여 향상된 값을 나타내었다. 본 연구에서는 Bi와 Te을 각각 0.01wt% Ce으로 미량 치환하여 기계적 합금화법으로 제조한 분말을 $420^{\circ}C$, 200MPa로 진공가압 소결하였다. 진공가압 소결체의 열전특성은 Seebeck계수, 전기전도도. 열전도도를 측정하여 성능지수를 계산하였고 Bi-Te, (Bi-Ce)-Te, Bi-(Te-Ce)의 열전특성을 비교 분석하였다.

• 한국초전도학회:학술대회논문집
• /
• v.9
• /
• pp.75-82
• /
• 1999

TE$_{01\;{\delta}}$ mode Cavity Resonators with a low loss dielectric rod and YBa$_2Cu_3O_{7-{\delta}}$ (YBCO) endplates were prepared and their microwave properties were studied at temperatures above 30 K. Both sapphire and rutile were used as the dielectrics. The TE$_{01\;{\delta}}$ mode Q$_0$ of the resonator, designed to work as a tunable resonator with variations in the gap distance (s) between the dielectric rod and the top YBCO, was more than 1000000 at s = 0 mm and at 30 K and .the resonant frequency of 19.56GHz when a sapphire rod was used for the dielectric. The TE$_2Cu_3O_{7-{\delta}}$ mode resonant frequency (f$_0$) appeared to decrease as the temperature is raised. Meanwhile, the temperature dependence of the TE$_2Cu_3O_{7-{\delta}}$ mode f$_0$ of the rutile-loaded resonator appeared different with f$_0$ increasing according to the temperature and Q$_0$ more than 300000 at 30 K and f$_0$ = 8.56 CHz. Comparisons were made between the microwave properties of the sapphire-loaded and the rutile-loaded resonators. Also, applications of the TE$_2Cu_3O_{7-{\delta}}$ mode cavity resonator for a tunable resonator with a very high Q$_0$ as · well as a characterization tool for surface resistance measurements of HTS films are described.

• Proceedings of the Korean Vacuum Society Conference
• /
• 2015.08a
• /
• pp.253-253
• /
• 2015

최근 세계적으로 대체 에너지는 중요한 이슈가 되고 있으며 특히 열전 재료는 유망한 에너지 기술로서 주목 받고 있다. 특히 고 직접화 전자 소자의 발열 문제를 해결하기 위해, 소형화와 정밀 온도 제어가 가능한 박막형 열전 소자에 대한 관심이 크다. 박막형 열전소자 중 산화물 반도체계에 대한 연구가 활발히 진행되고 있으며, 이러한 산화물 반도체계 중 In2O3는 BiTe, PbTe 등의 기존의 재료에 비해 독성이 낮을 뿐만 아니라 고온에서 열적 안정성이 우수하여 고온에서 적용 불가능한 금속계 열전 재료의 한계를 극복할 수 있다는 장점을 가진다. 좋은 성능의 열전 재료는 높은 전기 전도도 및 제백 계수 그리고 낮은 열전도도 특성을 가져야 한다. 비정질 구조를 가지는 박막 열전 재료는 격자에 의한 열 전도도가 낮기 때문에 결정질 구조와 비교하여 전체 열 전도도 값이 낮을 것으로 기대된다. 이러한 특성을 바탕으로 본 연구에서는 비정질 구조를 갖는 ZnO와 SnO2를 동시에 첨가한 In2O3 박막의 전기적 특성과 열전 특성에 관한 연구를 하였다.

• Proceedings of the KIEE Conference
• /
• 2004.07e
• /
• pp.134-136
• /
• 2004

The results of investigations of $Ag_2Te$ crystal is presented. $Ag_2Te$ crystal was grown by the Bridgman method. The $Ag_2Te$ crystal was an monoclinic structure with lattice constance a = 8.1686 A, b = 9.0425 ${{\AA}}$, c = 8.0065 ${{\AA}}$. Hall effect shows a n-type conductivity in the $Ag_2Te$ crystal. The electrical resistivity values was $1.080e^{-3}{\Omega}cm$ and electron mobility was $-5.48{\times}10^3cm^2/V{\cdot}sec$ at room temperature(RT).

• Korean Journal of Materials Research
• /
• v.5 no.2
• /
• pp.223-231
• /
• 1995

Mechanical alloying behavior of the PbTe intermetallic compound, which is used for thermoelectric generation, has been investigated with milling time and ball-to-powder weight ratio. Formation of PbTe alloy was completed by mechanical alloying of the as-mixed Pb and Te powders for 2 minutes at ball-to-powder weight ratio of 2 : 1. In situ measurement of the abrupt temperature rise during the ball milling process indicated that the PbTe intermetallic compound was formed by a self-sustained reaction rather than diffusional reactions. Lattice constant of PbTe alloy fabricated by mechanical alloying, 0. 6462nm, was not varied with milling time and ball-to-powder weight ratio. This value of the lattice parameter is in excellent agreement with 0.6459nm, which was reported for PbTe powders processed by melting and grinding.

• Proceedings of the KIEE Conference
• /
• 2003.07c
• /
• pp.1407-1409
• /
• 2003

The results of investigations of $Ag_2Te$ crystal is presented. $Ag_2Te$ crystal was grown by the Bridgman method. The $Ag_2Te$ crystal was an monoclinic structure with lattice constance a = 8.1686, b=9.0425, c=8.0065. Hall effect shows a n-type conductivity in the $Ag_2Te$ crystal. The electrical resistivity values was $1.080e^{-3}cm$ and electron mobility was $-5.4810^{3}cm^{2}$/Vsec at room temperature(RT).

• Proceedings of the Materials Research Society of Korea Conference
• /
• 2007.11a
• /
• pp.74.1-74.1
• /
• 2007

• Journal of the Korean Institute of Electrical and Electronic Material Engineers
• /
• v.30 no.3
• /
• pp.185-191
• /
• 2017

Cadmium compounds with one dimension (1D) nanostructures have attracted attention for their excellent electrical and optical properties. In this study, vertically aligned CdTe-Si nanostructures with high density were synthesized by several simple chemical reactions. First, l D Te nanostructures were synthesized by silver assisted chemical Si wafer etching followed by a galvanic displacement reaction of the etched Si nanowires. Nanowire length was controlled from 1 to $25{\mu}m$ by adjusting etching time. The Si nanowire galvanic displacement reaction in $HTeO_2{^+}$ electrolyte created hybrid 1D Te-branched Si nanostructures. The sequential topochemical reaction resulted in $Ag_2Te-Si$ nanostructures, and the cation exchange reaction with the hybrid 1D Te-branched Si nanostructures resulted in CdTe-Si nanostructures. Wet chemical processes including metal assisted etching, galvanic displacement, topochemical and cation exchange reactions are proposed as simple routes to fabricate large scale, vertically aligned CdTe-Si hybrid nanostructures with high density.

• Electrical & Electronic Materials
• /
• v.8 no.5
• /
• pp.619-625
• /
• 1995

Polycrystalline CdTe thin film has been studied for photovoltaic application due to the 1.45 eV band gap energy ideal for solar energy conversion and high absorption coefficient. The formation of low resistance contact to p-CdTe is difficult because of large work function(>5.5eV). Common methods for ohmic contact to p-CdTe are to form a p+ region under the contact by in-diffusion of contact material to reduce the barrier height and modify a p-CdTe surface layer using chemical treatment. In this study, the surface chemical treatment of p CdTe was carried out by H$\_$3/PO$\_$4/+HNO$\_$3/ or K$\_$2/Cr$\_$2/O$\_$7/+H$\_$2/SO$\_$4/ solution to provide a Te-rich surface. And various thin film contact materials such as Cu, Au, and Cu/Au were deposited by E-beam evaporation to form ohmic contact to p-CdTe. After the metallization, post annealing was performed by oven heat treatment at 150.deg. C or by RTA(Rapid Thermal Annealing) at 250-350.deg. C. Surface chemical treatments of p-CdTe thin film improved metal/p-CdTe interface properties and post heat treatment resulted in low contact resistivity to p-CdTe.Of the various contact metal, Cu/Au and Cu show low contact resistance after oven and RTA post-heat treatments, respectively.

• Korean Journal of Crystallography
• /
• v.6 no.2
• /
• pp.141-157
• /
• 1995

Single crystals of TeO2 with large diameter were grown by Czochralski technique with auto-diameter control system. The ratio of crystal to crucible was 60-70%. The effect of critical pulling and rotation rate on the crystal quality was studied. Optimum growth parameters for high quality crystal pulling rate was less than 1.2 mm/hr. The solid-liquid interface was convex at the rotation rate of 10-23 rpm and concave at the rotation rate of more than 25 rpm, depending on the size of crystal and crucible. The platinum concentration in the melts is one of the main factors of the constitutional supercooling and thus the bubble entrapment in the growing crystal. Growth axis was confirmed to {110} direction during the whole growth procedure. Infrared spectrometric study and dislocation density measurment by chemical etching method on the grown crystal were performed. Finally, the reasons of cooperation of striations, inclusions, and optical inhomogeneities were discussed.