• Korean Journal of Materials Research
• /
• v.11 no.12
• /
• pp.1080-1085
• /
• 2001

Dielectric properties and leakage current characteristics of 100 nm-thick $Ta_2O_5/Al_2O_3$multilayer thin films, which were fabricated by reactive sputtering of$Al_2O_3$and$Ta_2O_5$ successively on top of each other for total 9 layers, have been investigated with variation of the$Al_2O_3$content$(i.e,\;Ta_2O_5/Al_2O_3 \;thickness\;ratio)$.$Ta_2O_5/Al_2O_3$films were amorphous regardless of the$Al_2O_3$content. With increasing the$Al_2O_3$content from 0% to 100%, refractive index of the $Ta_2O_5/Al_2O_3$films decreased linearly from 2.03 to 1.56 and dielectric constant was lowered from 23.9 to 7.7 Variation of the dielectric constant with the$Al_2O_3$content was in good agreement with the behavior that was obtained by assuming parallel capacitors of$Al_2O_3$and Ta_2O_5$. Leakage current characteristics of $Ta_2O_5/Al_2O_3$ multilayer films were superior to those of $Ta_2O_5$ and$Al_2O_3$films. $Ta_2O_5/Al_2O_3$ films of 5% and 10%$Al_2O_3$content exhibited excellent leakage current densities which were lower than $10^{-7} A/cm^2$ at 1MV/cm.

• Journal of the Korean Ceramic Society
• /
• v.34 no.2
• /
• pp.202-208
• /
• 1997

Bi-layered SrBi2Ta2O9(SBT) films were deposited on Pt/Ti/SiO2/Si sibstrates by rf magnetron sputt-ering at room temperature and then were annealed at 75$0^{\circ}C$, 80$0^{\circ}C$ and 85$0^{\circ}C$ for 1 hour in oxygen at-mosphere. The film composition of SrBi2Ta2O9 was obtained after depositing at room temperature and annealing at 80$0^{\circ}C$. Excess 20mole% Bi2O3 and 30 mole% SrCO3 were added to the target to compensate for the lack of Bi and Sr in SBT film. 200 nm thick SBT film exhibited and dense microstructure, adielectric constant of 210, and a dissipation factor of 0.05 at 1 MHz frequency. The films exhibited Curie temperature of 32$0^{\circ}C$ and a dielectric constant of 314 at that temperature under 100 kHz frequency. The remanent polarization(2Pr) and the coercive field(2Ec) of the SBT films were 9.1 $\mu$C/$\textrm{cm}^2$ and 85 kV/cm at an applied voltage of 3V, resspectively and the SBT film showed a fatigue-free characteristics up to 1010 cy-cles under 5V bipolar pulse. The leakage current density of the SBT film was about 7$\times$10-7A/$\textrm{cm}^2$ at 150 kV/cm. Fatigue-free SBT films prepared by rf magnetron sputtering can be suitable for application to non-volatile memory device.

• Korean Journal of Materials Research
• /
• v.4 no.5
• /
• pp.550-555
• /
• 1994

The effects of RTA treatment on the leakage current have been studied for tantalum pentoxide( $Ta_2O_5$) films deposited by PECVD on P-type(100) Si substrate using $TaCl_5$(99.99%) and $N_2O$(99.99%) gaseous mixture. The refractive index increased with increasing the deposition temperature and the maximum deposition rate was obtained at $500^{\circ}C$. The Ta-0 bond peak intensity of as-deposited $Ta_2O_5$ increased with increasing the deposition temperature through FT-IR analysis and the leakage current value was decreased with increasing the deposition temperature. The small leakage current value obtained after RTA treatment of as-deposited $Ta_2O_5$ was found to be due to the reduction of 0-deficient structure in the film. The increases of the oxygen coacentration and the Ta-0 bond peak intensity in the film after RTA treatment were measured by AES and FT-IR analyses.

• Proceedings of the Materials Research Society of Korea Conference
• /
• 2003.03a
• /
• pp.87-87
• /
• 2003

• Proceedings of the Materials Research Society of Korea Conference
• /
• 1992.05b
• /
• pp.140-141
• /
• 1992

• Proceedings of the Materials Research Society of Korea Conference
• /
• 2009.05a
• /
• pp.22.1-22.1
• /
• 2009

차세대 CMOS 공정에서 유전상수가 높은 게이트 절연막과 함께 게이트 전극이 관심을 끌고 있다. 게이트 전극은 전도도가 높아야 하고 p-MOS, n-MOS에 맞는 일함수를 가져야 하며 열적 특성이 안정해야 한다. 탄탈룸 계열 탄화물이나 질화물은 게이트 전극으로 관심을 끌고 있는 물질이며 이를 원자층 화학증착법으로 박막화 하는 공정이 관심을 끌고 있다. 원자층 화학공정에서는 전구체의 역할이 중요하며 이의 기상반응 메카니즘, 표면 반응 메카니즘을 제대로 이해해야 한다. 본 연구에서는 TBTDET (tert-butylimido tris-diethylamido tantalum) 전구체의 반응 메커니즘을 FTIR(Fourier Transform Infrared)을 이용해 진단하였다. 또한 수소, 암모니아, 메탄을 이용한 열화학 원자층 증착, 플라즈마 원자층 증착 공정을 수행하여 박막을 얻고 이들의 특성을 평가하였다. 각 공정에 따라 반응 메커니즘이 달라지고 박막의 조성이 달라지며 또한 박막의 물성도 달라진다. 특히 박막에 형성되는 TaC, TaN, Ta3N5, Ta2O5 (증착 후 산소의 유입에 의해 형성됨) 등의 조성이 공정에 따라 달라지며 박막의 물성도 달라진다. 반응메카니즘의 연구를 통해 각 공정에서 어떠한 조성의 박막이 얻어지는 지를 규명하였고 박막의 밀도에 따라 산소유입량이 어떻게 달라지는 지를 규명하였다.

• Proceedings of the Materials Research Society of Korea Conference
• /
• 1993.05a
• /
• pp.69-69
• /
• 1993

• Journal of the Korean Institute of Telematics and Electronics A
• /
• v.30A no.8
• /
• pp.34-41
• /
• 1993

Effect of high temperature annealing conditions on Ta$_{2}O_{5}$ thin films was investigated. Ta$_{2}O_{5}$ thin films were deposited on P-type silicon substrates by plasma-enhanced chemical vapor deposition (PECVD) using tantalum ethylate. Ta(C$_{2}H_{5}O)_{5}$, and nitrous oxide. N$_{2}$O. The microstructure changed from amorphous to polycrystalline above 700.deg. C annealing temperature. The refractive index, dielectric onstant and leakage current of the film increased as annealing temperature increased. However, annealing in oxygen ambient reduced leakage currents and dielectric constant due to the formation of interfacial SiO$_{2}$ layer. By optimizing annealing temperature and ambient, leakage current lower than 10$^{-8}$ A/cm$^{2}$ and maximum capacitance of 9 fF/${\mu}m^{2}$ could be obtained.

• Journal of the Korean Vacuum Society
• /
• v.9 no.2
• /
• pp.136-143
• /
• 2000

$SrBi_2Ta_2O_9;(SBT)$ films were deposited on p-type Si(100) at room temperature by rf magnetron sputtering method to confirm the possibility of application of $Pt/SBT/Pt/Ti/SiO_2/Si$ structure (MFM) for destructive read out ferroelectric RAM (random access memory). Their structural characteristics with the various annealing times and Ar/$O_2$ gas flow ratios in sputtering were observed by XRD (X-ray diffractometer) and the surface morphologies were observed by FE-SEM (field emission scanning electron microscopy), and their electrical properties were observed by P-V (polarization-voltage measurement) and I-V (current-voltage measurement). The Ar/$O_2$ gas flow ratios of sputtering gas were changed from 1 : 4 to 4 : 1 and SBT thin films were deposited at room temperature. The films show (105), (110) peaks of SBT by XRD measurement. SBT thin films deposited at room temperature were crystallized by furnace annealing at 80$0^{\circ}C$ in oxygen atmosphere during either one hour or two hours. Among their electrical properties, P-V curves showed shaped hysteresis curves, but the SBT thin films showed the asymmetric ferroelectric properties in P-V curves. When Ar/$O_2$ gas flow ratios are 1 : 1, 2: 1, the leakage current density values of SBT thin films are good, those values of 3 V, 5 V, and 7 V are respectively $3.11\times10^{-8} \textrm{A/cm}^2$, $5\times10^{-8}\textrm{A/cm}^2$, $7\times10^{-8}\textrm{A/cm}^2$.After two hours of annealing time, their electrical properties and crystallization are improved.

• Journal of the Korean Ceramic Society
• /
• v.39 no.4
• /
• pp.377-385
• /
• 2002

The possibility of $ZrO_2$ thin film as insulator for Metal-Ferroelectric-Insulator-Semiconductor(MFIS) structure was investgated. $SrBi_2Ta_2O_9$ and $SrBi_2Ta_2O_9$(SBT) thin films were deposited on P-type Si(111) wafer by R. F. magnetron sputtering method. The electrical properties of MFIS gate were relatively improved by inserting the $ZrO_2$ buffer layer. The window memory increased from 0.5 to 2.2V in the applied gate voltage range of 3-9V when the thickness of SBT film increased from 160 to 220nm with 20nm thick $ZrO_2$. The maximum value of window memory is 2.2V in Pt/SBT(160nm)/$ZrO_2$(20nm)/Si structure with the optimum thickness of $ZrO_2$. These memory windows are sufficient for practical application of NDRO-FRAM operating at low voltage.