• 제목/요약/키워드: $SrCu_2O_2$

검색결과 464건 처리시간 0.049초

Effect of columnar defects on the irreversibility line in pristine and iodine-intercalated Bi$_2$Sr$_2$CaCu$_2$O$_{8+{\delta}} single crystals

  • Kim, Ki-Joon;Kim, Mun-Seog;Choi, Jae-Hyuk;Kang, W.N.;Lee, Sung-Ik;Ha, Dong-Han;Kim, Dong-Ho
    • 한국초전도학회:학술대회논문집
    • /
    • 한국초전도학회 2000년도 High Temperature Superconductivity Vol.X
    • /
    • pp.45-50
    • /
    • 2000
  • We have investigated the influence of columnar defects (CD) on the vortex dynamics in pristine and iodine-intercalated Bi$_2$Sr$_2$CaCu$_2$O$_{8+{\delta}} single crystals from do SQUID magnetization measurements. Especially, the temperature dependence of the irreversibility fields, H$_{irr}$(T), were studied. Anisotropy ratio ${\gamma}$, estimated from the fitting to the 2-dimensional melting model (A. Schilling et al., Phys. Rev. Lett. 71 1899 (1993)) in higher fields than the matching field B$_{\phi}$ at low temperature region, turns out to be decreased by the iodine-intercalation and additionally by the heavy-ion irradiation.

  • PDF

Sr$_2AlTaO_6$ 절연막을 이용한 계면처리된 경사형 모서리 조셉슨 접합의 제작 (Fabrication of the interface-treated ramp-edge Josephson junctions using Sr$_2AlTaO_6$ insulating layers)

  • 최치홍;성건용;한석길;서정대;강광용
    • 한국초전도학회:학술대회논문집
    • /
    • 한국초전도학회 1999년도 High Temperature Superconductivity Vol.IX
    • /
    • pp.63-66
    • /
    • 1999
  • We fabricated ramp-edge Josephson junctions with barriers formed by interface treatments instead of epitaxially grown barrier layers. Low-dielectric Sr$_2AITaO_6$(SAT) layer was used as an ion-milling mask as well as an insulating layer for the ramp-edge junctions. An ion-milled YBa$_2Cu_3O_{7-x}$ (YBCO)-edge surface was not exposed to solvent through all fabrication procedures. The barriers were produced by structural modification at the bottom YBCO edge using plasma treatment prior to deposition of the top YBCO electrode. We investigated the effects of pre-annealing and post-annealing on the characteristics of the interface-treated Josephson junctions. The junction parameters were improved by using in-situ RF plasma cleaning treatment.

  • PDF

Studies on the Macrocycle-mediated Transport of Divalent Metal Ions in a Supported Liquid Membrane System

  • 조문환;신상철
    • Bulletin of the Korean Chemical Society
    • /
    • 제16권1호
    • /
    • pp.33-36
    • /
    • 1995
  • Macrocyclic ligands have been studied as cation carriers in a supported liquid membrane system. Cd2+ has been transported using nitrogen substituted macrocycles as carriers and several divalent metal ions (M2+=Zn, Co, Ni, Cu, Pb, Mg, Ca, and Sr) have been transported using DBN3O2, DBN2O2and PolyNtnoen as carriers in a supported liquid membrane system. Competitive Cd2+-M2+ transport studies have also been carried out with the same system. Ligand structure, stability constant, membrane solvent and carrier concentration are also important parameters in the transport of metal ions.

Metals in Coastal Sediments Adjacent to the Youngkwang Nuclear Power Plant, West Coast of Korea

  • Cho, Yeong-Gil;Yang, Sung-Ryull;Park, kyung-Yang
    • Journal of the korean society of oceanography
    • /
    • 제32권3호
    • /
    • pp.112-119
    • /
    • 1997
  • Coastal sediments collected near the Youngkwang Nuclear Power Plant were analysed for major(Al$_2$O$^_3$, Fe$^_2$O$^_3$, MgO, CaO, Na$^_2$O, K$^_2$O, TiO$^_2$, MnO), trace (Ba, Sr, V, Co, Cr, Cu, Ni, Zn, Pb) metal, and P$^_2$O$^_5$ contents. The composition of bulk metals from most stations fits within the range as those in the average crustal and sedimentary rocks, suggesting that the anthropogenic perturbation of these components is insignificant. The abundance and distribution of total contents for the majority of metals in the surface sediment could be explained by the grain size and were associated with mud (<63 ${\mu}$m) contents. However, distributions of Ca, K, Sr and Ba did not have any significant association with the sediment grain size. This may be due to the geochemical coherence among these metals in certain minerals abundant in coarse grained fractions. The distribution of Pb appears to be partly affected by the contribution from aerosol fallout. Using the R'-mode factor analysis, we show that the variance of the metal contents could be explained by four factors which account for 93.7% of the total variance. It appears that texturally controlled and/or sorting factors influenced by fine fraction are the most dominant factors which determine the relative abundance and distribution of metals in the study area.

  • PDF

BSCCO 초전도 선재의 미세조직 및 임계전류밀도에 미치는 공정변수 효과 (Effect of Processing Variables on Microstructure and Critical Current Density of BSCCO Superconductors Tape)

  • 지봉기;김태우;주진호;김원주;이희균;홍계원
    • 한국전기전자재료학회논문지
    • /
    • 제11권11호
    • /
    • pp.1014-1021
    • /
    • 1998
  • We evaluated the effect of processing variables on microstructural evolution interface irregularity between Ag sheath and superconductor core and resultant critical current density(J$_{c}$) of (Bi,Pb)$_2$Sr$_2$Ca$_2$Cu$_3$O$_{x}$(2223) superconductor tape. The value of J$_{c}$ was significantly influenced by the interface irregularity, degree of texturing and relative 2223 content. The interface became more irregular(sausage effect), while the degree of texturing gradually improved as the dimension of tape decreased during forming process. As the dimension of wire/tape were changed from diameter of 3.25 mm to thickness of 0.20 mm, J$_{c}$ value was observed to be increased by 10 times. In addition, optimum sintering temperature for improved J$_{c}$ was observed to be 835$^{\circ}C$ in a ambient atmosphere probably due to combined effect of both improved texturing and high 2223 content. Microstructural investigation showed the degree of texturing was degraded by the existence of both second phases and interface irregularity. It was observed that larger grain size and better texturing was developed near relatively flat interface compared to those inside superconducting core.ting core.

  • PDF

Pseudogap behavior in interlayer tunneling spectroscopy in $Bi_{2}Sr_{2}CaCu_{2}O_{8+x}$

  • 배명호;최재현;이후종
    • Progress in Superconductivity
    • /
    • 제7권1호
    • /
    • pp.1-5
    • /
    • 2005
  • A pseudogap in the normal-state quasiparticle density of states of $high-T_c$ superconductors has been revealed in many different kinds of experiments. The existence of the pseudogap and the superconducting gap, and the correlation between them has attracted considerable attention because they are believed to be a key to understanding the mechanism of the $high-T_c$ superconductivity. The interlayer tunneling spectroscopy, excluding the surface-dependent effect, is one of the most accurate means to examine the electron spectral characteristics both in the superconducting and the normal states. In this study, a new constant-temperature intrinsic tunneling spectroscopic technique, excluding the overheating effect using the in-situ temperature monitoring combined with the digital proportional-integral-derivative control, is introduced. The implication on the $high-T_c$ superconductivity of the detailed temperature dependencies of the observed spectral weight in $Bi_{2}Sr_{2}CaCu_{2}O_{8+x}\;high-T_c$ material for overdoped and underdoped levels is discussed.

  • PDF

초 저속 순차증착으로 제작한 Bi계 초전도 박막의 생성막 평가 (Analysis of the Hi-system Superconducting Thin Films Fabricated by Layer-by-Layer Deposition Method at an Ultra low growth rate)

  • 양승호;김영표;박용필
    • 한국전기전자재료학회:학술대회논문집
    • /
    • 한국전기전자재료학회 2007년도 하계학술대회 논문집 Vol.8
    • /
    • pp.503-504
    • /
    • 2007
  • $Bi_2Sr_2Ca_{n-1}Cu_nO_x$(n=0, 1, 2)superconducting thin films have been fabricated by atomic layer-by-layer deposition at an ultra low growth rate using IBS(Ion Beam Sputtering) method. During the deposition, 90 mol% ozone gas of typical pressure of $1{\sim}9{\times}10^{-5}$ Torr are supplied with ultraviolet light irradiation for oxidation. XRD and RHEED investigations reveal out that a buffer layer with some different compositions is formed at the early deposition stage of less than 10 units cell and then Bi-2201 oriented along the c-axis is grown.

  • PDF

BSCCO 플라즈마 용사피막의 부분용융열처리 후 어닐링 시간에 따른 초전도 특성 (Characteristics of Plasma Sprayed BSCCO Superconductor Coatings with Annealing Time After Partial Melt Process)

  • 박정식;이선홍;박경채
    • 한국재료학회지
    • /
    • 제24권2호
    • /
    • pp.116-122
    • /
    • 2014
  • $Bi_2Sr_2CaCu_2O_x$(Bi-2212) and $Bi_2Sr_2Ca_2Cu_3O_y$(Bi-2223) high-Tc superconductors(HTS) have been manufactured by plasma spraying, partial melt process(PMP) and annealing treatment(AT). A Bi-2212/2223 HTS coating layer was synthesized through the peritectic reaction between a 0212 oxide coating layer and 2001 oxide coating layer by the PMP-AT process. The 2212 HTS layer consists of whiskers grown in the diffusion direction. The Bi-2223 phase and secondary phase in the Bi-2212 layer were observed. The secondary phase was distributed uniformly over the whole layer. As annealing time goes on, the Bi-2212 phase decreases with mis-orientation and irregular shape, but the Bi-2223 phase increases because a new Bi-2223 phase is formed inside the pre-existing Bi-2212 crystals, and because of the nucleation of a Bi-2223 phase at the edge of Bi-2212 crystals by diffusion of Ca and Cu-O bilayers. In this study the spray coated layer showed superconducting transitions with an onset Tc of about both 115 K, and 50 K. There were two steps. Step 1 at 115 K is due to the diamagnetism of the Bi-2223 phase and step 2 at 50 K is due to the diamagnetism of the Bi-2212 phase.

$(Sr_{1-x}{\cdot}Ca_x)_mTiO_3$ 입계층 세라믹의 유전특성에 관한 연구 (Study on the Dielectric Properties of $(Sr_{1-x}{\cdot}Ca_x)_mTiO_3$ Grain Boundary Layer Ceramics))

  • 김진사;최운식;신철기;김성렬;이준웅
    • 대한전기학회:학술대회논문집
    • /
    • 대한전기학회 1994년도 추계학술대회 논문집 학회본부
    • /
    • pp.215-218
    • /
    • 1994
  • $(Sr_{l-x}{\cdot}Ca_x)_mTiO_3+0.006Nb_2O_5$($0.05{\leq}x{\leq}0.2$, 0.996$N_2$)에서 소결시킨 후 CuO를 시편의 양면에 도포하여 $1100^{\circ}C$에서 2시간동안 열처리함으로써 제작하였다. 결정립의 크기는 Ca의 치환량이 증가함에 따라 촉진되었으나, 20[mol%] 이상 치환시 더 이상 고용되지 못하고 입성장을 억제시켰다. Ca의 치환량이 $10{\sim}15[mol%]$, m=1인 시편에 있어서 우수한 유전특성을 나타내었다. 즉, 비유전율, 유전손실($tan{\delta}[%]$)과 온도변화에 따른 정전용량의 변화율이 각각 >25,000, <0.3[%], <${\pm}10[%]$을 나타내었다. 본 연구에 사용된 모든 시편은 온도의 함수로서 주파수 증가에 따라 유전완화 현상을 나타내었으며, 분산주파수는 $10^6[Hz]$ 이상이었다.

  • PDF