• 한국세라믹학회지
• /
• 제46권3호
• /
• pp.330-335
• /
• 2009

We investigated the effects of the re-oxidation temperature and time on the positive temperature coefficient (PTC) of resistivity characteristics of Sm-doped $BaTiO_3$ sintered at $1200{\sim}1260^{\circ}C$ for 2 h in a reducing atmosphere (3% $H_2/N_2$), followed by re-oxidization processes in air, in which re-oxidization temperature and time were $600{\sim}1000^{\circ}C$ and $1{\sim}10$h, respectively. The result reveals that Smdoped (Ba,Ca)$TiO_3$ ceramics fired in a reducing atmosphere exhibit low PTC characteristics, whereas the sample re-oxidized at $800^{\circ}C$ for 1 h in air exhibit pronounced PTC characteristics. The room-temperature resistivity and jumping characteristics of resistivity (${\rho}_{max}/{\rho}25^{\circ}C$) decrease with Sm contents. The PTC characteristics with reoxidization time at $800^{\circ}C$ have improved about $2{\sim}3$ orders of magnitude whereas differed according to the sintering temperature. The 0.7 at% Sm-doped (Ba,Ca)$TiO_3$ samples reveal the best PTC characteristics in the present range of formula and processes.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 1994년도 추계학술대회 논문집 학회본부
• /
• pp.190-192
• /
• 1994

Microwave dielectric properties of $0.15(Ba_xSr_{0.05})O-0.15(Sm_{2(1-y)}Nd_{2y})O_3-0.7TiO_2$ ($x=0.9{\sim}1.0[mol.]$, y=6[m/0]) and $0.15(Ba_{0.95}Sr_{0.05})O-0.15(Sm_{2(1-y)}Nd_{2y})O_3-zTiO_2$(y=6[m/o], $z=0.66{\sim}0.7[mol.]$) ceramics were investigated with the contents of BaO and $TiO_2$. In the specimen with contents of BaO (0.975[mol.]), dielectric constant, quality factor and temperature coefficient of resonant frequency have good values of 76.52, 3001(at 3[GHz]), +0.71[ppm/$^{\circ}C$], respectively. In the specimen with contents of $TiO_2$(0.69[mol.]), dielectric constant, quality factor and temperature coefficient of resonant frequency showed the maximum values of 80.89, 3057(at 3[GHz]), +26.12[ppm/$^{\circ}C$], respectively.

• 한국전기전자재료학회:학술대회논문집
• /
• 한국전기전자재료학회 2008년도 추계학술대회 논문집 Vol.21
• /
• pp.179-179
• /
• 2008

$BaTiO_3$를 기본조성으로 하는 PTC 써미스터는 Curie 온도이상에서 저항이 급격히 상승하는 산화물 반도체 세라믹이다. 이러한 성질을 이용하여 degaussing 소자, 정온 발열체, 온도센서, 전류 제한소자 등 상업적으로 여러 분야에서 연구되고 있다. 또한 원가절감 등을 위하여 Ni 내부전극을 사용하여 환원 분위기에서 소결하는 칩 타입에 대한 연구가 진행되고 있다. 본 연구에서는 Sm 함량(0.1at%~1.0at%)을 달리한 $BaTiO_3$(Si, Mn, Ca) 계를 선택하여 3%$H_2/N_2$ 분위기에서 1200~$1260^{\circ}C$, 2h 소결한 후 공기 중에서 재산화 처리하고 재산화 시간에 따른 PTC 특성 변화에 대하여 고찰하였다. 재산화 온도와 시간은 각각 $800^{\circ}C$와 0.5h~10h으로 하였다. Sm 함량을 달리하여 환원 분위기에서 소결한 시편의 미세구조와 PTC 특성과의 상관관계를 관찰한 결과, 소결온도가 낮을수록 PTC 특성은 좋아졌으며, 상온 비저항은 Sm 함량이 높아질수록 낮아졌다. 또한 Sm 함량이 높아질수록 jumping ratio$(R_{max}/R_{25^{\circ}C})$는 낮아졌다. 재산화 시간에 따른 PTC 특성은 다소 떨어졌지만 소결온도에 따라 달리 나타났다. Jumping ratio$(R_{max}/R_{25^{\circ}C})$는 Sm을 0.7 at% 첨가한 계에서 재산화를 1시간 처리한 시편에서 가장 우수하였다.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 1994년도 하계학술대회 논문집 C
• /
• pp.1254-1256
• /
• 1994

0.15$(Ba_{0.95}Sr_{0.05})$O-0.15$(Sm_{2(1-x)}Nd-{2x})O_3-0.7TiO_2 (x=0{\sim}10[m/o])$ ceramics were fabricated by mixed-oxide method. Microwave dielectric properties was investigated with the contents of $Nd_2O_3$. Increasing the contents of $Nd_2O_3$ from 0 to 6[m/o], sintered density was increased 5.53 to $5.68[g/ cm^3]$. In the specimen with contents of $Nd_2O_3$(6[m/o]), dielectric content was maximum value of 78.14 and decreased with increasing the contents of $Nd_2O_3$. Quality factor was increased with the contents of $Nd_2O_3$.

• 한국재료학회지
• /
• 제8권8호
• /
• pp.720-725
• /
• 1998

환원.확산법에 의해 $Sm_{2}Fe_{17}N_{x}$ 계 희토류 영구자석을 제조하기 위한 기초연구로서, 우선 $Sm_{2}Fe_{17}$ 금속간화합물의 제조를 위하여, 금속 Ca에 의한 $Sm_2O_3$의 환원반응과 Fe분말중에 Sm의 확산반응을 검토하였다. 그 결과 전자는 $1000^{\circ}C$이상의 고온의 경우에 매우 빠르게 완료되지만, 후자의 Fe분말의 중심까지 Sm의 확산반응의 완료(완전한 균질화조건)는 $1100^{\circ}C$에서 3h 정도의 R-D 반응이 필요하며, 이 확산반응이 전체반응에 있어서 율속단계임을 알았다. Sm-Fe 계의 금속간화합물들의 성장은$ 1000^{\circ}C$이하에서는 $SmFe_2$, $SmFe_3$,$Sm_{2}Fe_{17}$금속간화합물의 3개의 상이 관찰되었으나, $1100^{\circ}C$에서는 $Sm_{2}Fe_{17}$ 금속간화합물의 상만이 관찰되었다. 본 연구에서 얻어진 최종시료의 산소 및 Ca량은 각각 0.72wt% 및 0.11wt%이었다.

• 대한금속재료학회지
• /
• 제48권9호
• /
• pp.842-846
• /
• 2010

In the present study, the reduction-diffusion method was employed to produce Sm-Fe alloy powder. It was confirmed that the amount of unreacted ${\alpha}-Fe$ in $Sm_2Fe_{17}$ matrix gradually decreased as the percentage of $Sm_2O_3$ increased. $Sm_2Fe_{17}$ single-phase powder was produced by the reduction-diffusion method with 40% excess $Sm_2O_3$. The Ca and Oxygen contents of the powder were approximately 300 ppm and 1600 ppm, respectively, after washing and acid treatment. By a subsequent nitrogenation, $Sm_2Fe_{17}N_x$ magnetic powders were produced. The coercivity of the powder increased with decreasing of the particle size by ball milling, and the highest coercivity of 2850 Oe was obtained after milling for 10 hours.

• 한국전기전자재료학회논문지
• /
• 제27권7호
• /
• pp.477-482
• /
• 2014

$CaNb_2O_6:RE^{3+}$ (RE=Sm or Eu) phosphor powders were prepared with different contents of activator ions by using solid-state reaction method. The X-ray diffraction patterns exhibited that the phosphors synthesized with different activator ions showed an orthorhombic system with a main (131) diffraction peak. The maximum size of the grain particles, determined from the measurement of scanning electron microscopy, was observed at 0.05 mol of $Eu^{3+}$ ions and at 0.01 mol of $Sm^{3+}$. As for the $Eu^{3+}$-doped phosphor powders, the excitation spectra were composed of a broad band peaked at 278 nm and several weak bands in the range of 350~500 nm, and the highest red emission spectrum was observed at 0.15 mol of $Eu^{3+}$ ions. As for the $Sm^{3+}$-activated phosphor powders, three strong emission bands under excitation at 273 nm were observed at 570, 612, and 659 nm, respectively. The intensities of all the emission bands approached maxima for 0.05 mol of $Sm^{3+}$ ions. The optical properties show that the $Eu^{3+}$- or $Sm^{3+}$-doped $CaNb_2O_6$ powders are promising red-orange emitting phosphor powders applicable to full-color photonic devices.

• 한국분말재료학회지
• /
• 제26권5호
• /
• pp.395-404
• /
• 2019

Aluminum nitride (AlN) has excellent electrical insulation property, high thermal conductivity, and a low thermal expansion coefficient; therefore, it is widely used as a heat sink, heat-conductive filler, and heat dissipation substrate. However, it is well known that the AlN-based materials have disadvantages such as low sinterability and poor mechanical properties. In this study, the effects of addition of various amounts (1-6 wt.%) of sintering additives $Y_2O_3$ and $Sm_2O_3$ on the thermal and mechanical properties of AlN samples pressureless sintered at $1850^{\circ}C$ in an $N_2$ atmosphere for a holding time of 2 h are examined. All AlN samples exhibit relative densities of more than 97%. It showed that the higher thermal conductivity as the $Y_2O_3$ content increased than the $Sm_2O_3$ additive, whereas all AlN samples exhibited higher mechanical properties as $Sm_2O_3$ content increased. The formation of secondary phases by reaction of $Y_2O_3$, $Sm_2O_3$ with oxygen from AlN lattice influenced the thermal and mechanical properties of AlN samples due to the reaction of the oxygen contents in AlN lattice.

• 수산해양교육연구
• /
• 제19권1호
• /
• pp.1-7
• /
• 2007

The purpose of this study was to investigate geochemical characteristics of surface sediments in the Keum river estuary adjacent to coastal area. For this study we collected the 21 surface sediments samples. Mean size of surface samples was $3.24{\sim}6.65{\phi}$ on inner estuary and was $2.15{\sim}3.42{\phi}$ on outside estuary. Surface samples were composed of silt on inner estuary and were composed of sand which was more larger than $4{\phi}$ on outside estuary. Most major elements except CaO, $Na_2O$ showed good relationships between variation of contents and grain size. Contents of $Al_2O_3$, $Fe_2O_3$, MgO, $K_2O$, $TiO_2$, $P_2O_5$ and $M_nO$ were increased predominately owing to the variation of mean size of surface samples. Contents of Co, Cr, Cu, Li, Sr, Zn, La, Ce, Pb, Rb, Nd have a good relationships with grain size but Ba, Th, Sm have not. All of major and minor elements contents except $K_2O$ and Ba were less than world mean contents of shallow surface sediments but apprehend a high pollution possibility on silt sediments in the estuaries.

• 분석과학
• /
• 제14권4호
• /
• pp.291-299
• /
• 2001

사용후핵연료내 핵분열생성물중 Sm 동위원소 정량을 위한 분리 및 정제에 관한 연구를 수행하였다. 일차적으로 핵분열생성물 대신 여러 비방사성 금속이온(Cs, Ba, Gd, Eu, Sm 및 Nd)들로 구성된 모의용액을 시료로 사용하였다. Sm은 AG $1{\times}8$ 음이온교환수지관에서 1 M $HNO_3$/90% MeOH 용액으로 세척 후 0.5 M $HNO_3$/80% MeOH 용액으로 용리하였다. 용출액에 함유되어 있는 미량의 Ba을 제거하기 위하여 0.2 M alpha-hydroxyisobutyric acid 용액(pH 4.5-4.6)으로 전처리한 AG $50W{\times}8$ 양이온교환수지관에서 정제하였으며, 순수한 Sm을 90% 이상 분리, 회수할 수 있었다. 실제 PWR 사용후핵연료에 함유되어 있는 Sm의 분리 및 정제에 적용하여 용출액을 질량분석한 결과 Gd, Eu, Pm, Nd 및 BaO에 의한 동중원소 영향이 나타나지 않았다. $^{154}Sm$ 스파이크를 이용한 동위원소희석 질량분석법으로 사용후핵연료 중의 Sm 및 각각의 성분 동위원소($^{147}Sm$, $^{148}Sm$, $^{149}Sm$, $^{150}Sm$, $^{151}Sm$, $^{152}Sm$ and $^{154}Sm$)들을 정량하였다.