• Journal of the Korean Ceramic Society
• /
• v.40 no.2
• /
• pp.167-171
• /
• 2003

CMP(Chemical Mechanical Planarization) slurry for STI process is made by mechanically synthesized$CeO_2$as abrasive. The abrasive can be stabilized by electrostatic or steric stabilization in aqueous slurry and steric stabilization is more effective for long-term stability. Blanket-type$SiO_2$and $Si_3N_4$ wafers are polished with CMP slurry containing$CeO_2$synthesized in 50$0^{\circ}C$ or $700^{\circ}C$. Removal rate and surface uniformity of$SiO_2$and$Si_3N_4$wafer and selectivity are influenced by synthetic condition of abrasive, suspension stability and pH of slurries.

• Proceedings of the Korean Institute of Electrical and Electronic Material Engineers Conference
• /
• 2008.11a
• /
• pp.7-8
• /
• 2008

The memory characteristics of charge trap flash (CTF) with $HfO_2$ charge trap layer were investigated. Especially, we focused on the effects of tunnel barrier engineering consisted of $SiO_2/Si_3N_4/SiO_2$ (ONO) stack or $Si_3N_4/SiO_2/Si_3N_4$ (NON) stack. The programming and erasing characteristics were significantly enhanced by using ONO or NON tunnel barrier. These improvement are due to the increase of tunneling current by using engineered tunnel barrier. As a result, the engineered tunnel barrier is a promising technique for non-volatile flash memory applications.

• Journal of the Korean Ceramic Society
• /
• v.44 no.6 s.301
• /
• pp.338-342
• /
• 2007

Porous silicon nitride ceramics were prepared by SHS (Self-Propagating High Temperature Synthesis) from silicon powder, silicon nitride powder and pore-forming precursor. The microstructure, porosity and the flexural strength of the porous silicon nitride ceramics were varied according to the Si/Si3N4 ratio, size and amount of the pore-forming precursors. Some sample exhibited as high flexural strength as $162{\pm}24\;MPa$. The high strength is considered to result from the fine pore size and the strong bonding amoung the silicon nitride particles.

• Journal of the Korean Society of Manufacturing Process Engineers
• /
• v.16 no.1
• /
• pp.36-41
• /
• 2017

In this paper, $Si_3N_4/hBN$ ceramics with various hexagonal boron nitride (hBN) contents (0, 10, 20, or 30 wt%) were fabricated via spark plasma sintering (SPS) at $1500^{\circ}C$, 50MPa, and 10m holding time. The material properties such as the relative density, hardness, and fracture toughness were systematically evaluated according to the hBN content in the $Si_3N_4/hBN$ ceramics. The results show that relative density, hardness, and fracture toughness continuously decreased as the hBN content increased. In addition, peak-step drilling (with tool diameter $500{\mu}m$) was performed to observe the effects of hBN content in micro-hole shape and cutting force. A machined hole diameter of $510{\mu}m$ (entrance) and stable cutting force were obtained at 30 wt% hBN content. Consequently, $Si_3N_4/30wt%$ hBN ceramic is a feasible material upon which to apply semi-conductor components, and this study is very meaningful for determining correlations between material properties and machining performance.

• Proceedings of the Korean Vacuum Society Conference
• /
• 2014.02a
• /
• pp.359-359
• /
• 2014

In this study, surface plasmon resonance structures for the selective and the enhanced transmission of infrared light were designed. In order to relieve the large discontinuity of refractive index between air and metal hole array, $Si_3N_4$ was used as the impedance matching layer. Experimental parameter were calculated and determined in advance by the rigorous coupled wave analysis (RCWA) simulation, and then the experiment was carried out. A 2-dimensional metal hole array structures were patterned on the size of $1{\times}1cm^2$ GaAs substrate using photolithography process, and 5 nm thick Ti, 50 nm thick Au were deposited by E-beam evaporator, respectively. Subsequently, $Si_3N_4$ films with various thicknesses (150, 350, 550, and 750 nm) were deposited by plasma enhanced chemical vapor deposition (PECVD). For the comparison, transmittance of specimens with and without $Si_3N_4$ was measured using Fourier transform infrared spectroscopy (FTIR) in the range of $2.5-15{\mu}m$. Furthermore, the surface and the cross-sectional images were collected from the specimens by scanning electron microscopy (SEM). From the results, it was demonstrated that the transmittance was enhanced up to 80% by the deposition of 750 nm $Si_3N_4$ at $6.23{\mu}m$. It has advantage of enhanced transmission despite the simple fabrication process.

• Journal of the Korea Institute of Military Science and Technology
• /
• v.25 no.6
• /
• pp.580-585
• /
• 2022

In this study, the high-temperature dielectric constant of Si₃N₄ ceramics, a representative non-oxide-based radome material, was evaluated and the cause of the dielectric constant change was analyzed in relation to the oxidation behavior. The dielectric constant of Si₃N₄ ceramics was 7.79 at room temperature, and it linearly increased as the temperature increased, showing 8.42 at 1,000 ℃. As results of analyzing the microstructure and phase for the Si₃N₄ ceramics before and after heat-treatment, it was confirmed that oxidation did not occur at all or occurred only on the surface at a very insignificant level below 1,000 ℃. Based on this, it is concluded that the increase in the dielectric constant according to the temperature increase of Si₃N₄ ceramics is irrelevant to the oxidation behavior and is only due to the activation of charge polarization.

• Proceedings of the Korean Institute of Electrical and Electronic Material Engineers Conference
• /
• 2008.11a
• /
• pp.135-136
• /
• 2008

이 실험에서는 비휘발성 메모리에서의 블로킹 층으로 $SiN_x$ 박막을 사용하였다. ELA (poly-Si) 기판위에 $SiO_xN_y$ 박막을 성장하기 전에 BHF를 이용해 자연 산화막을 제거하였다. 터널 층을 위해 2.7nm두께의 $SiO_xN_y$를 ICP-CVD 장비를 이용해 유리기판위에 증착하였다. 다음으로 $SiH_4/H_2$기체를 이용， ICP-CVD장비를 이용해 전하 저장을 위한 a-Si 박막을 증착하고, 마지막으로 a-Si층 위에 $SiN_x$ 층을 형성하였다. $SiN_x$ 박막을 형성하는데 최적의 조건을 찾기 위해 가스의 구성 비율 및 증착시간을 변화시키고 온도와 RF power도 바꿔주었다. 굴절률이 1.79 고 두께가 30 nm 인 $SiN_x$는 블로킹 층으로 사용하기 위한 것이다. 제작된 NSO-NVM 소자의 전기적 메모리 특성은 on current가 약 $10^{-5}$ A 이고 off current가 약 $5\times10^{-13}$ A로 전류 점멸비$(I_{ON}/I_{OFF})$는 약 $1\times10^7$ 이고 Swing 값은 0.53V/decade 이다. 1ms 동안의 programming/erasing 결과 약 3.5 V의 넓은 메모리 윈도우 크기를 가진다는 것을 확인할 수 있다.

• Journal of the Institute of Electronics Engineers of Korea SD
• /
• v.38 no.3
• /
• pp.229-235
• /
• 2001

Uncooled pyroelectric thin-film (Ba,Sr)TiO$_3$ infrared detectors thermally isolated from Si-substrate by Si$_3$N$_4$/SiO$_2$/Si$_3$N$_4$-membrane have been fabricated, and figures of merit for detectors were examined. The detector at $25^{\circ}C$ in air showed relatively high voltage responsivity of about 168.8 V/W and low specific detectivity of about 2.6$\times$10$^4$cm.Hz$^{1}$2//W at 1 Hz-chopping frequency because of very small signal-to-noise voltage ratio. It could be found that both thermal noise voltage and thermal time constant of the detector were very large by analyzing dependences of output waveforms on chopping frequency and temperature.

• Proceedings of the Korean Vacuum Society Conference
• /
• 2010.02a
• /
• pp.128-128
• /
• 2010

중적외선 영역은 장애물에 의해서 파장의 흡수가 거의 일어나지 않기 때문에 적외선 소자에서 널리 이용되고 있다. 현재 대부분의 중적외선 소자에는 HgCdTe (MCT)가 사용되고 있지만, 3성분계 화합물이 가지는 여러 문제를 가지고 있다. 반면에, 2성분계 화합물인 인듐안티모나이드 (InSb)는 중적외선 영역 ($3-5\;{\mu}m$) 파장 대에서 HgCdTe와 대등한 소자 특성을 나타냄과 동시에 낮은 기판 가격, 소자 제작의 용이성, 그리고 야전과 우주 공간에서 소자 동작의 안정성 때문에 HgCdTe를 대체할 물질로 주목을 받고 있다. InSb는 미국과 이스라엘과 같은 일부 선진국을 중심으로 연구가 되었지만, 국방 분야의 중요한 소자로 인식되었기 때문에 소자 제작에 관한 기술적인 내용은 국내에 많이 알려지지 않은 상태이다. 따라서 본 연구에서는 InSb 소자 제작의 기초연구로 절연막과 pn 접합 형성에 대한 연구를 수행하였다. 절연막의 특성을 알아보기 위해, InSb 기판위에 $SiO_2$와 $Si_3N_4$를 PECVD (Plasma Enhanced Chemical Vapor Deposition)로 증착을 하였다. 절연막의 계면 트랩 밀도는 77K에서 C-V (Capacitance-Voltage) 분석을 통하여 계산하였으며, Terman method 방법을 이용하였다.[1] $SiO_2$는 $120-200^{\circ}C$의 온도 영역에서 계면 트랩 밀도가 $4-5\;{\times}\;10^{11}cm^{-2}$범위를 가진 반면, $240^{\circ}C$의 경우 계면 트랩 밀도가 $21\;{\times}\;10^{11}cm^{-2}$로 크게 증가하였다. $Si_3N_4$는 $SiO_2$ 절연막에 비해서 3배 정도의 높은 계면 트랩 밀도 값을 나타내었으며. Remote PECVD 장비를 이용하여 $Si_3N_4$ 절연막에 관한 연구를 추가적으로 진행하여 $7-9\;{\times}\;10^{11}cm^{-2}$ 정도의 계면 트랩 밀도 값을 구할 수가 있었다. 따라서 InSb에 대한 절연막은 $200^{\circ}C$ 이하에서 증착된 $SiO_2$와 Remote PECVD로 증착 된 $Si_3N_4$가 적합하다고 할 수 있다. 절연막 연구와 더불어 InSb 소자의 pn 접합 연구를 진행하였다. n-InSb (100) 기판 ($n\;=\;0.2-0.85\;{\times}\;10^{15}cm^{-3}$ @77K)에 $Be^+$이온 주입하여 p층을 형성하여 제작 되었으며, 열처리 조건에 따른 소자의 특성을 관찰 하였다. $450^{\circ}C$에서 30초 동안 RTA (Rapid Thermal Annealing)공정을 진행한 샘플은 -0.1 V에서 $50\;{\mu}A$의 높은 암전류가 관찰되었으며, 열처리 조건을 60, 120, 180초로 변화하면서 소자의 특성 변화를 관찰하였다.

• Proceedings of the Korean Society Of Semiconductor Equipment Technology
• /
• 2002.11a
• /
• pp.14-19
• /
• 2002

In this study, as Cu diffusion barrier, tantalum nitrides were successfully deposited on Si(100) substrate and SiO2 by plasma assisted atomic layer deposition(PAALD) and thermal ALD, using pentakis (ethylmethlyamino) tantalum (PEMAT) and $NH_3$ as precursors. The TaN films were deposited on $250^{\circ}$C by both method. The growth rates of TaN films were $0.8{\AA}$/cycle for PAALD and $0.75{\AA}$/cycle for thermal ALD. TaN films by PAALD showed good surface morphology and excellent step coverage for the trench with an aspect ratio of h/w - $1.8 : 0.12 \mu\textrm{m}$ but TaN films by thermal ALD showed bad step coverage for the same trench. The density for PAALD TaN was $11g/\textrm{cm}^3$ and one for thermal ALD TaN was $8.3g/\textrm{cm}^3$. TaN films had 3 atomic % carbon impurity and 4 atomic % oxygen impurity for PAALD and 12 atomic % carbon impurity and 9 atomic % oxygen impurity for thermal ALD. The barrier failure for Cu(200nm)/TaN(l0nm)/$SiO_2(85nm)$/Si structure was shown at temperature above $700^{\circ}$C by XRD, Cu etch pit analysis.