• 한국세라믹학회지
• /
• 제33권4호
• /
• pp.379-384
• /
• 1996

The H2S sensing mechanism of CuO-SnO2 was confirmed by analyzing the electrical-resistance variation with temperature under an H2S atmosphere. While the resistance of CuO-SnO2 thick film at N2+H2S atmosphere was almost invariant with change in temperature it increased with increasing temperature for air +H2S atmos-phere. This behavior was analyzed using an equation derived from a basic assumption based on the H2S sensing mechanism proposed before. the experimental results are sufficiently explained with the equation derived which showed that the H2S sensing mechanism was reasonable. The equation also gave a detailed analysis and physical meaning to the behavior of the resistance variation with change in H2S concentration.

• 소성∙가공
• /
• 제15권2호
• /
• pp.112-117
• /
• 2006

Sliding wear mechanism of a high nitrogen austenitic 18Cr-18Mn-2Mo-0.9N steel has been investigated. Dry sliding wear tests of the steel were carried out at various loads of IN-10N under a constant sliding speed condition of 0.15m/s against AISI 52100 bearing steel balls. Solution ($1050^{\circ}C$) and isothermal aging ($900^{\circ}C$) heat treatments were performed on the steel and the effect of the heat treatments on the wear was investigated. Wear rates of the solution-treated steel specimen remained low until 5N load, and then increased abruptly at loads above 5N. The rates of isothermally aged specimens were low and increased gradually with the applied load. Worn surfaces, their cross sections, and wear debris of the steel specimens were examined with a scanning electron microscopy. Phases of the heat-treated specimen and the wear debris were identified using XRD. The transformed phase underneath a sliding track was investigated and analyzed using a TEM. Effects of the phase transformation during the wear and $Cr_{2}N$ precipitates formed during the isothermal aging on the wear of the austenitic steel were discussed.

• Bulletin of the Korean Chemical Society
• /
• 제33권12호
• /
• pp.4117-4121
• /
• 2012

The solvolysis rate constants of allyl chloroformate ($CH_2=CHCH_2OCOCl$, 3) in 30 different solvents are well correlated with the extended Grunwald-Winstein equation, using the $N_T$ solvent nucleophilicity scale and $Y_{Cl}$ solvent ionizing scale, with the sensitivity values of $0.93{\pm}0.05$ and $0.41{\pm}0.02$ for l and m, respectively. These l and m values can be considered to support a $S_N2$ reaction pathway. The activation enthalpies (${\Delta}H^{\neq}$) were 12.5 to 13.4 $kcal{\cdot}mol^{-1}$ and the activation entropies (${\Delta}S^{\neq}$) were -34.4 to -37.3 $cal{\cdot}mol^{-1}{\cdot}K^{-1}$, which is also consistent with the proposed bimolecular reaction mechanism. The solvent kinetic isotope effect (SKIE, $k_{MeOH}/k_{MeOD}$) of 2.16 was also in accord with the $S_N2$ mechanism. The values of product selectivity (S) for the solvolyses of 3 in alcohol/water mixtures was 1.3 to 3.9, which is also consistent with the proposed bimolecular reaction mechanism.

• 한국소성가공학회:학술대회논문집
• /
• 한국소성가공학회 2005년도 추계학술대회 논문집
• /
• pp.105-108
• /
• 2005

Sliding wear mechanism of a high nitrogen austenitic 18Cr-18Mn-2Mo-0.9N steel has been investigated. Dry sliding wear tests of the steel were carried out at various loads of 1N-10N under a constant sliding speed condition of 0.15m/s against AISI 52100 bearing steel balls. Solution $(1050^{\circ}C)$ and isothermal aging $(900^{\circ}C)$ heat treatments were performed on the steel and the effect of the heat treatments on the wear were investigated. Wear rates of the solution-treated steel specimen remained low until 5N, and then increased abruptly at loads above 5N. The rates of isothermally aged specimens were low and increased gradually with the applied load. Worn surfaces, their cross sections, and wear debris of the steel specimens were examined with a scanning electron microscopy. Phases of the heat-treated specimen and the wear debris were identified using XRD. Phases transformed underneath the sliding track during the wear were investigated and analyzed using TEM. Effects of the phase transformation during the wear and $Cr_2N$ precipitates formed during the isothermal aging on the wear of the austenitic steel were discussed.

• 대한화학회지
• /
• 제41권7호
• /
• pp.351-356
• /
• 1997

haloallene 유도체(1-halo-3-phenyl-1,2-propadiene)에 대해 EHMO계산을 하여, 에너지적으로 안정한 haloallene 분자의 구조를 결정하였다. MO 계산 데이터와 속도론적인 실험 결과로부터 haloallene의 가수분해반응 메카니즘을 제안하였다. pH 8.0 이하에서는 중간체로 carbonium ion Ⅱ이 생성되는 용매도움 $S_N1$ 메카니즘에 의해 진행된다. 그러나 pH 9.5 이상에서는 전위상태 Ⅲ를 거치는 $S_N2'$ 메카니즘에 의해 진행된다.

• 대한화학회지
• /
• 제49권6호
• /
• pp.554-559
• /
• 2005

• 대한화학회지
• /
• 제41권6호
• /
• pp.313-319
• /
• 1997

Diazidophenylmethane 유도체들(X: p-H, $p-OCH_3,\;p-F,\;p-CH_3$)을 합성하여 25$^{\circ}C$의 50:50(v/v) MeOH/$H_2O$ 혼합용매(${\mu}=0.1$ : KCl)에서의 pH 변화에 따른 가수분해 반응 속도상수를 측정하여 유도된 반응속도식과 치환기효과, 용매효과, 염효과, 열역학적 활성화 파라미터, 그리고 생성물분석의 결과로부터 낮은 $pH(0{\leq}pH<2)$에서는 $S_N2_CA$, 중간 pH(2$S_N1$, 그리고 높은 $pH(12에서는 $S_N2$ 반응메카니즘을 각각 제안하였다.

• Bulletin of the Korean Chemical Society
• /
• 제30권10호
• /
• pp.2413-2418
• /
• 2009

Rates of solvolyses of 4-nitrophenyl phenyl thiophosphorochloridate (4-N$O_2$PhOP(S)(Cl)OPh, $\underline{1}$) in ethanol, methanol, and aqueous binary mixtures incorporating ethanol, methanol, acetone, and 2,2,2-trifluroethanol (TFE) are reported. Thermodynamic parameters were determined at several temperatures in three representative solvents. The extended Grunwald-Winstein equation was applied to 29 solvents and the correlation coefficient (R) showed 0.959. The sensitivities (l = 1.37 and m = 0.62) are similar to those obtained for diphenyl thiophosphorochloridate (($PhO)_2$PSCl, $\underline{2}$), diphenyl phosphorochloridate (($PhO)_2$POCl, $\underline{3}$), diphenyl phosphinic chloride ($Ph_2$POCl, $\underline{4}$), and diphenyl thiophosphinic chloride ($Ph_2$PSCl, $\underline{5}$). The solvolytic reaction mechanism of 4-nitrophenyl phenyl thiophosphorochloridate ($\underline{1}$) is suggested to be proceeded a $S_N$2 process as previously reported result. The activation enthalpies are shown as slightly low as ${\Delta}H^{\neq}\;=\;9.62\;to\;11.9\;kcal{\cdot}mol^{-1}$ and the activation entropies are shown as slightly high negative value as ${\Delta}S^{\neq}\;=\;-34.1\;to\;-44.9\;cal{\cdot}mol^{-1}{\cdot}K^{-1}$ compared to the expected $S_N$2 reaction mechanism. Kinetic solvent isotope effects are accord with a typical $S_N$2 mechanism as shown in the range of 2.41 in MeOH/ MeOD and 2.57 in $H_2O/D_2O$ solvent mixtures.

• 대한화학회지
• /
• 제63권4호
• /
• pp.233-236
• /
• 2019

In this study, the solvolysis of cyclohexanesulfonyl chloride (1) was studied by kinetics in ethanol-water, methanol-water, acetone-water, and 2,2,2-trifluoroethanol (TFE)-water binary solvent systems. The rate constants were applied to the extended Grunwald-Winstein equation, to obtain the values of m = 0.41 and l = 0.81. These values suggested $S_N2$ mechanism in which bond formation is more important than bond breaking in the transition state (TS). Relatively small activation enthalpy values (11.6 to $14.8kcal{\cdot}mol^{-1}$), the large negative activation entropy values (-29.7 to $-38.7cal{\cdot}mol^{-1}{\cdot}K^{-1}$) and the solvent kinetic isotope effects (SKIE, 2.29, 2.30), the solvolyses of the cyclohexanesulfonyl chloride (1) proceeds via the $S_N2$ mechanism.

• 대한화학회지
• /
• 제23권6호
• /
• pp.368-373
• /
• 1979

염화 N,N-이메틸 및 N,N-이에틸카르바모일의 가용매분해반응과 할라이드 교환$(Cl^-,\;Br^-,\;I^-)$반응, 및 염화 N,N-이페닐카르바모일의 가용매분해반응을 속도론적으로 연구하였다. 속도자료와 MO결과로부터 (1) 이 알킬화합물들은$S_N2$ 메카니즘으로, 이페닐화합물은 $S_N1$ 메카니즘으로 반응함을 알았고, (2) 염화이온교환에서는 결합절단이 중요한 반면, $Br^-$ 및 $I^-$ 교환반응에서는 결합 형성이 중요함을 알 수 있었다.