• Journal of the Korean Institute of Electrical and Electronic Material Engineers
• /
• v.22 no.4
• /
• pp.327-332
• /
• 2009

In the devices structure of ITO/N,N'-diphenyl-N,N' bis (3-methylphenyl)-1,1'-biphenyl-4,4'-diamine (TPD) /tris (8-hydroxyquinoline)aluminum$(Alq_3)$electron-transport-layer(ETL)(2,9-Dimethyl-4,7-diphenyl-1,10-phenanthroline(BCP))/Al, we have studied the efficiency improvement of organic light-emitting diodes depending on the thickness variation of BCP using electron transport layer. The thickness of TPD and $Alq_3$ was manufactured 40 nm, 60 nm under a base pressure of $5{\times}10^{-6}$ Torr using at thermal evaporation, respectively. The TPD and $Alq_3$ layer were evaporated to be deposition rate of $2.5{\AA}/s$. And the BCP was evaporated to be a4 a deposition of $1.0{\AA}/s$. As the experimental results, we found that the luminous efficiency and the external quantum efficiency of the device is superior to others when thickness of BCP is 5 nm. Also, operating voltage is lowest. Compared to the ones from the devices without BCP layer, the luminous efficiency and the external quantum efficiency were improved by a factor of four hundred ninty and five hundred, respectively. And operating voltage is reduced to about 2 V.

• TTA Journal
• /
• s.96
• /
• pp.69-77
• /
• 2004

We developed QoS based Optical Transport System for premium packet transport network.. Our system will reduce capital cost and operation cost. And also It generate QoS guaranteed L2 VPN service for enterprise. The key technologies are packet emulation for

• YAKHAK HOEJI
• /
• v.39 no.4
• /
• pp.411-416
• /
• 1995

The single-pass perfusion experiments were performed in anesthetized rats to investigate the effects of perfusates and their osmolality on the water transport and to determine the correlation between the extent of water transport and the volume change of perfusate. Phenol red was used as a nonabsorbable marker. In normal rats, when perfused at a flow rate of 0.5 ml/min, 2-(N-rnorpholino) ethanesulfonic acid (MES) and S$\phi$rensen's phosphate buffers showed minimal net water transport as 0.125 and 0.173 %/cm of intestinal length, respectively. Hypotonic perfusate of 200 mOsm/kg of water and hypertonic perfusate of 400 mOsm/kg of water generated significant water transport compared with isotonic perfusate of 300 mOsm/kg of water. There was a linear correlation between the extent of water transport and the volume change of perfusate, suggesting that the volume change can be used as a measure of water transport.

• 대한방사선방어학회:학술대회논문집
• /
• 2010.04a
• /
• pp.96-97
• /
• 2010

• Nuclear Engineering and Technology
• /
• v.52 no.3
• /
• pp.485-498
• /
• 2020

A diffusion synthetic acceleration (DSA) technique for the S_N transport equation discretized with the linear discontinuous expansion method with subcell balance (LDEM-SCB) on unstructured tetrahedral meshes is presented. The LDEM-SCB scheme solves the transport equation with the discrete ordinates method by using the subcell balances and linear discontinuous expansion of the flux. Discretized DSA equations are derived by consistently discretizing the continuous diffusion equation with the LDEM-SCB method, however, the discretized diffusion equations are not fully consistent with the discretized transport equations. In addition, a fine mesh rebalance (FMR) method is devised to accelerate the discretized diffusion equation coupled with the preconditioned conjugate gradient (CG) method. The DSA method is applied to various test problems to show its effectiveness in speeding up the iterative convergence of the transport equation. The results show that the DSA method gives small spectral radii for the tetrahedral meshes having various minimum aspect ratios even in highly scattering dominant mediums for the homogeneous test problems. The numerical tests for the homogeneous and heterogeneous problems show that DSA with FMR (with preconditioned CG) gives significantly higher speedups and robustness than the one with the Gauss-Seidel-like iteration.

• Proceedings of the Korean Society of Precision Engineering Conference
• /
• 2011.06a
• /
• pp.437-438
• /
• 2011

• Proceedings of the Korean Vacuum Society Conference
• /
• 2010.02a
• /
• pp.404-404
• /
• 2010

Despite much works have been done on the geometric structures of ripples, defects and edge atoms in a graphene device, there has been no report showing the direct correlation between the structures and the transport property. Unlike scanning tunneling microscopy or other electron microscopes, Scanning Gate Microscope (SGM) is a unique microscopic tool with which the local electronic structure and the transport property of a device can be measured simultaneously. We have performed a transport measurement in nanometer scale using a scanning gate microscope (SGM). We have found the nanoscopic pictures of electron and hole puddles and the role of graphene- device edges in the transport measurements. These experimental findings were successfully explained with a theoretical model.

• Proceedings of the Korean Magnestics Society Conference
• /
• 2003.06a
• /
• pp.21-21
• /
• 2003

Microstructure and magnetic transport phenomina in rf sputtered AlN/Co type ten-layered discontinuous films of nanoscaled [AlN (3 nm)/Co (t nm)]...$\sub$10/ with t$\sub$Co/=1.0∼2.0 nm have been investigated. The microstructure and tunneling magnetic resistance of the samples are strongly dependent on the thickness of Co layer. Negative tunneling magneto-resistance due to the spin-dependent transport has been observed along the current-in-plane configuration in the samples having the Co layers below 1.6 nm thick. When the thickness of Co layer was less than 1,2 nm, randomly oriented granular Co particles were completely isolated and embedded in amorphous AlN matrix, and the films showed the superparamagnetic behavior with a high MR value of Δ$\rho$/$\rho$$\sub$0/=1.8 %. As t$\sub$Co/ increases, a transition from the regime of co-existence of superparamagnetic and ferromagnetic behaviors to ferromagnetic behavior was observed. Tunneling barrier called "decay length for tunneling" for the films having the thickness of Co layer from 1.4 to 1.6 nm was measured to be ranged from 0.004 to 0.021 ${\AA}$$\^$-1/.

• Proceedings of the Korean Magnestics Society Conference
• /
• 2002.12a
• /
• pp.148-149
• /
• 2002

In recent years, semiconductor spintronics has been rapidly developing due to potential device applications, in which the spin of charge carriers (electrons or holes) provides novel functionalities to carry signals and process information. Diluted magnetic semiconductors (DMSs) are well known to exhibit intriguing properties such as carrier-mediated ferromagnetism and spin-dependent transport resulting from the coupling between the charge transport states and the magnetic moments (spin) [1-3]. (omitted)

• Journal of the Korean Institute of Electrical and Electronic Material Engineers
• /
• v.22 no.1
• /
• pp.74-80
• /
• 2009

In the structure of ITO/N,N'-diphenyl-N,N' bis (3-methylphenyl)-1,1'-biphenyl-4,4'-diamine(TPD)/tris (8-hydroxyquinoline)aluminum($Alq_3$)/Al device, we studied the efficiency improvement of organic light-emitting diodes due to variation of deposition rate of hole transport layer (TPD) materials using hole-size of crucible boat. The thickness of TPD and $Alq_3$ was manufactured 40 nm, 60 nm, respectively under a base pressure of $5{\times}10^{-6}$ Torr using a thermal evaporation. The $Alq_3$ used for an electron-transport and emissive layer were evaporated to be at a deposition rate of $2.5\;{\AA}/s$. When the deposition rate of TPD increased from 1.5 to $3.0\;{\AA}/s$, we studied the efficiency improvement of TPD using the hole-size of crucible is 1.0 mm. When the deposition rate of TPD is $2.5\;{\AA}/s$, we found that the average roughness is rather smoother, the luminous efficiency the external quantum efficiency is superior to the others. Compared to the two from the devices made with the deposition rate of TPD is $2.0\;{\AA}/s$ and $3.0\;{\AA}/s$, the external quantum efficiency was improved by four-times and two-times, respectively.