• 청정기술
• /
• 제24권3호
• /
• pp.212-220
• /
• 2018

순산소 연소기술은 화력발전에 적용 가능한 유망한 온실가스 감축 기술로 평가되고 있다. 본 연구는 환경적 관점에서 순환유동층을 활용한 순산소 연소조건에 로 내 탈황 및 탈질법을 적용하여 NO 및 $SO_2$의 거동을 살펴보는 한편, $SO_3$, $NH_3$, 그리고 $N_2O$의 발생 경향도 관측하였다. 이를 위해, 연소로 내 석회석 및 요소수를 투입하였다. 로 내 탈황법은 연소가스 내 $SO_2$ 농도를 ~403에서 ~41 ppm까지 저감하였다. 또한 $SO_3$ 형성의 주원료인 $SO_2$가 저감되면서 연소가스 내 $SO_3$ 농도도 ~3.9에서 ~1.4 ppm까지 감소되었다. 그러나 석회석 내 $CaCO_3$가 NO의 발생을 촉진하는 현상도 관측되었다. 연소가스 내 NO 농도는로 내 탈질법을 적용하여 ~26 - 34 ppm까지 저감되었다. 요소수 투입량 증가에 따라 연소가스 내 $NH_3$ 농도가 증가하여 최대 ~1.8 ppm으로 나타났으며, $N_2O$의 농도도 ~61에서 ~156 ppm까지 증가하였다. $N_2O$ 발생량 증가 현상은 요소수의 열분해 과정에서 생성된 HNCO가 $N_2O$로 전환되어 나타난다. 본 연구의 결과를 통해 로 내 연소가스 세정법을 적용할 경우 $NO_x$ 및 $SO_x$의 저감뿐만 아니라, 다른 오염물질의 발생에 대한 주의가 필요할 것으로 보인다.

• 한국주거학회논문집
• /
• 제11권1호
• /
• pp.1-12
• /
• 2000

Comparing with an upper generation who have experienced a living with a extended family in a sudden aged tendency, the Parent & Children generation who haven't had a experience in it. So they have much different life styles each generation. It may cause many problems that many generation are living in a common residential space. Further more every generation gets their own characteristic of the life style. In addition, the middle & lower generations's understanding can be explained on their position about an Grand-parent generation's using. In this study, I am going to find out the problems in these situation in comparison with each generation's understanding dwelling environment among them, and then analyze what affection of 3-generation sharing preference standard is given by the differences each generation have with the above result. The standard of living with an Grand-parent generation ; Children generation or living separately through evaluating the Parent & Children generation's residence surroundings will be estimated and the standard of importance of sharing house will be analyzed. And then the result will be used as basic information of planning the 3-generation sharing house.

• 대한가정학회지
• /
• 제35권3호
• /
• pp.245-257
• /
• 1997

The purpose of this study is to interpretate filial piety norm based on reciprocity and fairness. For this goal, we reviewed literature related to social, economical, and cultural situations, centered on the middle of the seventeenth century. The major results can be summerized as follow: The interaction between the parent generation and the married adult children generation changed according to the context of particular social, economical, and cultural conditions, so filial piety norm must also change paced along with social change. Therefore, the concepts of reciprocity and fairness has been an important one which maintains the quality of the relationship between the parent generation and the married adult children generation. So in general, we think it is reasonable to draw the conclusion that there are reciprocity and fairness principle between the parent generation and the married adult children generation.

• 한국멀티미디어학회논문지
• /
• 제17권9호
• /
• pp.1115-1124
• /
• 2014

The objective of this study is to present a new design method at the idea brainstorming process, which requires a great deal of time and effort to seek their own ideas in existing design process and to develop a user support idea forms generation system called OCIGS (Openware Creative Idea Generation System) that makes it possible to create a variety and 3D forms as well as a quantitative evaluation data for the actual types that compose the aesthetic factors and designs of qualitative standards. In order to achieve these objectives : First, overcoming the limitation of 3D form generation ability by establishing visual application system, Second, accepting users' opinions by generating 3D images dynamically, analysing and giving information on the preferred ones on the web on real time, Third, identifying tendency of preference so that they can generate preferred colors and images in future by updating image combination and dropping low-preferred ones. This system would play a role as an idea or form generation application in the actual 3d form design development process.

• 한국의류산업학회지
• /
• 제7권3호
• /
• pp.291-300
• /
• 2005

The purpose of this study is to investigate, analyze the purchasing behavior of fashion goods according to life style and role model of preteen generation, and provide manager or marketing planner for the reference data so that they can understand preteen generation and make proper strategy efficiently. So called, preteen market focusing on 1014 generation (from ten to fourteen years old) is highlighted. This generation created between the year 1989 to 1993 after Seoul Olympic monopolize parent's love in abundant economic environment and rise to the core of consumption subject. Products aiming at this preteen generation continuously though consumption mind was shrunk greatly due to recession. Only 2~3 years before preteen market was regarded as grey zone which doesn't belong to not only children (between six and nine years old) but also teenagers (between fifteen to eighteen years old). But in recent day their purchasing powers have increased rapidly and age group is divided on details, so that preteen market has become a niche market. Subjects were 333 persons consisting of students in the 4th~6th grade of primary school and the 1st~2nd grade of middle school in Daegu city. Measuring instruments are as follows: 5questions to differentiate preteen generation, 22 questions to measure life style, 17questions (which have six sub-factors such as purchase motive, factor of product selection, utilization of informant, purchase time, purchase place, and purchase method) to measure the purchase behavior of fashion goods measurement, and 16 questions (which have four sub-factors such as parent, entertainer & sports stars, brothers and sisters, friends) to measure model of role. Statistical data were processed by SPSS 10.0 programs. Frequencies, Factor analysis, Cluster analysis, ANOVA, Cross analysis, Multiplex regression analysis, and Duncan's multiple range test were carried out.

• 한국정보통신학회논문지
• /
• 제15권2호
• /
• pp.279-285
• /
• 2011

차세대 무선통신에서는 현재 서비스 되고 있는 성능보다 높은 BER(Bit Error Rate)의 성능을 요구한다. 기존의 DVB-RCS(Digital Video Broadcasting - Return Channel via Satellite)에서 사용중인 이진 터보 코드(Double binary Turbo code)는 높은 SNR(에서 오류마루 현상이 발생하여 차세대 무선통신에서 사용하기가 어려움이 있다. 따라서 본 논문에서는 DVB-RCS NG에 적합한 부호화 방식으로 3D-터보 코드(Tthird-dimension Turbo code)의 부복호화기의 구조를 분석하고 성능분석 하였다. 3D-터보 코드는 기존의 DVB-RCS 방식에 rate-1인 post-encoder를 첨가시켜 오류마루 현상을 보완한 부호화기이다. 3D-터보 코드는 post-encoder의 형태, 인터리빙 기법, ${\lambda}$값의 변화에 따라 성능이 달라지므로 본 논문에서는 각 파라메타에 대한 최적의 값을 제시하였다. 전체적으로 3D-터보 코드가 기존의 DVB-RCS 터보 코드에 비해 성능이 우수하고 기존의 문제점인 오류마루 현상을 해결할 수 있음을 알 수 있다.

• 대한임베디드공학회논문지
• /
• 제3권2호
• /
• pp.91-101
• /
• 2008

For a friendly interaction between human and robot, emotional interchange has recently been more important. So many researchers who are investigating the emotion generation model tried to naturalize the robot's emotional state and to improve the usability of the model for the designer of the robot. And also the various emotion generation of the robot is needed to increase the believability of the robot. So in this paper we used the hybrid emotion generation architecture, and defined the generalized context input of emotion generation model for the designer to easily implement it to the robot. And we developed the personality and loyalty model based on the psychology for various emotion generation. Robot's personality is implemented with the emotional stability from Big-Five, and loyalty is made of familiarity generation, expression, and learning procedure which are based on the human-human social relationship such as balance theory and social exchange theory. We verify this emotion generation model by implementing it to the 'user calling and scheduling' scenario.

• International journal of advanced smart convergence
• /
• 제11권3호
• /
• pp.187-196
• /
• 2022

In this paper, we propose an example of designing and constructing a roof-type solar power plant structure equipped with a Pseudo-BIPV (Building-Integrated Photovoltaic) shape suitable for use as a roof of a small warehouse with a sandwich-type panel structure. As the characteristics of the roof-type solar power generation facility to be installed in the small warehouse proposed in this study, the shape of the roof is not a general A type, but a right-angled triangle shape with the slope is designed to face south. We chose a structure in which an inverter for one power plant and a control facility are linked by grouping several roofs of buildings. In addition, the height of the roof structure is less than 20 cm from the floor, and it has a shape similar to that of the BIPV, so it is building-friendly because it is almost in close contact with the roof. At the same time, the roof creates a reflective light source due to the white color. By linking this roof with a double-sided solar panel, we designed it to obtain both the advantage of the roof-friendliness and the advantage of efficiency improvement for the electric power generation based on the double-sided panel. Compared to the existing solar power generation facilities using A-shaped cross-sectional modules, the power generation efficiency of roofs in this case is increased by more than 11%, which we can confirm, through the comparison analysis of monitoring data between power plants in the same area. Therefore, if the roof-type solar structure suitable for the small warehouse we have presented in this paper is used, the facilities of electric power generation is eco-friendly. Further it is easier to obtain facility certification compared to the BIPV, and improved capacity of the power generation can be secured at low material cost. It is believed that the roof-type solar power generation facility we proposed can be usefully used for warehouse or factory-based smart housing. Sensor devices for monitoring, CCTV monitoring, or safety and environment management, operating in connection with the solar power generation facilities, are linked with the Internet of Things (IoT) solution, so they can be monitored and controlled remotely.

• 한국기계가공학회지
• /
• 제16권3호
• /
• pp.1-8
• /
• 2017

Tool path generation is a part of process planning in 3D printing. This is done before actual printing by a computer rather than an AM machine. The mesh geometry of the 3D model is sliced layer-by-layer along the Z-axis and tool paths are generated from the sliced layers. Each 2-dimensional layer can have two types of printing paths: (i) shell and (ii) infill. Shell paths are made of offset loops. During shell generation, twists can be produced in offset loops which will cause twisted tool paths. As a twisted tool path cannot be printed, it is necessary to remove these twists during process planning. In this research, An algorithm is presented to remove twists from the offset loops. To do so the path segments are traversed to identify twisted points. Outer offset loops are represented in the counter-clockwise segment order and clockwise rotation for the inner offset loop to decide which twisted loop should be removed. After testing practical 3D models, the proposed algorithm is verified to use in tool path generation for 3D printing.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 2002년도 추계학술대회 논문집 전기기기 및 에너지변환시스템부문
• /
• pp.300-303
• /
• 2002

Combined generation system of Photovoltaic and wind generation have shortcoming that is different output power according to change of weather. So, the combined generation system is required backup system that such as a storage battery to supply energy, when not enough photovoltaic and wind power source for power supply equally and continually because the energy source is changeable and stable through change of weather as irradiation. temperature, wind speed. wind direction. seasons, etc.