• Clean Technology
• /
• v.24 no.3
• /
• pp.212-220
• /
• 2018

Oxy-fuel combustion is considered as a promising greenhouse gas reduction technology in power plant. In this study, the behaviors of NO and $SO_2$ were investigated under the condition that in-furnace $deNO_x$ and $deSO_x$ methods are applied in oxy-fuel circulating fluidized bed combustion condition. In addition, the generation trends of $SO_3$, $NH_3$ and $N_2O$ were observed. For the purpose, limestone and urea solution were directly injected into the circulating fluidized bed combustor. The in-furnace $deSO_x$ method using limestone could reduce the $SO_2$ concentration in exhaust gas from ~403 to ~41 ppm. At the same experimental condition, the $SO_3$ concentration in exhaust gas was also reduced from ~3.9 to ~1.4 ppm. This trend is mainly due to the reduction of $SO_2$. The $SO_2$ is the main source of the formation of $SO_3$. The negative effect of $CaCO_3$ in limestone, however, was also appeared that it promotes the NO generation. The NO concentration in exhaust gas reduced to ~26 - 34 ppm by appling selective non-catalytic reduction method using urea solution. The $NH_3$ concentration in exhaust gas was appeared up to ~1.8 ppm during injection of urea solution. At the same time, the $N_2O$ generation also increased with increase of urea solution injection. It seems that the HNCO generated from pyrolysis of urea converted into $N_2O$ in combustion atmosphere. From the results in this study, the generation of other pollutants should be checked as the in-furnace $deNO_x$ and $deSO_x$ methods are applied.

• Journal of the Korean housing association
• /
• v.11 no.1
• /
• pp.1-12
• /
• 2000

Comparing with an upper generation who have experienced a living with a extended family in a sudden aged tendency, the Parent & Children generation who haven't had a experience in it. So they have much different life styles each generation. It may cause many problems that many generation are living in a common residential space. Further more every generation gets their own characteristic of the life style. In addition, the middle & lower generations's understanding can be explained on their position about an Grand-parent generation's using. In this study, I am going to find out the problems in these situation in comparison with each generation's understanding dwelling environment among them, and then analyze what affection of 3-generation sharing preference standard is given by the differences each generation have with the above result. The standard of living with an Grand-parent generation ; Children generation or living separately through evaluating the Parent & Children generation's residence surroundings will be estimated and the standard of importance of sharing house will be analyzed. And then the result will be used as basic information of planning the 3-generation sharing house.

• Journal of the Korean Home Economics Association
• /
• v.35 no.3
• /
• pp.245-257
• /
• 1997

The purpose of this study is to interpretate filial piety norm based on reciprocity and fairness. For this goal, we reviewed literature related to social, economical, and cultural situations, centered on the middle of the seventeenth century. The major results can be summerized as follow: The interaction between the parent generation and the married adult children generation changed according to the context of particular social, economical, and cultural conditions, so filial piety norm must also change paced along with social change. Therefore, the concepts of reciprocity and fairness has been an important one which maintains the quality of the relationship between the parent generation and the married adult children generation. So in general, we think it is reasonable to draw the conclusion that there are reciprocity and fairness principle between the parent generation and the married adult children generation.

• Journal of Korea Multimedia Society
• /
• v.17 no.9
• /
• pp.1115-1124
• /
• 2014

The objective of this study is to present a new design method at the idea brainstorming process, which requires a great deal of time and effort to seek their own ideas in existing design process and to develop a user support idea forms generation system called OCIGS (Openware Creative Idea Generation System) that makes it possible to create a variety and 3D forms as well as a quantitative evaluation data for the actual types that compose the aesthetic factors and designs of qualitative standards. In order to achieve these objectives : First, overcoming the limitation of 3D form generation ability by establishing visual application system, Second, accepting users' opinions by generating 3D images dynamically, analysing and giving information on the preferred ones on the web on real time, Third, identifying tendency of preference so that they can generate preferred colors and images in future by updating image combination and dropping low-preferred ones. This system would play a role as an idea or form generation application in the actual 3d form design development process.

• Fashion & Textile Research Journal
• /
• v.7 no.3
• /
• pp.291-300
• /
• 2005

The purpose of this study is to investigate, analyze the purchasing behavior of fashion goods according to life style and role model of preteen generation, and provide manager or marketing planner for the reference data so that they can understand preteen generation and make proper strategy efficiently. So called, preteen market focusing on 1014 generation (from ten to fourteen years old) is highlighted. This generation created between the year 1989 to 1993 after Seoul Olympic monopolize parent's love in abundant economic environment and rise to the core of consumption subject. Products aiming at this preteen generation continuously though consumption mind was shrunk greatly due to recession. Only 2~3 years before preteen market was regarded as grey zone which doesn't belong to not only children (between six and nine years old) but also teenagers (between fifteen to eighteen years old). But in recent day their purchasing powers have increased rapidly and age group is divided on details, so that preteen market has become a niche market. Subjects were 333 persons consisting of students in the 4th~6th grade of primary school and the 1st~2nd grade of middle school in Daegu city. Measuring instruments are as follows: 5questions to differentiate preteen generation, 22 questions to measure life style, 17questions (which have six sub-factors such as purchase motive, factor of product selection, utilization of informant, purchase time, purchase place, and purchase method) to measure the purchase behavior of fashion goods measurement, and 16 questions (which have four sub-factors such as parent, entertainer & sports stars, brothers and sisters, friends) to measure model of role. Statistical data were processed by SPSS 10.0 programs. Frequencies, Factor analysis, Cluster analysis, ANOVA, Cross analysis, Multiplex regression analysis, and Duncan's multiple range test were carried out.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.15 no.2
• /
• pp.279-285
• /
• 2011

The next generation wireless communication systems are required high BER performance better than present performance. Double binary Turbo code have error floor at high SNR, so it cannot be used in next generation wireless communication system. Therefore, many methods are proposed for overcome error floor at DVB-RCS NG(next generation). In this paper, we analysis structure of third-dimension Turbo code(3D-turbo code). 3D-Turbo code overcomes error flow by additive post-encoder in conventional DVB-RCS Turbo code. Performance of 3D-Turbo code is changed by post-encoder form, interleaving method, value of ${\lambda}$. So we are simulated by those parameter and proposed optimal form. By a result, performance of 3D-Turbo is better than conventional DVB-RCS Turbo code and it overcome error floor of conventional DVB-RCS Turbo code.

• IEMEK Journal of Embedded Systems and Applications
• /
• v.3 no.2
• /
• pp.91-101
• /
• 2008

For a friendly interaction between human and robot, emotional interchange has recently been more important. So many researchers who are investigating the emotion generation model tried to naturalize the robot's emotional state and to improve the usability of the model for the designer of the robot. And also the various emotion generation of the robot is needed to increase the believability of the robot. So in this paper we used the hybrid emotion generation architecture, and defined the generalized context input of emotion generation model for the designer to easily implement it to the robot. And we developed the personality and loyalty model based on the psychology for various emotion generation. Robot's personality is implemented with the emotional stability from Big-Five, and loyalty is made of familiarity generation, expression, and learning procedure which are based on the human-human social relationship such as balance theory and social exchange theory. We verify this emotion generation model by implementing it to the 'user calling and scheduling' scenario.

• International journal of advanced smart convergence
• /
• v.11 no.3
• /
• pp.187-196
• /
• 2022

In this paper, we propose an example of designing and constructing a roof-type solar power plant structure equipped with a Pseudo-BIPV (Building-Integrated Photovoltaic) shape suitable for use as a roof of a small warehouse with a sandwich-type panel structure. As the characteristics of the roof-type solar power generation facility to be installed in the small warehouse proposed in this study, the shape of the roof is not a general A type, but a right-angled triangle shape with the slope is designed to face south. We chose a structure in which an inverter for one power plant and a control facility are linked by grouping several roofs of buildings. In addition, the height of the roof structure is less than 20 cm from the floor, and it has a shape similar to that of the BIPV, so it is building-friendly because it is almost in close contact with the roof. At the same time, the roof creates a reflective light source due to the white color. By linking this roof with a double-sided solar panel, we designed it to obtain both the advantage of the roof-friendliness and the advantage of efficiency improvement for the electric power generation based on the double-sided panel. Compared to the existing solar power generation facilities using A-shaped cross-sectional modules, the power generation efficiency of roofs in this case is increased by more than 11%, which we can confirm, through the comparison analysis of monitoring data between power plants in the same area. Therefore, if the roof-type solar structure suitable for the small warehouse we have presented in this paper is used, the facilities of electric power generation is eco-friendly. Further it is easier to obtain facility certification compared to the BIPV, and improved capacity of the power generation can be secured at low material cost. It is believed that the roof-type solar power generation facility we proposed can be usefully used for warehouse or factory-based smart housing. Sensor devices for monitoring, CCTV monitoring, or safety and environment management, operating in connection with the solar power generation facilities, are linked with the Internet of Things (IoT) solution, so they can be monitored and controlled remotely.

• Journal of the Korean Society of Manufacturing Process Engineers
• /
• v.16 no.3
• /
• pp.1-8
• /
• 2017

Tool path generation is a part of process planning in 3D printing. This is done before actual printing by a computer rather than an AM machine. The mesh geometry of the 3D model is sliced layer-by-layer along the Z-axis and tool paths are generated from the sliced layers. Each 2-dimensional layer can have two types of printing paths: (i) shell and (ii) infill. Shell paths are made of offset loops. During shell generation, twists can be produced in offset loops which will cause twisted tool paths. As a twisted tool path cannot be printed, it is necessary to remove these twists during process planning. In this research, An algorithm is presented to remove twists from the offset loops. To do so the path segments are traversed to identify twisted points. Outer offset loops are represented in the counter-clockwise segment order and clockwise rotation for the inner offset loop to decide which twisted loop should be removed. After testing practical 3D models, the proposed algorithm is verified to use in tool path generation for 3D printing.

• Proceedings of the KIEE Conference
• /
• 2002.11d
• /
• pp.300-303
• /
• 2002

Combined generation system of Photovoltaic and wind generation have shortcoming that is different output power according to change of weather. So, the combined generation system is required backup system that such as a storage battery to supply energy, when not enough photovoltaic and wind power source for power supply equally and continually because the energy source is changeable and stable through change of weather as irradiation. temperature, wind speed. wind direction. seasons, etc.