• Journal of Animal Science and Technology
• /
• 제61권4호
• /
• pp.225-233
• /
• 2019

The aim of this study was to produce porcine tetraploid (4N) parthenogenetic embryos using various methods and evaluate their developmental potential. In method 1 (M1), porcine 4N parthenogenetic embryos were obtained by inhibiting extrusion of both first (PB1) and second (PB2) polar bodies; in methods 2 (M2) and 3 (M3), 4N parthenogenetic embryos were obtained by electrofusion of 2-cell stage diploid parthenogenetic embryos derived from inhibition of PB2 or PB1 extrusion, respectively. We found no differences in the rates of cleavage or blastocyst formation or the proportion of 4N embryos among M1, M2, and M3 groups. The different methods also did not influence apoptosis rates (number of TUNEL-positive cells/number of total cells) or expression levels of apoptosis-related BAX and BCL2L1 genes. However, total cell and EdU (5-ethynyl-2'-deoxyuridine)-positive cell numbers in 4N parthenogenetic blastocysts derived from M1 were higher (p < 0.05) than those for M2 and M3 groups. Our results suggest that, although porcine 4N parthenogenetic embryos could be produced by a variety of methods, inhibition of PB1 and PB2 extrusion (M1) is superior to electrofusion of 2-cell stage diploid parthenogenetic embryos derived from inhibition of PB2 (M2) or PB1 (M3) extrusion.

• 한국재료학회지
• /
• 제5권2호
• /
• pp.251-258
• /
• 1995

$Bi_{2}Te_{3}$와 PbTe의 혼합물에서 $Bi_{2}Te_{3}-PbBi_{4}Te_{7}$의 공정조직이 형성됨을 이용, 제2상의 미세조직 제어로 열전도도의 감소에 따른 성능지수 향상을 목적하여 여러 조건에서 제조된 n-type(Bi, Pb)-Te계 공정조성 일방향 응고재의 열전특성을 조사하였다. 일방향응고시 공정상 PbBi_{4}Te_{7}$이 $Bi_{2}Te_{3}$의 벽개면(0001)을 따라 lamellar 형태로 성장하였으며, 성장속도가 1.4 \times 10^{-4}$cm/sec에서 $8.3 \times 10^{-4}$cm/sec로 증가됨에 따라 4PbBi_[4]Te_{7}$의 상간격은 10.4 $\mu \textrm{m}$에서 3.2$\mu \textrm{m}$로 감소되었다. Seeback계수는 성장방향 및 성장속도와 온도구배에는 관계없이 약 $\mid$$\alpha$$\mid$=29 $\mu$ V/K일정하였다. 전기전도도는 성장속도에 따라 약간 감소하는 경향을 보였고 성장방향에 평행한 경우가 수직한 경우보다 약 3배 정도 컸다. 성능지수는 성장방향과 성장속도 및 온도구배에 따라 약간씩 변화를 보였다. 수직한 경우가 평행한 경우에 비해 상대적으로 증가하는 경향을 나타내었는데 이는 lamellar 간격이 줄어듦에 따른 열전도도의 감속에서 비롯된 것으로 분석되었다.

• 한국가구학회지
• /
• 제19권3호
• /
• pp.211-218
• /
• 2008

This experiment was carried out to investigate the effect of internal holes on the bending strength of PB. The diameters of holes are 0mm to 13mm. The locations of holes are 1/8 to 4/5 point horizontally from sample end and are 1/5 to 4/5 vertically from sample surface, the numbers of holes are 1 to 4 pcs. In the size of internal holes, the bending strengths of PB were decreased significantly with the increase of diameter of holes, and the relationship between diameters(D) of holes and bending strength (${\sigma}_b$) of PB was ${\sigma}_b=-11D+168.8$ ($r^2=-0.99^{**}$). The effects of hole-locations and hole-numbers on the bending strengths of PB were large. and so they should be considered as major factors for the jointing design of PB.

• JSTS:Journal of Semiconductor Technology and Science
• /
• 제9권2호
• /
• pp.117-123
• /
• 2009

$Pb_{x}Cd_{1-x}S$ films are prepared in the composition range of 0.05${\leq}x{\leq}$0.25, using a chemical bath deposition growth technique under optimum conditions amide at realizing good photo response. The x-ray diffraction results show that the films are of PbS-CdS composite with individual CdS and PbS planes. The films exhibit two direct band gaps, 2.4 eV attributed to CdS, while the other varies continuously from 2.4 eV to 1.3 eV. The films surface morphology is smooth with crystallite, whose grain size increases with increasing mole fraction (x). The decrease in band gap with increase in lead concentration suggests inter-metallic compound of PbS (Eg=0.41 eV) with CdS (Eg=2.4 eV)

• 한국전기전자재료학회논문지
• /
• 제16권1호
• /
• pp.19-25
• /
• 2003

Electromigration characteristics of eutectic SnPb solder were studied using thin stripe-type test structures. Significant changes in the microstructure were observed after electromigration test, in which the temperature and the current density were varied from 80 to 100 $^{\circ}C$ and from 4.6${\times}$10$^4$A/$\textrm{cm}^2$ to 8.7${\times}$10$^4$A/$\textrm{cm}^2$. While voids or local thinning were found near the cathode end, hillocks were mainly observed near the anode end. From resistance measurements, it was calculated that the activation energy of the eutectic SnPb solder for electromigration was 0.77 eV. The dominant migrating element along the electron flow at 100$^{\circ}C$ was Pb.

• E2M - 전기 전자와 첨단 소재
• /
• 제1권2호
• /
• pp.162-167
• /
• 1988

본 논문에서는 Pb(Sn$_{1}$7/Mn$_{2}$7/Nb$_{4}$7/)O$_{3}$- Pb(Zr, Ti)O$_{3}$계에 La$_{2}$O$_{3}$를 첨가하여 그양에 따른 압전일 전기력 성질의 변화를 고찰하였다. La$_{2}$O$_{3}$ 첨가량의 증가에 따라 유전상수, 압전 d상수, 유전손실, 비저항 등은 증가하였으나 경시 변화량은 오히려 감소하였다.

• 아시안잔디학회지
• /
• 제11권4호
• /
• pp.289-294
• /
• 1997

The cycles of heavy metals, mercury, lead and cadmium, were investigated on in dynamic grassland ecosystems at a steady state in Zoysia japonica and Miscanthus sinensis in Mt. Kwanak, Korea. Estimates of decay constants of heavy metals based on experimental and methomatical model, were Hg 0.14, Pb 0.17 and Cd 0.41 of Z. japonica grassland, and Hg 0.33, Pb 0.13 and Cd 0.56 of M sinensis grassland. The durations of reaching half of initial amounts in Z. japonica and M. sinensis grassland, were Hg 4.95, Pb 4.07 and Cd 1.69 years, and Hg 2.10, Pb 5.33 and Cd 1.24 years respectively. Times needed for 99% decomposed were longer in Z. japonica than M. sinensis grassland. Decay velocity of constituents of surface soil layers were more rapidly in M. sinensis than Z. japonica grassland. Key words: Cycles of heavy metals, Mercury, Lead, Cadmium, Zoysia japonica. Miscanthus sineusis, Mt. Kwanak, Decay constants.

• 한국초전도학회:학술대회논문집
• /
• 한국초전도학회 1999년도 High Temperature Superconductivity Vol.IX
• /
• pp.300-304
• /
• 1999

To tap the feasibility of exploiting the 2$^{nd}$ phases as flux-pinning centers in the (Bi,Pb)$_2Sr_2Ca_2CuO_{10}$ superconductor, the size and the distribution of the precipitates have been controlled by changing reaction temperature and time, oxygen partial pressure Po$_2$ and annealing condition. Various annealing heat treatments were also conducted on the as-received 61 filament Bi-2223 tapes with Bi$_{1.8}Pb_{0.4}Sr_2Ca_{2.2}Cu_3O_8$ starting composition and annealed specimen were analyzed with XRD, SEM, EDS and TEM.. The grain size of (Ca,Sr)$_2$(BiPb)O$_4$ or Bi$_{0.5}Pb_3Sr_2Ca_2CuO_{\delta}$ was controllable by optimizing the heat treatment condition and critical current density (J$_c$) showed dependence on the size of the 2$^{nd}$ phases.

• 한국결정성장학회지
• /
• 제2권2호
• /
• pp.40-52
• /
• 1992

Titanium-iso-propoxide[$Ti(OC_3H_7)_4$]와 Tetra-ethyl-lead $[Pb({C_2}{H_5})_4]$를 사용한 MOCVD법으로 PbTi$O_3$박막을 55$0^{\circ}C$에서 증착하였다. Ar과 $O_2$를 각각 운반 및 반응기체로 사용하였으며, 열처리에 따른 박막의 두께와 굴절지수의 변화, Xtjs 회절 분석, CV 특성 측정등을 행하였다. 열처리에 따른 CV 특성 측정 결과 PbTi$O_3$는 Si기판과 계면 반응을 하는 것으로 생각되며, X선 회절 분석 결과 $PbTiO_3$의 특성 peak들이 관찰되었다. 열처리 시간 및 온도의 증가에 따라 박막의 두께는 감소하고, 굴절지수는 증가하는 경향을 보여 주었다.

• 한국세라믹학회지
• /
• 제34권6호
• /
• pp.569-576
• /
• 1997

Electrically-induced strain and polarization studies of the (1-x)Pb(Mg1/3Nb2/3)O3-PbZrO3 crystalline solutions have been done. Dielectric constants with temperature were investigated for 0$\leq$x$\leq$0.95. With increasing PbZrO3 content the transition maxima were found to move to higher temperature region and DPT (Diffused Phase Transition) properties were decreased for x$\leq$0.60. Phase transition between ferroelectric states and antiferroelectric states was confirmed for 0.93$\times$10-3 for 0.4