• 한국전기전자재료학회:학술대회논문집
• /
• 한국전기전자재료학회 2001년도 춘계학술대회 논문집 유기절연재료 전자세라믹 방전플라즈마 연구회
• /
• pp.131-134
• /
• 2001

In this paper, the piezoelectric and dielectric properties as a function of x and a in $aPbZr_xTi_{1-x}O_3-(1-a)Pb(Mn_{1/3}Nb_{2/3})O_3$ + ywt%MgO is investigated. As a results, when a is 0.95 and x is 0.505, electromechanical coupling factor$(k_p)$, permittivity${\varepsilon}_33^T/{\varepsilon}_0$, piezoelectric strain constant$(d_{33})$ and mechanical quality factor$(Q_m)$ are 58 %, 1520, 272 pC/N and 1550, respectively. From XRD analysis, when x is 0.505, it is MPB which present rhombohedral and tetragonal phase in same quantity. Also, From SEM observation, when sintering temperature is $1150^{\circ}C$, grain size is about $2\;{\mu}m$. As a results added MgO dopant in the ternary piezoelectric ceramic, when MgO content is 0.1 wt%, $k_p$ increases to 63[%].

• 한국전기전자재료학회:학술대회논문집
• /
• 한국전기전자재료학회 2003년도 추계학술대회 논문집 Vol.16
• /
• pp.594-597
• /
• 2003

In the present study, the piezoelectricity and polarization of multilayer ceramic actuator, being designed to stack PMN-PZ-PT ceramic layers and Ag-Pd electrode layers alternatively, were investigated under a consideration of geometric factor, the volume ratio of the ceramic to the electrode layers. The actuators were fabricated by tape casting of 0.2Pb(Mg1/3Nb2/3)O3-0.38PbZrO3-0.42PbTiO3 followed by lamination and burnout & co-firing processes. The actuators of 10 10 0.62 nm3 in size were formed in a way that 60 200 m thick ceramics were stacked alternatively with 5 m thick electrode layer. Increases in polarization and electric field-induced displacement with thickness of the ceramic layer were attributed to change of 90o/180o domain ratio, which was affected by interlayer internal stress. The piezoelectricity and actuation behaviors were found to depend upon the volume ratio (or thickness ratio) of ceramic to electrode layers.

• 한국세라믹학회지
• /
• 제39권9호
• /
• pp.846-850
• /
• 2002

강유전체 물질인 PMN-PT-BT의 기계적 특성을 향상시키기 위한 Ag와의 복합체 제조를 MgO 졸로 분말 표면을 코팅하여 소결시 Ag의 이동을 제어하는 방법으로 시도하였다. PbO, $Nb_2O_5,\;TiO_2,\;BaCO_3$와 MgO 대신 $Mg(NO_3)_2$을 사용하여 볼밀로 혼합한 후, 건조된 분말을 950$^{\circ}C$/1h 열처리하여, 단일 페로브스카이트 상을 얻었다. 이 분말에 3.0 몰%의 $Ag_2O$을 혼합한 후, 550$^{\circ}C$/1h 열처리로 Ag 입자를 생성시키고, 이 혼합 분말에 1.0wt%의 MgO 졸을 첨가한 다음 550$^{\circ}C$/1h 열처리하여 표면 개질된 분말을 얻었다. 이 분말을 산소 분위기에서 1000$^{\circ}C$/4h 열처리한 소결체는 소결 밀도 7.84/$cm^3$, 실온 유전율 18400, 유전손실 2.4%, 비저항 $0.24{\times}10^{12}{\Omega}{\cdot}cm$의 수한 유전 특성과 굽힘강도 $120.7{\pm}11.26$ MPa와 파괴인성 $0.87{\pm}0.002\;MPam^{1/2}$을 보여 주었다. 결정립의 크기는 ∼4${\mu}m$이며, SEM과 SIMS 분석은 Ag는 ∼1${\mu}m$ 크기로, 과잉의 MgO는 ∼0.5${\mu}m$로 분포되어 있음을 알 수 있었다.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 1996년도 하계학술대회 논문집 C
• /
• pp.1621-1623
• /
• 1996

The dielectric and polarizable properties of 0.85Pb$Mg_{1/3}Nb_{2/3}$)$O_3$-$0.125PbTiO_3$-$0.25BaTiO_3$ Ceramics have been investigated as a addition of the amount of $La_{2}O_{3}$($0{\leq}x{\geq}0.05$). The Temperature-dependant electrostictive characteristics of 0.85PMN-0.125PT-0.25BT relaxor ferroelectic system were improved by enhencing the extent of the diffuse phase transition(DPT). This was achieved using PMN-PT-BTceramics by the partial substitution of La at the Pb site. The curie temperature and the maximum dielectic permittivity decreased by substituting $La_{2}O_{3}$ and the electic field-related hysteresis phenomena decreased with increasing $La_{2}O_{3}$ substitution amount. It is showed decreasing in induced strain for electric field with increasing $La_{2}O_{3}$ substitution.

• 암석학회지
• /
• 제27권1호
• /
• pp.37-47
• /
• 2018

백두산에서 역사시대에 분화한 화산재의 시료에 대하여 다양한 방법으로 주성분과 미량성분을 분석하였다. 화산재의 주성분 원소 함량은 $SiO_2$ 58.8~71.1 wt.%, $Al_2O_3$ 9.6~16.8 wt.%, ${Fe_2O_3}^T$ 4.5~6.9 wt.%, MgO 0.1~1.7 wt.%, CaO 0.3~1.6 wt.%, $Na_2O$ 5.2~6.3 wt.%, $K_2O$ 4.3~5.9 wt.% 그리고 $TiO_2$ 1.2 wt.%이하로 분석되었다. Ba, Cu, Cr. Co, Ni, Sr, V, Zn와 Zr을 포함하는 32개 미량원소가 분석되었는데, 이들 화산재는 일부 미량원소와 경희토류 원소의 부화정도에 따라 두 그룹(그룹 A, 그룹 B)으로 구분되며, 그룹 A에는 1천년 전의 밀레니엄 분화물, 1668년과 1903년 분화물이, 그룹 B에는 1702년 분화물이 해당된다. 중금속원소인 Cu, Co, Zn, Mn 등은 소량 함유되어 나타난다. 백두산 화산재는, 섭입대 기원의 일본 사쿠라지마 화산의 화산재와 비교하여, 미량성분원소 중 Y, Nb, Pb, U, Sc, V, Ni 그리고 Cu 함량은 낮게 나타나며, Zr, Ba, Hf, Cr, Co, Zn 그리고 희토류(Eu제외) 등은 높은 함량을 나타낸다.

• 한국전기전자재료학회:학술대회논문집
• /
• 한국전기전자재료학회 2009년도 추계학술대회 논문집
• /
• pp.85-85
• /
• 2009

본 연구에서는 압전 세라믹과 고분자를 혼합한 복합체를 제작하고 이러한 재료로부터 발생될 수 있는 미소 전력량을 조사하였다. 압전 세라믹으로는 0.2(PbMg1/3Nb2/3O3)-0.8(PbZr0.475Ti0.525O3)와 고분자는 PVPF-TrFE (6:4)를 사용하였다. 고분자와 압전 세라믹 분율을 1%, 5%, 10%, 30%, 50%로 변화하였으며, 구조는 0-3 복합재료 및 1-3 재료를 제작하였다. 제작한 결과 0.3 복합재료에서는 분율이 10%에서 가장 큰 전력량이 발생되었고, 1-3 복합재료에서는 분율이 30%에서 최대 값을 나타내었다. 이러한 결과들을 간단한 식을 이용하여 분석을 하였다.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 1994년도 추계학술대회 논문집 학회본부
• /
• pp.196-198
• /
• 1994

The dielectric and electrical properties of $Pb(Mg_{1/3}Nb_{2\3})O_3-PbTiO_3-BaTiO_3$ have been investigated. Perovskite crystalline phase of the specimens are confirmed by XRD at $1270^{\circ}C$. The curie temperature is around $40^{\circ}C$ with the amount of $BaTiO_3$ and $PbTiO_3$. Every specimens shows the slim loop hysteresis curves which is electrostrictive characteristic. The strain vs. applied voltage characteristics exhibits nonlinear relationship, and the specimen of 0.85PMN-0.125PT-0.025BT shows the largest strain.

• 한국전기전자재료학회:학술대회논문집
• /
• 한국전기전자재료학회 2005년도 하계학술대회 논문집 Vol.6
• /
• pp.68-69
• /
• 2005

Low temperature ($\leq900^{\circ}C$) sintering piezoelectric ceramics $0.01Pb(Mg_{1/2}W_{1/2})O_3$-0.41Pb$(Ni_{1/3}Nb_{2/3})O_3-0.35PbTiO_3-0.23PbZrO_3+0.1wt%Y_2O_3+xwt%ZnO$ $(0{\leq}x{\leq}2.5)$ have been developed and investigated. The electromechanical coupling coefficient ($k_p$), piezoelectric constant ($d_{33}$), and mechanical quality factor ($Q_m$) have been measured to characterize the piezoelectric materials system. When 2.0 wt% ZnO is added, the properties of the system, $d_{33}$ = 559 pC/N, $k_p$ = 55.0 % and $Q_m$ = 73.4 are obtained which are very suitable for piezoelectric actuators. A bending mode multilayer actuator has been also developed using the materials which size is $27(L)\times9(W)\times1.07(t)mm^3$. The actuators are fabricated by multilayer ceramic (MLC) process and consist of24 layers and each layer thickness is $35{\mu}m$. At this time, the displacement of actuator was $100{\mu}m$ at 28V.

• 한국전기전자재료학회논문지
• /
• 제13권11호
• /
• pp.921-925
• /
• 2000

Characteristics of Pb(Mg, Nb)O$_3$-Pb(Zr, Ti)O$_3$system thick films fabricated by a screen printing method were investigated. The buffer layer were coated with various thickness of Ag-Pd by screen printing to investigate the effect as a diffusion barrier and deposited Pt as a electrode by sputtering on Ag-Pb layer. The printed thick films were burned out at 650$\^{C}$ and sintered at 950$\^{C}$ in O$_2$condition for each 20, 60min after printing with 350mesh screen. The thickness of piezoelectric thick film was 15∼20㎛ and Ag-Pb layer acted as a diffusion barrier above 3㎛ thickness. The PMN-PZT thick films were screen printed on Pt/Ag-Pb(6m) and sintered by 2nd step (650$\^{C}$/20min and 950$\^{C}$/1h) using paste mixed PMN-PZT and binder in the ratio of 70:30, and the remnant polarization of thick film was 9.1$\mu$C/㎠ in this conditions.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 1991년도 추계학술대회 논문집 학회본부
• /
• pp.293-295
• /
• 1991

In this study, we investigated the possibilty that $Pb(Mg_{1/3}Nb_{2/3})O_3-PbTiO_3-PbZrO_3$ ceramics with strontium substitutions could be used for piezoelectric sounders. Piezoelectric buzzer is one of them. By partially substituting Sr for Ph, dielectric constants had values greater than 2000, the value proper piezoelectric buzzer, piezoelectric constant($d_{31}$) had a maximum value, 298 $[10^{-12}C/N]$, at the Sr 5 mol % substitution. Sound level of piezoelectric buzzer had the highest value of 91 dB at the Sr 5 mol % substitution.