• Asian-Australasian Journal of Animal Sciences
• /
• 제28권1호
• /
• pp.50-57
• /
• 2015

This study was conducted to investigate the effect of soybean meal (SM) and soluble starch (SS) on biogenic amine production and microbial diversity using in vitro ruminal fermentation. Treatments comprised of incubation of 2 g of mixture (expressed as 10 parts) containing different ratios of SM to SS as: 0:0, 10:0, 7:3, 5:5, 3:7, or 0:10. In vitro ruminal fermentation parameters were determined at 0, 12, 24, and 48 h of incubation while the biogenic amine and microbial diversity were determined at 48 h of incubation. Treatment with highest proportion of SM had higher (p<0.05) gas production than those with higher proportions of SS. Samples with higher proportion of SS resulted in lower pH than those with higher proportion of SM after 48 h of incubation. The largest change in $NH_3$-N concentration from 0 to 48 h was observed on all SM while the smallest was observed on exclusive SS. Similarly, exclusive SS had the lowest $NH_3$-N concentration among all groups after 24 h of incubation. Increasing methane ($CH_4$) concentrations were observed with time, and $CH_4$ concentrations were higher (p<0.05) with greater proportions of SM than SS. Balanced proportion of SM and SS had the highest (p<0.05) total volatile fatty acid (TVFA) while propionate was found highest in higher proportion of SS. Moreover, biogenic amine (BA) was higher (p<0.05) in samples containing greater proportions of SM. Histamines, amine index and total amines were highest in exclusive SM followed in sequence mixtures with increasing proportion of SS (and lowered proportion of SM) at 48 h of incubation. Nine dominant bands were identified by denaturing gradient gel electrophoresis (DGGE) and their identity ranged from 87% to 100% which were mostly isolated from rumen and feces. Bands R2 (uncultured bacterium clone RB-5E1) and R4 (uncultured rumen bacterium clone L7A_C10) bands were found in samples with higher proportions of SM while R3 (uncultured Firmicutes bacterium clone NI_52), R7 (Selenomonas sp. MCB2), R8 (Selenomonas ruminantium gene) and R9 (Selenomonas ruminantium strain LongY6) were found in samples with higher proportions of SS. Different feed ratios affect rumen fermentation in terms of pH, $NH_3$-N, $CH_4$, BA, volatile fatty acid and other metabolite concentrations and microbial diversity. Balanced protein and carbohydrate ratios are needed for rumen fermentation.

• 자원환경지질
• /
• 제42권2호
• /
• pp.121-131
• /
• 2009

폐기물 해양 투기 지역인 동해병과 서해병 해역 표층퇴적물의 입도, 광물학적 특성, 퇴적속도 및 중금속 함량을 분석하여 중금속 분포 특성을 비교하였다. 동해병과 서해병 해역의 입도는 각각 $7.95{\sim}8.51{\Phi}$와 $7.42{\sim}8.15{\Phi}$의 범위이며, 동해병 해역의 일부 정점을 제외한 모든 정점의 퇴적상은 니질 퇴적물에 속한다 연구지역 표층퇴적물의 주 구성 점토광물은 일라이트이며, 카올린 계열 광물과 녹니석, 스멕타이트로 소량 구성되어 있다. $^{210}Pb$에 의해 추정된 동해병해역 표층퇴적물의 퇴적속도는 1.11 mm/yr$\sim$1.73 mm/yr이며, 서해병해역 퇴적물의 퇴적속도는 1.87 mm/yr이다. 상관성 분석 결과, 니켈, 구리, 크롬 및 아연은 평균입도, 알루미늄 및 철과 밀접한 상관성을 보인다. 반면, 연구지역 퇴적물의 카드뮴과 납은 이들 요소들과 상관성이 결여되어 있을 뿐만 아니라, 부화지수가 1.5이상으로 인위적인 오염의 징후를 보인다. 그리고 카드뮴과 납의 $I_{geo}$-class 역시 대부분 $2{\sim}4$로 moderately polluted$\sim$strongly polluted로 분류된다. 특히, 동해병의 $I_{geo}$-class가 최대 4인 strongly polluted로 분류되어 서해병 해역보다 높다. 이는 동해병 해역에 투기되는 폐기물이 서해병 해역에 투기되는 폐기물뿐만 아니라, 광물성폐기물, 하수도준설토사, 건설공사 오니 등이 추가로 배출되고 있으며, 양적으로도 서해병 보다 두 배 이상 투여되기 때문인 것으로 판단된다.

• 대한치과보철학회지
• /
• 제50권4호
• /
• pp.235-242
• /
• 2012

연구 목적: 본 연구는 지르코니아, 유리침투알루미나 및 금속도재소부용치관의 파절강도를 비교하고자 하였다. 연구 재료 및 방법: 지르코니아, 유리침투알루미나 및 금속도재소부용합금으로 각각 15개의 치관을 제작한 후, 제작된 치관을 장축에 $30^{\circ}$ 경사지게 제작된 지그에 장착하여 만능시험기로 파절강도를 측정하였으며, 전단결합강도 시험을 위하여 지르코니아, 유리침투알루미나 및 금속도재소부용합금을 $5.5({\phi}){\times}2.5mm$ 크기로 제작하고 포세린 분말을 $3.5({\phi}){\times}2.5mm$ 크기로 축성한 후 제조사의 설명서에 따라 전기로(Ceramco 7, Dentsply, USA)에서 소결하여 총10개의 시편을 제작하였다. 결과: 전부관 형태로 제작한 시편의 파절강도는 금속-도재 시스템이 $569.1{\pm}61.8N$, 알루미나-도재 시스템이 $551.0{\pm}76.5N$ 및 지르코니아-도재 시스템이 $588.3{\pm}49.6N$으로 측정되었으며, 각 실험군간 유의한 차이는 없었다(P>.05). 전단결합강도는 금속-도재 시스템이 $38.9{\pm}5.0MPa$, 알루미나-도재 시스템이 $39.4{\pm}5.1MPa$, 지르코니아-도재 시스템이 $25.5{\pm}5.6MPa$로 지르코니아-도재 시스템이 다른 두 시스템 보다 유의하게 낮은 값을 보였다(P<.05). 금속-도재 시스템, 알루미나-도재 시스템 및 지르코니아-도재 시스템의 각 결합계면을 SEM/EDS로 분석한 결과 각 시스템에서 상이한 결합 양상이 관찰되었다. 결론: 본 연구 결과 지르코니아-도재 시스템의 파절강도가 제일 높았으며, 금속-도재 시스템, 알루미나-도재 시스템 순서로 나타났으며, 전단결합강도는 알루미나-도재 시스템이 제일 높았고 금속-도재 시스템, 지르코니아-도재 시스템 순서으로 나타났다.

• 한국미생물·생명공학회지
• /
• 제44권3호
• /
• pp.355-362
• /
• 2016

수해양성 병원성 미생물로 알려진 Vibrio anguillarum으로부터 mannose-1-phosphate를 mannose-6-phosphate, glucose-1-phosphate를 glucose-6-phosphate로 가역적으로 변환시키는 phosphomannomutase/phosphoglucomutase (pmm/pgm)의 유전자를 sequencing하여 1338 bp의 open reading frame (ORF)을 밝혔다. 이는 446개의 아미노산을 포함하며 47,625 Da을 가지고 있다. 보고된 다른 Vibrio sp.의 pmm/pgm 유전자와 상동성을 비교하였을 때 V. mimicus V. vulnificus, V. splendidus, V. harveyi와 92.3%, 91.4%, 89.9%, 89.9%에 해당하는 상동성을 지니고 있었다. 증폭된 목적 유전자를 pET-28a(+) vector에 연결하여 대장균에서 단백질의 대량발현을 유도하였으며 이는 주로 soluble한 상태로 나왔다. Soluble fraction을 Ni-NTA column chromatography로 정제하여 약 50 kDa의 단백질을 얻었고 이는 주로 mannose-1-phosphate를 이용하는 효소로 확인되었으며 Mg²⁺ 이온이 존재할 때 효소의 활성이 나타나는 것을 확인할 수 있었다. 본 연구의 유전자는 낮은 온도의 stress하에서 발현이 증가됨을 Reverse Transcriptase-Polymerase Chain Reaction (RT-PCR)을 통해 확인하였고, 상동성 재조합 (homologous recombination)에 의한 돌연변이 균주 제작을 통해 PMM/PGM protein과 lipopolysaccharide (LPS)의 생합성과의 관계를 규명하였다. V. anguillarum wild type과 mutant로부터 LPS를 분리하였고 sodium dodecyl sulfate polyacrylamide gel electrophoresis (SDS-PAGE)후 silver staining을 통해 LPS의 high molecular weight (HMW) 부분인 O-antigen에서의 변화를 확인하였다. 또한 V. anguillarum wild type과 mutant의 growth와 viability를 확인한 결과 mutant가 wild type보다 정지기까지 더 낮은 생육을 보였으며 viability가 감소함을 확인하였다. 본 연구를 통하여 V. anguillarum의 pmm/pgm 유전자가 미생물의 생육과 LPS 생합성에 관여하고 있음을 알 수 있었다.

• 디자인학연구
• /
• 제2권1호
• /
• pp.43-62
• /
• 1989

The luxury is the expression of human being's ornament instinct. In this study, in order to grasp the moulding system of the Korean's personal ornaments, the process of luxury prohibition was reviewed to search for to which direction the ornaments developed in the frame of the prohibited style connected closely to the character of the personal ornaments. The proiod was fixed from the old society to the late Chosun dynasty era. The beginning of the luxury in Korea seems to be the start of the luxury burial at the time of funeral in the age of Koguryo., In the era of Koguryo, 10th year of King Dongmyung (B. C. 28), in the era of Baekje, 27th year of King Koi(260), the prohibition of dress regulation and the style of dress were conducted. The prohibition of personal ornaments in Silla was started from King Bup:Heung, and in the 9th year of King Heung-Duk, the prohibition was conducted in order to correct the luxury of the nobles and set up the social discipline. In the 11 th of King Il-Sung-Ni-Sa-Kum, the use of gold, silver and jade was prohibited in the civilian circles. The prohibition of Silla was succeeded to Koryo era, and in the 7th year of King Kwangjong(956), the system of Baekgwan Gongbok(uniform for government officials) was set up, and the system of Sasek Gongbok(four color official uniform) was set up in the 11 th year of the same King, and the prohibition of the personal ornaments such as crown and band is considred to have been conducted. The prohibition of gold and silver was conducted in the first year of King Sungjong(982), and in the 4th year of King Chungryul(l260), the order of wearing the dress and hat in accordance with the Yusan dynasty and the Mongolian customs were widely circulated in the royal court and vivilian circles. The strong influence of Mongolia made the taste of the traditional personal ornaments laste. The personal ornaments were used for the nobles until the age of the Unified Sillar but even the common people could use them in case they were rich, and such a circumstances made the use of foreign goods inflated. The prohibition of Koryo era was aimed at the prohibition of the foreign goods of luxury, and the classification of the social status.In the age of Chosun Dynasty, the production of gold and silver was feeble indeed but the oute reason of the prohibition was to eradicate the luxurious tendency, elevate the custom of eradicate the luxurious tendency, elevate the custom of thrift, and moreover, the gold, silver and jade were no the products of Korea and the prohibition was conducted but the true reason was afor the tribute tt China and the classification of status. The prohibition of Chosun dynasty was conducted first in the June of the 3rd year of King Taejo The major contents of prohibition was no use of gold, silver and jade, coral, agate, amber, etc. of th, wives of the Dang-Sang-Kwan (Court Nobleman) or their sons and daughters, and the same pheno menon was common even at the time of marriage. The people engaged in the secret trade there of wert beheaded. The personal ornaments in the prohibition were the pendent trinket, Binyo (crossbar) ceremonial ornamental hat, ring, earring, ornamental knife, hat string, hat ornament, belt, etc. Thl luxurious marriage expenses out of the luxury was severe, and lose of the marriageable age because 0 non-preparing the marriage goods was the national evil. The prohibition oC luxury was hard to bt kept to the nobles or rich people, the same as old days and present days. The prohibition of th{ luxury and personal ornaments of Korea had nothing to do with the commons, and it was limited tc the nobles and rich people. The prohibition was aimed to cultivating the custom of frugality by eradicating the luxurious atmosphere, but it was chiefly due to the tribute to the China and tht discrimination of the. status. We can say that the recent personal ornament was the flower of handi craft industry bloomed in the prohibition and regulation.

• 한국식품위생안전성학회지
• /
• 제26권3호
• /
• pp.273-282
• /
• 2011

본 연구는 파프리카 GAP 모델의 개발에 있어 기초자료를 제공하기 위해 서부경남에 소재한 파프리카 농장 3곳을 선정하여 파프리카의 재배단계에서 생물학적, 화학적 및 물리적 위해요소를 조사하였다. 생물학적 위해요소는 식물체, 재배환경, 개인위생 및 작업도구를 대상으로 위생지표세균 및 주요 병원성 미생물을 조사하였으며, 화학적 위해요소는 중금속 (재배환경 및 파프리카)과 잔류농약 (파프리카), 물리적 위해요소는 물리적인 위해를 줄 수 있는 요인을 조사하였다. 먼저 재배단계에서 생물학적 위해요소 분석 결과 위생지표에서 균인 일반세균과 대장균군의 경우 가식부인 파프리카에의 오염과 밀접한 관련이 있는 양액 및 원수에 대해서는 오염도가 양호한 것으로 나타났으나, 수확 된 파프리카와 직접적으로 접촉하는 바구니, 천막 및 작업자의 손 등에서는 최대 6.6 및 3.l log CFU의 높은 수준으로 검출되어 교차오염의 가능성이 확인되었다. 또한 병원성 미생물은 B. cereus만 1.5 log CFU 이하의 비교적 낮은 수준으로 검출되었고, 공중낙하균은 1.4 log CFU 이하로 검출되었다. 화학적 위해요소인 중금속(Cd, Pb, Cu, Cr, Zn, Ni 및 As)과 잔류농약은 재배환경 및 파프리카에서 모두 국내 허용기준치 이하로 검출되었고, 물리적 위해요소는 유리조각, 캔 등의 일반쓰레기나 경작지 폐기물 등으로 다른 위해요소들에 비해 위험도는 상대적으로 낮으나 경우에 따라서 위해를 일으킬 수 있으므로 관리가 필요할 것으로 판단된다. 결론적으로 파프리카의 재배단계에서 생물학적 위해요소의 경우 작업도구 및 개인위생에서 대장균군이 높은 수준으로 검출됨에 따라 파프리카로의 교차오염을 예방하기 위한 체계적인 관리방안이 모색되어야 할 것으로 판단된다. 또한 화학적 및 물리적 위해요소의 경우 본 연구에서는 허용기준치 이하로 농약과 중금속이 검출되고 위해가 큰 이물이 발견되지 않아 안전한 것으로 나타났으나, 농약안전사용기준의 준수 및 재배환경에 대한 주기적인 검사 등은 필히 요구된다.

• 한국환경과학회:학술대회논문집
• /
• 한국환경과학회 1998년도 가을 학술발표회 프로그램
• /
• pp.2-4
• /
• 1998

Proliferation of Nocardia amarae cells in activated sludge has often been associated with the generation of nuisance foams. Despite intense research activities in recent years to examine the causes and control of Nocardia foaming in activated sludge, the foaming continued to persist throughout the activated sludge treatment plants in United States. In addition to causing various operational problems to treatment processes, the presence of Nocardia may have secondary effects on the fate of heavy metals that are not well known. For example, for treatment plants facing more stringent metal removal requirements, potential metal removal by Nocardia cells in foaming activated sludge would be a welcome secondary effect. In contrast, with new viosolid disposal regulations in place (Code o( Federal Regulation No. 503), higher concentration of metals in biosolids from foaming activated sludge could create management problems. The goal of this research was to investigate the metal sorption property of Nocardia amarae cells grown in batch reactors and in chemostat reactors. Specific surface area and metal sorption characteristics of N. amarae cells harvested at various growth stages were compared. Three metals examined in this study were copper, cadmium and nickel. Nocardia amarae strain (SRWTP isolate) used in this study was obtained from the University of California at Berkeley. The pure culture was grown in 4L batch reactor containing mineral salt medium with sodium acetate as the sole carbon source. In order to quantify the sorption of heavy metal ions to N amarae cell surfaces, cells from the batch reactor were harvested, washed, and suspended in 30mL centrifuge tubes. Metal sorption studies were conducted at pH 7.0 and ionlc strength of 10-2M. The sorption Isotherm showed that the cells harvested from the stationary and endogenous growth phase exhibited significantly higher metal sorption capacity than the cells from the exponential phase. The sequence of preferential uptake of metals by N. amarae cells was Cu>Cd>Ni. The specific surFace area of Nocardia cells was determined by a dye adsorption method. N.amarae cells growing at ewponential phase had significantly less specific surface area than that of stationary phase, indicating that the lower metal sorption capacity of Nocardia cells growing at exponential phase may be due to the lower specific surface area. The growth conditions of Nocardia cells in continuous culture affect their cell surface properties, thereby governing the adsorption capacity of heavy metal. The comparison of dye sorption isotherms for Nocardia cells growing at various growth rates revealed that the cell surface area increased with increasing sludge age, indicating that the cell surface area is highly dependent on the steady-state growth rate. The highest specific surface area of 199m21g was obtained from N.amarae cell harvested at 0.33 day-1 of growth rate. This result suggests that growth condition not only alters the structure of Nocardia cell wall but also affects the surface area, thus yielding more binding sites of metal removal. After reaching the steady-state condition at dilution rate, metal adsorption isotherms were used to determine the equilibrium distributions of metals between aqueous and Nocardia cell surfaces. The metal sorption capacity of Nocardia biomass harvested from 0.33 day-1 of growth rate was significantly higher than that of cells harvested from 0.5- and 1-day-1 operation, indicatng that N.amarae cells with a lower growth rate have higher sorpion capacity. This result was in close agreement with the trend observed from the batch study. To evaluate the effect of Nocardia cells on the metal binding capacity of activated sludge, specific surface area and metal sorption capacity of the mixture of Nocardia pure cultures and activated sludge biomass were determined by a series of batch experiments. The higher levels of Nocardia cells in the Nocardia-activated sludge samples resulted in the higher specific surface area, explaining the higher metal sorption sites by the mixed luquor samples containing greater amounts on Nocardia cells. The effect of Nocardia cells on the metal sorption capacity of activated sludge was evaluated by spiking an activated sludge sample with various amounts of pre culture Nocardia cells. The results of the Langmuir isotherm model fitted to the metal sorption by various mixtures of Nocardia and activated sludge indicated that the mixture containing higher Nocardia levels had higher metal adsorption capacity than the mixture containing lower Nocardia levels. At Nocardia levels above 100mg/g VSS, the metal sorption capacity of activate sludge increased proportionally with the amount of Noeardia cells present in the mixed liquor, indicating that the presence of Nocardia may increase the viosorption capacity of activated sludge.

• Journal of the Korean Academy of Child and Adolescent Psychiatry
• /
• 제21권2호
• /
• pp.63-71
• /
• 2010

Objectives : The aim of this study was to investigate the effect of the clinical and demographic variables such as body weight, dosage, family history of attention-deficit hyperactivity disorder (ADHD), and psychiatric co-morbidity on the side-effects of OROS-Methylphenidate (OROS-MPH), and to evaluate the relationship between drug response and side effect severity. Methods : A total of 144 children (ages 6-18) with diagnosed ADHD were treated with OROS-MPH. Children were examined at baseline and after 1, 3, 6, 9, and 12 weeks of each treatment condition. The stimulant drug side effect rating scale (SERS), pulse rate, systolic blood pressure, diastolic blood pressure, and electrocardiogram (ECG) were evaluated to assess side effect profiles. Changes in these parameters from baseline were examined and analyzed. Results : Anorexia (30.95%) and insomnia (13.10%) were the most commonly reported side effects during this study. Insomnia and loss of appetite score increased at one week follow-up, but was sustained or decreased as treatment progressed. Small but significant increases in pulse rate and diastolic blood pressure were observed during treatment ; however, no clinically meaningful changes in ECG parameters were noted during the study. Low body weight, high dosage of OROS-MPH, and family history of ADHD were associated with cardiovascular side effect. In contrast, there was no significant relationship between OROS-MPH treatment response and the severity of side effect and no difference resulted between the responder and non-responder groups with respect to OROS-MPH dosage in the 12 weeks of follow-up. Conclusion : To the best of our knowledge, this study is the first Korean study to investigate comprehensive side effect profiles and their correlates in OROS-MPH treatment for ADHD children. OROS-MPH was well tolerated with no clinically significant side effects during the treatment period. In conclusion, low body weight, high dosage of OROSMPH, and family history of ADHD could be used as predictive factors in increasing pulse rate and blood pressure.

• Restorative Dentistry and Endodontics
• /
• 제25권3호
• /
• pp.390-398
• /
• 2000

근관형성을 위해 표준화된 근관형성기구에 비해 taper가 큰 기구들이 사용되고 있으며 이를 이용하여 형성된 근관은 taper가 큰 근관의 모양을 갖는다. 근관충전방법에 있어 근관의 크기에 적합한 1차적 gutta-percha cone을 선택할 필요가 있다. 본 연구에서는 .04 및 .06 taper의 전동화일로 형성된 근관에 열연화충전법을 위해 가장 적합한 1차 cone을 선택하기 위한 지침 마련의 목적으로, 근단공의 크기와 근관의 taper에 따른 gutta-percha cone의 근단부 근관 내 적 합도를 평가하였다. ProFile$^{(R)}$ .04 taper와 .06 taper를 이용하여 Crown down 방법으로 60개의 모형근관을 형성하였다. 표준화 gutta-percha cone, Dia-Pro ISO-.04$^{TM}$ 및 .06 gutta-percha cone, MF, F, FM 및 M 크기의 비표준화 gutta-percha cone의 근관 내 적합도는 치근단 5mm의 근관면적에 대한 gutta-percha cone의 점유 면적비(%)로 하였다. .04 taper, 25번 크기의 근관에서는 F, MF 크기의 비표준화 cone이 표준화 cone과 Dia-Pro 180-.04$^{TM}$ 보다 우수한 근관적합도를 나타내었고(p<0.05), 30번 크기의 근관에서는 F, Dia-Pro ISO-.04$^{TM}$, FM 크기의 gutta-percha cone 모두 표준화 cone보다 우수한 근관적합도를 나타내었으나(p<0.05), 35번 크기의 근관에서는 모든 gutta-percha cone 사이에 유의한 차이를 나타내지 않았다(p>0.05) .06 taper, 25번 크기의 근관에서는 사용된 비표준화 cone 모두가 표준화 cone, Dia-Pro ISO-.06$^{TM}$ 보다 나은 근관적합도를 나타내었고(P<0.05), 30번 크기의 근관에서는 표준화 cone을 제외한 나머지 gutta-percha cone에서 유의한 차이를 발견할 수 없었다. 35번 크기의 근관에는 M 크기의 비표준화 cone이 가장 우수한 근관적합도를 보이고 있는 것으로 나타났으며, FM과 Dia-Pro ISO-.06$^{TM}$ 사이에서는 유의한 차이가 나타나지 않았다(p>0.05).