• The Korean Journal of Food And Nutrition
• /
• v.35 no.4
• /
• pp.247-252
• /
• 2022

To improve the shelf-life of Centella asiatica, Centella asiatica was treated with gel packs containing slow-released chlorine dioxide (ClO₂) gas at 3-5 ppm for 20 days at 4℃. The weight loss rate, as well as the changes in pH, color, and texture of the treated samples, were investigated. The weight of the control and ClO₂ gas-treated samples was decreased during the storage period. The change in weight of the control was slightly faster than that of the samples treated with 3 and 4 ppm ClO₂ gas. The pH of the control and the ClO₂ gas treated samples were decreased during the storage period and there was no significant difference between the control and ClO₂ gas treated samples. Concerning color (lightness, redness, and yellowness) changes of Centella asiatica during the storage period, there was no significant difference between the control and ClO₂ gas treated samples. The change in shear force in the leaf and stem of Centella asiatica during the storage period was slightly lower in the 4 ppm ClO₂ gas treated samples (in the leaf) compared to the control and 3 and 4 ppm ClO₂ gas treated samples (in the stem) compared to the control and 5 ppm ClO₂ gas treated sample.

• Journal of Sensor Science and Technology
• /
• v.15 no.1
• /
• pp.13-19
• /
• 2006

The micro-gas sensor based on carbon nanotubes (CNTs) was fabricated and its gas sensing characteristics on nitrogen dioxide ($NO_{2}$) have been investigated. The sensor consists of a heater, an insulating layer, a pair of contact electrodes, and CNT-sensing film on a micromachined diaphragm. The heater plays a role in the temperature change to modify sensor operation. Gas sensor responses of CNT-film to $NO_{2}$ at room temperature are reported. The sensor exhibits a reversible response with a time constant of a few minutes at thermal treatment temperature of $130^{\circ}C$.

• Korean Journal of Organic Agriculture
• /
• v.8 no.2
• /
• pp.89-96
• /
• 2000

To reduce loss of nitrogen and generation of ammonia gas during composting, poultry manure and sawdust were mixed at the equivalent ratio and calcium chloride, fused superphosphate and vermiculite were added. Ammonia and sulfurous gas during composting, and NH4-N and NO3-N contents of composts were periodically measured. With the treatments of 0.5∼3% calcium chloride and 3% fused superphosphate, ammonia and sulfurous gas during composting significantly decreased, and especially generation of gases sharply reduced and a increase of calcium chlorde. Extractable NH4-N content in composts treasted with calcium chloride and fused superphosphate were high but extractable NO3-N markedly decreased. In conclusion, the results suggest that it is necessary the additon of 1∼3% calcium chloride or 3% fused superphosphate to reduce loss of nirogen and generation of offensive odor during composting of poultry manure mixed with sawdust.

• Carbon letters
• /
• v.5 no.4
• /
• pp.180-185
• /
• 2004

Thermolysis of $Cu(NO_3)_2{\cdot}3H_2O$ impregnated activated carbon fiber (ACF) was studied by means of XRD analysis to obtain Cu-impregnated ACF. $Cu(NO_3)_2{\cdot}3H_2O$ was converted into $Cu_2O$ around $230^{\circ}C$. The $Cu_2O$ was reduced to Cu at $400^{\circ}C$, resulting in ACF-C(Cu). Some Cu particles have a tendency to aggregate through the heat treatment, resulting in the ununiform distribution in ACF. Catalytic decomposition of NO gas has been performed by Cu-impregnated ACF in a column reactor at $400^{\circ}C$. Initial NO concentration was 1300 ppm diluted in helium gas. NO gas was effectively decomposed by 5~10 wt% Cu-impregnated ACF at $400^{\circ}C$. The concentration of NO was maintained less than 200 ppm for 6 hours in this system. The ACF-C(Cu) deoxidized NO to $N_2$ and was reduced to ACF-$C(Cu_2O)$ in the initial stage. The ACF-$C(Cu_2O)$ also deoxidized NO to $N_2$ and reduced to ACF-C(CuO). This ACF-C(CuO) was converted again into ACF-C(Cu) by heating. There was no consumption of ACF in mass during thermolysis and catalytic decomposition of NO to $N_2$ by copper. The catalytic decomposition was accelerated with increase of the reaction temperature.

• 한국연소학회:학술대회논문집
• /
• 1997.06a
• /
• pp.69-76
• /
• 1997

Industrial-scale pulse corona process to remove $SO_2$ and $NO_x$ simultaneously from combustion flue gas has been studied. The pilot plant built in the present study treats 2,000 $Nm^3$/hr of flue gas from a boiler. The geometry of the pulse corona reactor is similar to that of an electrostatic precipitator commonly used in industry, A thyratron switch and magnetic pulse compressors, which can generate up to 130 kV of peak pulse voltage and up to 30 kW of average pulse power, have been used to produce pulsed corona. The removal efficiencies of $S0_2$ and $NO_x$ with the present process are maximum of 95 % and 85 %, respectively. Electrical power consumption to produce the pulsed corona, which has been one of the major difficulties to apply this process to industry, has been evaluated in the present study. The results showed that the power consumption can be reduced significantly by simultaneous addition of hydrocarbon injection and heterogeneous phase reactions to the process.

• Membrane Journal
• /
• v.26 no.1
• /
• pp.38-42
• /
• 2016

Polyvinylpyrrolidone (PVP), which is glassy polymer to have amide functional group, was induced to fabricate the facilitated olefin transport membranes for olefin/paraffin separation. Separation performance for the mixed gas consisting of propylene and propane (50 : 50 vol%) was measured by gas chromatography and bubble flow meter. The properties of membranes were confirmed by scanning electron microscope and FT-IR. The results of long-term separation tests showed the selectivity of 15 and permeance of 1.3 GPU. The membranes was compared with poly(2-ethyl-2-oxazoline) $(POZ)/AgBF_4/Al(NO_3)_3$ membranes and the characteristics were confirmed as polymer matrix for facilitated transport membranes.

• Proceedings of the KIEE Conference
• /
• 1994.11a
• /
• pp.231-233
• /
• 1994

We have studied a properly of N-docosyl pyridinium(TCNQ) Langmuir-Blodgett film at room temperature with the $NO_2$ gas-detection characteristics. As a result, we have found that their conductivities were increased by 6 times at 5 layers(about $250{\AA}$ thickness) LB film. However, their reproducibility was not able to be measured at room temperature. Therefore, we must find their working temperature which was able to activate gas-detection characteristics. The $NO_2$ gas response experiments under 200 ppm concentration in $50^{\circ}C$ show that :here are increment of electrical conductivity by 8 times and 100 seconds of response time, and 200 seconds of recovery times at $60^{\circ}C$.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.4 no.3
• /
• pp.139-144
• /
• 2003

A flat type micro gas sensor was fabricated on the p-type silicon wafer with low stress Si$_3$N$_4$, whose thickness is 2 ${\mu}{\textrm}{m}$, using MEMS technology. WO$_3$ thin film as a sensing material for detection of NO$_2$ gas was deposited using a tungsten target by sputtering method, followed by thermal oxidation at several temperatures (40$0^{\circ}C$-$600^{\circ}C$) for one hour. NO$_2$ sensitivities were investigated for the WO$_3$ thin films with different annealing temperatures. The highest sensitivity was obtained for the samples annealed at $600^{\circ}C$ when it was operated at 20$0^{\circ}C$. The results of XRD analysis showed the annealed samples had polycrystalline phase mixed with triclinic and orthorhombic structures. The sample exhibits higher sensitivity when the system has less triclinic structure. The sensitivities, $R_{gas}/R_{air},$ operating at 20$0^{\circ}C$ to 5 ppm NO$_2$ of the sample annealed at $600^{\circ}C$ were approximately 90.

• Journal of the Korean Institute of Gas
• /
• v.2 no.4
• /
• pp.47-52
• /
• 1998

Water vapor absorption performance of four components solution ($LiBr+LiNO_3+LiC1+H_2O$) which could be substituted for commonly used $LiBr/H_2O$ solution in water cooled abosorption chiller is tested using a vertical tube absorber. Inlet solution concentration, inlet solution temperature, solution flow rate and inlet temperature of cooling water is varied as experimental parameters. The results of the experiment of water vapor absorption performance show that four components solution should have $2\%$ higher concentration for equal absorption capacity of $LiBr/H_2O$. But considering that four components solution have higher solubility than LiBr solution about $3\%$ high oncentration, four components solution ($LiBr+LiNO_3+LiC1+H_2O$) have more absorption capacity than LiBr solution in actual absorption chiller and can be applied to a small or air cooled absorption chiller.

• The Korean Journal of Ceramics
• /
• v.5 no.2
• /
• pp.110-114
• /
• 1999

NOx sensing properties of $Ba_2WO_5$ were investigated by varying the sintering temperature in an effort to study the effects of the neck-width on gas sensitivity. $Ba_2WO_5$ sintered at $800^{\circ}C$, which exhibits neck-controlled conduction provides highest sensitivity of 47 and 29 at $500^{\circ}C$ to NO and $NO_2$, respectively. The samples sintered beyond $800^{\circ}C$ show sintering temperature-independent gas sensitivity. This may be because the grain boundary control is dominant at lower sintering temperatures and open neck control is dominant at higher sintering temperatures than $800{\circ}C$. The NOx sensing mechanism of $Ba_2WO_5$ was briefly discussed.