• Journal of Korean Society on Water Environment
• /
• v.30 no.3
• /
• pp.269-282
• /
• 2014

The objective of this study is to find out whether the developed semi-empirical biofilm model can be applicable to real BAF pilot-scale wastewater treatment. In addition, the optimum operating conditions of BAF as a function of process variables such as organic loading change can be drawn based on the simulation results of model. The results will provide the economic and efficient BAF process design and operating control. As a result, developed semi-empirical biofilm model which is relatively simple compared to mathematical model can simulate three BAF processes consisted of 25 layers within 1 seconds. When this model was used for simulating real pilot scale BAF process and the simulated water quality values were compared to experimental ones, simulated TCOD, SCOD, TN, $NH_4{^+}$-N, $NO_x{^-}$-N, alkalinity values were different to experimental ones within 21%, 20%, 8.1%, 48%, 10%, and 23%, respectively. Therefore, if the BAF system was equipped with automatic control, the BAF process can be better efficiently adapted under the condition of significant change of influent loading.

• Journal of the Korean Ceramic Society
• /
• v.46 no.6
• /
• pp.574-582
• /
• 2009

$UO_2$ microsphere particles, core material of HTGR(High Temperature Gas Reactor) nuclear fuel, were prepared using by the GSP(Gel Supported Precipitation) method which is a modified-method of the wet sol-gel process. The spherical shape of initial liquid ADU droplets from the vibration nozzle system was continuously kept till the conversion to the final $UO_2$ microsphere. But the size of a final $UO_2$ microsphere was shrunken to about 25% of an initial ADU droplet size. Also, we found that the composition of dried-ADU gel particles was constituted of the very complicated phases, coexisted the U=O, C-H, N-H, N-O, and O-H functional groups by FT-IR. The important factors for obtain the no-crack $UO_2$ microsphere during the thermal treatment processes must perfectly wash out the remained-$NH_4NO_3$ within the ADU gel particle in washing process and the selections of an appropriate heating rate at a suitable gas atmosphere, during the calcining of ADU gel particles, the reducing of $UO_3$ particles, and the sintering of $UO_2$ particles, respectively.

• Membrane and Water Treatment
• /
• v.8 no.5
• /
• pp.449-462
• /
• 2017

Direct treatment of municipal wastewater by forward osmosis (FO) process was evaluated in terms of water flux decline, reverse salt diffusion, pollutants rejection and concentration efficiency by using synthetic seawater as the draw solution. It was found that when operating in PRO mode (active layer facing the draw solution), although the FO membrane exhibited higher osmotic water flux, more severe flux decline and reverse salt diffusion was also observed due to the more severe fouling of pollutants in the membrane support layer and accompanied fouling enhanced concentration polarization. In addition, although the water flux decline was shown to be lower for the FO mode (active layer facing the feed solution), irreversible membrane fouling was identified in both PRO and FO modes as the water flux cannot be restored to the initial value by physical flushing, highlighting the necessity of chemical cleaning in long-term operation. During the 7 cycles of filtration conducted in the experiments, the FO membrane exhibited considerably high rejection for TOC, COD, TP and $NH_4{^+}-N$ present in the wastewater. By optimizing the volume ratio of seawater draw solution/wastewater feed solution, a concentration factor of 3.1 and 3.7 was obtained for the FO and PRO modes, respectively. The results demonstrated the validity of the FO process for direct treatment of municipal wastewater by using seawater as the draw solution, while facilitating the subsequent utilization of concentrated wastewater for bioenergy production, which may have special implications for the coastline areas.

• Asian-Australasian Journal of Animal Sciences
• /
• v.20 no.12
• /
• pp.1849-1857
• /
• 2007

The experiment was carried out using fistulated multiparous Holstein Friesian crossbred (75% Holstein Friesian and 25% Red Sindhi) dairy cows in their dry period fed on untreated rice straw to evaluate the nutritive value of local protein feed resources using the in sacco method and in vitro pepsin-pancreatin digestion. Experimental feeds were cottonseed meal (CSM); soybean meal (SBM); dried brewery's grains (DBG); palm kernel meal (PSM); cassava hay (CH); leucaena leaf meal (LLM). Each feedstuff was weighed into duplicate nylon bags and incubated in each of the two rumen fistulated cows for 0, 2, 4, 8, 16, 24, and 48 h. Rumen feed residues from bags of 16 h incubation were used for estimation of lower gut digestibility by the technique of in vitro pepsin-pancreatin digestion. Ruminal ammonia-nitrogen ($NH_3-N$) concentrations did not differ between treatments or time with a mean of 5.5 mg%. Effective degradability of DM of CSM, SBM, DBG, PSM, CH and LLM were 41.9, 56.1, 30.8, 47.0, 41.1 and 47.5%, respectively. Effective degradabilities of the CP in feedstuffs were 49.6, 59.2, 40.9, 33.5, 47.3 and 65.0% for the respective feedstuffs. The CP in vitro pepsin-pancreatin digestibility as ranked from the highest to the lowest were SBM, CSM, LLM, CH, DBG, PSM, respectively. The intestinal and total tract digestion of feedstuffs in the current study were relatively lower than that obtained from previous literature. The results of this study indicate that SBM and LLM were highly degradable in the rumen, while CH, CSM and DBG were less degradable and, hence resulted in higher rumen undegradable protein. Soybean meal and LLM could be used to improve rumen ecology whilst CH, CSM and DBG could be used as rumen by-pass protein for ruminant feeding in the tropics.

• Asian-Australasian Journal of Animal Sciences
• /
• v.14 no.10
• /
• pp.1405-1408
• /
• 2001

Ca salt of soybean oil (PSO) and that of mustard oil plus mahua oil (PMOMO) (50:50) were prepared using double decomposition method, and further tested for their fatty acid composition and degree of saponification. Furthermore, the different levels of protected fat of PSO and PMOMO were evaluated in wheat straw based total mixed ration (TMR) in vitro. Results indicated that capric, lauric, myristic, palmitic, steric, oleic, linoleic, leinolenic acids were traces, traces, traces, 10.00, 2.00, 25.00, 58.50, 5.0% in PSO while the corresponding values in PMOMO were 1.08, 0.28, 0.45, 16.9, 12.95, 44.38, 17.46 and 6.50%, respectively. The degree of saponification of both protected fat supplements was more than 80%. Six treatment combinations were tested I.e., blank without feed and fat supplement (T1); control diet with out fat supplement (T2); control diet plus bypass fat supplement (PSO) so that diet contain 5% fat (T3); control diet plus bypass fat supplement (PSO) so that diet contain 7.5% fat (T4); two more diets viz. T5 and T6 were formulated using bypass fat supplement from PMOMO containing 5 and 7.5% fat respectively. TMR was prepared using 50% concentrate mixture and 50% wheat straw. Result indicated that TVFA, $NH_3-N$,TCA-N, total-N and total gas production were increased in treatment diets at 7.5% level of supplementation, however, fermentation pattern remain similar at 5.0% level of supplementation with respect to control diet. Nevertheless, IVDMD and IVOMD values remained unchanged, rather non-significant at both fat levels and with the both fat sources. On the basis of results it was concluded that Ca-salt of Soybean oil or Mustard plus Mahua oil did not show any negative effect either on digestibility or on microbial protein synthesis in rumen, hence the dietary fat upto 7.5% level in total mixed ration based on wheat straw, could be safely used without any adverse effect on rumen fermentation.

• Asian-Australasian Journal of Animal Sciences
• /
• v.21 no.1
• /
• pp.42-50
• /
• 2008

Twenty-four, lactating dairy cows were randomly assigned according to a Rrandomized complete block design (RCBD) to investigate the effect of sunflower oil supplementation (SFOS) with cassava hay based-diets on feed intake, digestibility of nutrients, rumen fermentation efficiency and milk production. The treatments were as follows: T1 = Control, using commercial concentrate as a supplement (CON); T2 = Concentrate with cassava hay (CHSO-0); T3 = Concentrate with cassava hay and 2.5% sunflower oil (CHSO-2.5); T4 = Concentrate with cassava hay and 5% sunflower oil (CHSO-5). The cows were offered concentrate feed at a ratio of concentrate to milk production of 1:2 and urea-treated rice straw was fed ad libitum. The results revealed that feed intake, digestibility of nutrients and ruminal pH were similar among all treatments, while ruminal NH3-N was lower (p<0.05) with SFOS. Blood urea-N (BUN) and milk urea-N (MUN) were not significantly affected by SFOS. The ruminal concentrations of volatile fatty acids were significantly different among the treatments. Sunflower oil supplementation significantly increased concentrations of unsaturated fatty acids, and ratio of unsaturated to saturated fatty acids in the milk, particularly the conjugated fatty acids, was significantly enhanced. Furthermore, production costs of treatments with sunflower oil supplementation were lower than for the control. Based on this study, SFOS in cassava hay based-diets improves rumen ecology, milk yield and milk quality, especially in terms of conjugated linoleic acids.

• Korean Journal of Materials Research
• /
• v.26 no.1
• /
• pp.47-53
• /
• 2016

Silicon nitride ($SiN_x:H$) films made by plasma enhanced chemical vapor deposition (PECVD) are generally used as antireflection layers and passivation layers on solar cells. In this study, we investigated the properties of silicon nitride ($SiN_x:H$) films made by PECVD. The passivation properties of $SiN_x:H$ are focused on by making the antireflection properties identical. To make equivalent optical properties of silicon nitride films, the refractive index and thickness of the films are fixed at 2.0 and 90 nm, respectively. This limit makes it easier to evaluate silicon nitride film as a passivation layer in realistic application situations. Next, the effects of the mixture ratio of the process gases with silane ($SiH_4$) and ammonia ($NH_3$) on the passivation qualities of silicon nitride film are evaluated. The absorption coefficient of each film was evaluated by spectrometric ellipsometry, the minority carrier lifetimes were evaluated by quasi-steady-state photo-conductance (QSSPC) measurement. The optical properties were obtained using a UV-visible spectrophotometer. The interface properties were determined by capacitance-voltage (C-V) measurement and the film components were identified by Fourier transform infrared spectroscopy (FT-IR) and Rutherford backscattering spectroscopy detection (RBS) - elastic recoil detection (ERD). In hydrogen passivation, gas ratios of 1:1 and 1:3 show the best surface passivation property among the samples.

• Proceedings of the Korean Institute of Electrical and Electronic Material Engineers Conference
• /
• 2003.07a
• /
• pp.339-342
• /
• 2003

The corrosion characteristics of Copper by oxidizers in Cu CMP slurry has been investigated. Key experimental variables that has been investigate are the corrosion rate by different oxidizers containing slurry of Cu CMP. Oxidizers in Cu CMP slurry reacts with Cu surfaces to raise the oxidation state of the metal via a reduction-oxidation reaction, resulting in either dissolution of the Cu or the formation of Ta surface film on the metal.[1] When Cu films were corroded adding each oxidizer, corrosion rate increased as much as higher Icorrosion. The corrosion rate of Cu was the largest as added $(NH_4)_2S_2O_8$. The higher content of Urea Hydrogen peroxide was, the higher corrosion rate was measured. Putting in tartaric acid as complexing agent, the corrosion rates of the compounds(Urea hydrogen peroxide+$H_2O_2$) are uniformly. As a result of Cu corrosion by $Cu(NO_3)_2$, the high corrosion rate was determined by even small amounts of $Cu(NO_3)_2$. Consequently, this can be explained by assuming that corrosion by oxidizers has primary effects on the removal rate of Cu and the proper oxidizer needs to be chosen in accordance with relationship of each slurry agent.

• Transactions of the Korean Society of Mechanical Engineers
• /
• v.17 no.6
• /
• pp.1556-1571
• /
• 1993

Nitrogen oxides ($NO_x$) are air pollutants which are generated from the combustion of fossil fuels. Stage combustion is an effective method to reduce $NO_x$ emissions. The effects of $NO_x$ reduction by stage combustion in a pilot scale combustor(6.6kW) have been investigated using propane gas flames laden with NH$_{3}$ as Fuel-N. The results in this study are follows; (1) $NO_x$ emissions are dependent on the reducing environment of fuel-rich zone regardless of total air ratio. The maximum $NO_x$ reduction is at the stoichiometric ratio of 0.8 to 0.9 in the reducing zone. (2) $NO_x$ reduction is maximum when burnout air is injected at the point where the oxygen in reducing zone is almost consumed. (3) $NO_x$ reduction is dependent upon the temperature of reducing zone with best effect above 950.deg. C in the reducing zone. (4) The fuel stage combustion is more effective to reduce $NO_x$ formation in the wide range of stoichiometric ratio than two stage combustion. (5) The results of this study could be utilized mainly in a design strategy for low $NO_x$ emission from the combustion of high fuel-nitrogen in energy sources ratio than as an indication of the absolute levels of $NO_x$ which can be achieved by stage combustion techniques in large scale facilities.

• Proceedings of the Korean Vacuum Society Conference
• /
• 2011.08a
• /
• pp.176-176
• /
• 2011

실리콘 질화막($Si_3N_4$)과 산화막($SiO_2$)은 반도체 소자를 구성하는 물질 중 가장 널리 사용되는 유전 또는 절연물질이다. 이러한 실리콘 산화막과 질화막은 적용할 소자에 따라 다양한 CVD나 ALD 공정을 기반으로 제조한다. 증착공정 개발에 있어 실리콘 증착소재가 성공여부를 결정하는 근간이 되며, 이는 실리콘 증착소재의 특성에 따라 증착된 산화막과 질화막의 물성이 크게 변하기 때문이다. 실리콘 증착소재 개발을 위해서 국내외 증착소재 합성업체가 노력을 기울이고 있지만 개발된 증착소재의 특성을 정확히 진단하기 위한 기술이 뒷받침되지 않아 개발 효율이 높지 않은 것이 현실이다. 한국표준과학연구원 내 진공기술센터에서는 이러한 실리콘 증착소재의 특성, 특히 반응성을 평가하기 위한 기술 및 시스템을 개발하고 이를 활용하고 있다. 본 연구에서는 적외선 분광법을 이용하여 개발된 증착소재의 기상 열적안전성 및 반응기체에 따른 반응성을 실시간으로 진단하였다. 반응기체로는 산화막을 증착하기 위해 가장 많이 사용되는 $H_2O$와 질화막을 증착하기 위해 가장 많이 사용되는 $NH_3$를 사용하였다. 각 반응기체의 유량별, 가스셀 온도, 압력 등의 반응조건의 변화에 따른 실리콘 증착소재의 반응성 및 안정성을 평가하고 기존에 양산용으로 소자제조에 사용되고 있는 증착소재와 비교평가를 수행하였다.