• Applied Chemistry for Engineering
• /
• v.5 no.2
• /
• pp.295-304
• /
• 1994

$Mo-V-O/SnO_2$(VM/Sn) and $SnO_2/Mo-V-O$(Sn/VM) catalysts have been prepared and characterized by XRD, BET, SEM and TPD of ammonia. The catalytic reaction of acrolein oxidation with these catalysts, in a continuous-flow fixed-bed reactor, showed that they had higher conversion of acrolein and higher yield of acrylic acid than those of Mo-V-O itself. The origin of the observed synergy studied by TPD, TPR and TPO is explained by the cooperation of $SnO_2$ and Mo-V-O at their interfaces where electrons flow from Mo-V-O phase to $SnO_2$ and $SnO_2$ produces spill-over oxygens, which, by being transported onto the surface of Mo-V-O, reoxidize the partially reduced active sites.

• Korean Chemical Engineering Research
• /
• v.50 no.4
• /
• pp.723-728
• /
• 2012

The production of biodiesel by transesterification of soybean oil was performed on $MoO_3$, $SnO_2$ and $CeO_2$ mixed oxides. The catalysts were characterized using XRD and $NH_3$-TPD. $MoO_3$ showed the highest activity among the three metal oxides. When 7 wt% of catalysts was introduced into the reactants, the highest activity was obtained and the water added to reactant decreased the catalytic activity. $MoO_3$ and $SnO_2$ mixed with 50:50 showed the highest activity and $CeO_2$ added with 20% on the $MoO_3-SnO_2$ mixed oxide also showed the highest activity. The catalytic activity showed to have a good relationship with the amount of acid site of catalysts. When the waste soybean oil was used as a reactant, the conversion was decreased about 30%.

• Applied Chemistry for Engineering
• /
• v.5 no.2
• /
• pp.327-336
• /
• 1994

The synergistic effects in mechanical mixture catalysts of Mo-V-O and metal oxide were investigated for the selective oxidation of acrolein. The metal oxides used are $SnO_2$, ${\alpha}-Sb_2O_4$, $WO_3$, ${\alpha}-Al_2O_3$, CuO, $MnO_2$, $Cu_2O$, MgO, CoO, and ZnO. Mechanical mixtures of Mo-V-O plus $SnO_2$ or ${\alpha}-Sb_2O_4$ had resulted in higher conversion of acrolein and higher yield of acrylic acid than Mo-V-O. The origin of the synergy is attributed to the cooperation of Mo-V-O and $SnO_2$ or ${\alpha}-Sb_2O_4$, in which $SnO_2$ or ${\alpha}-Sb_2O_4$ forms dissociated oxygens at their oxygen vacancies and transports them to Mo-V-O. $Cu_2O$, MgO, CuO, and $MnO_2$, increased conversion of acrolein but decreased yield of acrylic acid. CoO and ZnO inhibited the catalytic performance of Mo-V-O. The different role of these metal oxides is explained in terms of their oxidation-reduction properties.

• Journal of Sensor Science and Technology
• /
• v.17 no.4
• /
• pp.281-288
• /
• 2008

Polyacrylonitrile(PAN)/metal oxide(MO) nanocomposite mats with a thickness of 0.12 mm were electrospun by adding 0 to 10 wt% of MO nanoparticles ($Fe_2O_3$, ZnO, $SnO_2$, $Sb_2O_3-SnO_2$) into PAN. Pt electrode was patterned on $Al_2O_3$ substrate by DC sputtering and then the PAN(/MO) mats on the Pt patterned $Al_2O_3$ were electrically wired to investigate the $CO_2$ gas sensing properties. As the MO content rose, the fiber diameter decreased due to the presence of lumps caused by the presence of MOs in the fiber. The PAN/2% ZnO mat revealed a faster response time of 93 s and a relatively short recovery of 54 s with a ${\Delta}R$ of 0.031 M${\Omega}$ at a $CO_2$ concentration of 200 ppm. The difference in sensitivity was not observed significantly for the PAN/MO fiber mats in the $CO_2$ concentration range of 100 to 500 ppm. It can be concluded that an appropriate amount of MO nanoparticles in the PAN backbone leads to improvement of the $CO_2$ gas sensing properties.

• Proceedings of the Korean Vacuum Society Conference
• /
• 2016.02a
• /
• pp.247.2-247.2
• /
• 2016

산업 발달에 따라 여러 유해 가스들의 양이 많아지고 그 종류가 다양해지고 있다. 이에 따라 가스센서의 필요성도 더욱 증가 하였고, 이러한 변화에 대응하기 위해 기존 가스 센서로 이용되던 $SnO_2$나 ZnO보다 더 나은 화학정 안정성과 내구성을 얻고자 2D $MoO_3$ 박막의 대면적 합성을 연구를 진행하였다. 기존 $MoO_3$ 합성에 사용되던 Pyrolysis 방식이 아닌, 플라즈마 화학기상증착법(PECVD)을 이용해 공정과정을 단순화시켜 센서 수율 증대를 목표로 하였다. E-beam avaporator을 이용해 Mo 금속 박막을 $SnO_2$ 기판 위에 증착시킨 후 $O_2$ 플라즈마를 이용한 Implantation 방식으로 박막을 합성하였고, 라만 분광법, X-ray 광전자 분광법(XPS)을 통해 $MoO_3$ 박막이 nm단위로 합성된 것을 확인하였다. 이를 바탕으로 $MoO_3$ 박막을 2D 가스센서의 소재로 적용하는 것이 가능할 것이라고 예상된다.

• Proceedings of the Korean Institute of Electrical and Electronic Material Engineers Conference
• /
• 1995.11a
• /
• pp.221-223
• /
• 1995

The electrical conductivity of SnO$_2$added ZnO was investigated using the DC and AC methods. The electrical conductivity of SnO$_2$added ZnO was decreased with increasing the concentration of SnO$_2$. The cal쳐lated effective dielectric constants of 3 mol%, 5 mo1%, and 7 mol% are ~7, ~13, and ~120, respectively. The factor of the decrease for the electrical conductivity seems to be the increase of the resistance of grain decreasing the size of grain.

• Korean Journal of Materials Research
• /
• v.11 no.7
• /
• pp.603-608
• /
• 2001

$MO-SiO_2$ (M = Zn, Sn, In, Ag, Ni) binary silica gels were synthesized by sol-gel method and their structural change with the kind of metal ions was characterized by XRD, FT- IR and $^{29}$Si-NMR. Although X-ray analysis showed partial recrystallization of $AgNO_3$ in $Ag-SiO_2$gel, crystalline phase formed by the bonding between metal ion and the silica matrix didn't appear in all $MO-SiO_2$ gels. The FT-IR analysis showed that Zn, Sn and in partially formed Si-O-M bonding in silica matrix and made an shift of absorption peak to by Si-O-Si symmetrical vibration. In addition, $^{29}Si-NMR$ studies showed that Zn, Sn and In didn't affect sol-gel process of silica and were linked with non-bridging oxygen of the linear silica structure, which formed imperfect network because of low temperature sol-gel process. Ag and Ni make a role of catalysis on sol-gel process, resulting in densifying the silica network structure.

• Proceedings of the Korean Nuclear Society Conference
• /
• 1995.05a
• /
• pp.818-823
• /
• 1995

방사성 폐기물 소각로에서 발생하는 off-gas중에는 NOx가 포함되어 있으며 이를 제어하기 위하여 NOx 배출의 재어에 효과적이라고 알려진 SCR법을 사용하여 실험을 행하였다. NOx 방출 저감화를 위해 상업화된 다양한 촉매들 중에서 V$_2$O$_{5}$, MoO$_3$ Fe$_2$O$_3$ 그리고 SnO$_2$를 TiO$_2$honeycomb형태의 담체에 담지시켜 제조한 촉매들의 특성을 조사하고 여러 변수들, 예를 들면 촉매의 종류, 담체의 종류, 반응온도, feed의 조성 등이 반응특성에 미치는 영향을 실험실 규모의 반응기에서 조사하였다. 10%V$_2$O$_{5}$TiO$_2$촉매가 35$0^{\circ}C$에서 94.4%의 높은 NO-$N_2$전환율을 보였으며 열적 안정성이 높은 SnO$_2$나 MoO$_3$의 첨가는 높은 전환율을 보이는 온도 범위를 확장시켜 주었다.

• Journal of the Korean Crystal Growth and Crystal Technology
• /
• v.6 no.2
• /
• pp.213-219
• /
• 1996

Pellet type $Pt/MoO_{3}$ gas sensor which is operating at much lower temperature than conventional ceramic sensors such as $SnO_{2}$ or ZnO was fabricated. Morphology and crystal structure of $Pt/MoO_{3}$ according to calcination temperature have been characterized with Transmission Electron microscopy and X-Ray powder diffraction. The characterization indicates that as calcination temperature is increased, overlayers of $MoO_{3}$ on Pt are produced, but additionally, the Cl content associated with the Pt phase diminishes. The gas dasorption test showed that the change in surface morphology is closely related to hydrogen storage capacity of the sample. The gas sensitivities at $50^{\circ}C$ and $150^{\circ}C$ are very high.

• Nano
• /
• v.13 no.11
• /
• pp.1850130.1-1850130.12
• /
• 2018

A novel strontium titanate/binary metal sulfide ($SrTiO_3/SnCoS_4$) heterostructure was synthesized by a simple two-step hydrothermal method. The visible-light-driven photocatalytic performance of $SrTiO_3/SnCoS_4$ composites was evaluated in the degradation of methyl orange (MO) under visible light irradiation. The photocatalytic performance of $SrTiO_3/SnCoS_4-5%$ is much higher than that of pure $SrTiO_3$, $SnCoS_4$, $SrTiO_3/SnS_2$ and $SrTiO_3/CoS_2$. The $SrTiO_3/SnCoS_4$ composite material with 5 wt.% of $SnCoS_4$ showed the highest photocatalytic efficiency for MO degradation, and the degradation rate could reach 95% after 140 min irradiation time. The enhanced photocatalytic activity was ascribed to not only the improvement of visible light absorption efficiency, but also the construction of a heterostructure which make it possible to effectively separate photoexcited electrons and holes in the two-phase interface.