• 한국세라믹학회지
• /
• 제25권3호
• /
• pp.201-206
• /
• 1988

Mo 입자의 첨가가 Al_2O_3$ 세라믹스의 미세구조와 기계적 성질에 미치는 영향을 알아보기 위하여 평균입경이 2-micron인 Mo와 6-micron인 Mo를 Al_2O_3$에 각 분산시켜 1$600^{\circ}C$, $H_2$ 분위기에서 5시간 소결하였다. Mo는 Al_2O_3$의 입자성장을 억제시켰으며 Mo의 입자가 작을 때 그 효과는 크게 나타났다. 2-micron Mo를 분산한 경우 꺽임강도와 파괴인성은 크게 증가하여하였으며, 6-micron Mo를 분산한 경우 강도는 증가하지 않았으나 파괴인성은 다소 증가하였다. Al_2O_3$-Mo계의 인성증진기구는 균열편향에 의한 파단면의 증가와 미세균열에 의한 균열전파에너지의 분산에 의한 것으로 보인다.

• 공업화학
• /
• 제10권2호
• /
• pp.231-236
• /
• 1999

결정상과 분산도가 조절된 $MoO_3$/$SiO_2$ 담지촉매를 제조하여 촉매의 표면특성과 디벤조티오펜 탈황반응의 활성도를 고찰하였다. Mo의 표면담지량은 4 atoms $Mo/nm^2$이었으며, 실리카 표면 위에 형성된 $MoO_3$의 결정상은 sintered hexagonal, sintered orthorhombic, 및 dispersed hexagonal상이었다. XRD, Raman, 및 $O_2$ 흡착 결과 $MoO_3$의 표면분산도는 sintered hexagonal < sintered orthorhombic < dispersed hexagonal 순으로 증가하였다. TPR 결과 $MoO_3$ 결정은 $650^{\circ}C$에서 $MoO_2$로, $1000^{\circ}C$에서 Mo로 환원됨을 알 수 있었다. 디벤조티오펜 탈황반응을 30기압, $350{\sim}500^{\circ}C$ 온도범위에서 수행하였으며, 실험 결과 활성도는 $MoO_3$ 결정체의 $SiO_2$ 표면에서의 분산도에 비례하여 증가함을 알 수 있었다.

• Bulletin of the Korean Chemical Society
• /
• 제27권10호
• /
• pp.1623-1632
• /
• 2006

NiO supported on zirconia modified with $MoO_3$ for acid catalysis was prepared by drying powdered $Ni(OH)_2-Zr(OH)_4$ with ammonium heptamolybdate aqueous solution, followed by calcining in air at high temperature. The characterization of prepared catalysts was performed using FTIR, Raman, XRD, and DSC. $MoO_3$ equal to or less than 15 wt% was dispersed on the surface of catalyst as two-dimensional polymolybdate or monomolybdate, while for $MoO_3$ above 15 wt%, crystalline orthorhombic phase of $MoO_3$ was formed, showing that the critical dispersion capacity of $MoO_3$ on the surface of catalyst is 0.18 g/g NiO-$ZrO_2$ on the basis of XRD analysis. Acidity and catalytic activities for acid catalysis increased with the amount of dispersed $MoO_3$. The high acid strength and acidity was responsible for the Mo=O bond nature of the complex formed by the interaction between $MoO_3$ and $ZrO_2$. The catalytic activity for acid catalysis was correlated with the acidity of the catalysts measured by the ammonia chemisorption method.

• 한국분말재료학회지
• /
• 제26권3호
• /
• pp.208-213
• /
• 2019

In this study, lanthanum oxide ($La_2O_3$) dispersed molybdenum ($Mo-La_2O_3$) alloys are fabricated using lanthanum nitrate solution and nanosized Mo particles produced by hydrogen reduction of molybdenum oxide. The effect of $La_2O_3$ dispersion in a Mo matrix on the fracture toughness at room temperature is demonstrated through the formation behavior of $La_2O_3$ from the precursor and three-point bending test using a single-edge notched bend specimen. The relative density of the $Mo-0.3La_2O_3$ specimen sintered by pressureless sintering is approximately 99%, and $La_2O_3$ with a size of hundreds of nanometers is uniformly distributed in the Mo matrix. It is also confirmed that the fracture toughness is $19.46MPa{\cdot}m^{1/2}$, an improvement of approximately 40% over the fracture toughness of $13.50MPa{\cdot}m^{1/2}$ on a pure-Mo specimen without $La_2O_3$, and this difference in the fracture toughness occurs because of the changes in fracture mode of the Mo matrix caused by the dispersion of $La_2O_3$.

• Bulletin of the Korean Chemical Society
• /
• 제21권12호
• /
• pp.1239-1244
• /
• 2000

A study of K addition to the catalyst of CoMo/ ${\gamma}-Al_2O_3$ was studied. The catalyst with 10 at% of K to Mo atoms in 3C10M, the catalyst added 3 wt% CoO to 10 wt% $MoO_3/{\gamma}-Al_2O_3$, showed the highest activity for water gas shift reaction. The addition of K retarded the reducibility of cobalt-molybdenum catalysts. It gave, however, good dispersion and large BET surface area to the catalysts which were attributed to the disappearance of polymolybdate clustyer such as $Mo_7O_{24}^{6-}$ and the formation of small Mo$O_4^{2-}$ cluster. It was confirmed by the analyses of pore size distribution, activation energy, Raman spectroscopy, and electron diffraction. The activation energies and the frequency factors of the catalysts 3C10M and 5KC10M (the catalyst added 5 at% K for Mo to the catalyst 3C10M) were 43.1 and 47.8 kJ/mole, and 4,297 and 13,505 $sec^{-1}$, respectively. These values were also well correlated with our suggestion. These phenomena were attributed to the direct interaction between K and CoMo oxides irrelevant to the support.

• 한국분말재료학회지
• /
• 제25권4호
• /
• pp.322-326
• /
• 2018

The hydrogen reduction behavior of $MoO_3-CuO$ powder mixture for the synthesis of homogeneous Mo-20 wt% Cu composite powder is investigated. The reduction behavior of ball-milled powder mixture is analyzed by XRD and temperature programmed reduction method at various heating rates in Ar-10% $H_2$ atmosphere. The XRD analysis of the heat-treated powder at $300^{\circ}C$ shows Cu, $MoO_3$, and $Cu_2MoO_5$ phases. In contrast, the powder mixture heated at $400^{\circ}C$ is composed of Cu and $MoO_2$ phases. The hydrogen reduction kinetic is evaluated by the amount of peak shift with heating rates. The activation energies for the reduction, estimated by the slope of the Kissinger plot, are measured as 112.2 kJ/mol and 65.2 kJ/mol, depending on the reduction steps from CuO to Cu and from $MoO_3$ to $MoO_2$, respectively. The measured activation energy for the reduction of $MoO_3$ is explained by the effect of pre-reduced Cu particles. The powder mixture, hydrogen-reduced at $700^{\circ}C$, shows the dispersion of nano-sized Cu agglomerates on the surface of Mo powders.

• The Korean Journal of Ceramics
• /
• 제5권2호
• /
• pp.115-118
• /
• 1999

Carbon composites with $MoSi_2$ dispersion were prepared by hot-pressing at $1700^{\circ}C$ under 30 MPa for 1 h using polysilazance as binding material. The composites consisted of C, $Mo_{4.8}Si_3C_{0.6}$ and SiC. Bulk density and porosity of the carbon composites with 10 vol% $MoSi_2$ was 1.8g.$\textrm{cm}^{-3}$ and 34%, respectively. This composite was oxidized about 0.05mm from the surface of the carbon composite after oxidation test at $1500^{\circ}C$ for 10h in air. Formation of the $SiO_2$ glass layer was observed by SEM. When this composite suffered damage in the coating layer, it had hardly farther oxidation because of its self-repairing property. The composite prepared in this study indicated good oxidation resistance.

• 한국산학기술학회논문지
• /
• 제5권6호
• /
• pp.558-561
• /
• 2004

암모늄헵타몰리브데이트(ammonium heptamolybdate, AHM)를 전구체로 제조한 실리카 담지 몰리브드늄$(MoO_{3}/SiO_{2})$ 촉매의 구조적 특성을 x-ray 회절기(XRD)를 사용하여 자세히 고찰하였다. 몰리브드늄의 표면담지량은 0.2부터 4.0 atoms $Mo/nm^{2}$로 변화하였으며, 담지촉매의 소성온도는 $300\~500^{\circ}C$로 변화하여 열역학적으로 형성 가능한 모든 몰리브드늄산화물의 구조를 고찰하였다. 담지량이 큰 경우(4 atoms $Mo/nm^{2}$), $300^{\circ}C$소성에서는 뭉쳐있거나 잘 분산된 hexagonal 형태의 결정체가 형성되었으며, $500^{\circ}C$로 소성온도를 증가하면 뭉친 orthorhombic 형태의 $MoO_{3}$ 결정체가 형성되었다. 뭉친 orthorhombic 형태의 결정체는 담지량이 1.1 atom $Mo/nm^{2}$이상이 되면 형성된 반면 잘 분산된 hexagonal 형태의 결정체는 가장 큰 표면 담지량 4.0 atoms $Mo/nm^{2}$에서도 고찰하기가 어려웠다. 이러한 hexagonal 결정체의 담체 표면에서의 높은 분산은 암모니아로 인한 몰리브드늄 산화물($MoO_{3}$)과 실리카($SiO_{2}$) 담체 사이의 강한 표면작용에 기인한 것으로 생각된다.

• 한국재료학회지
• /
• 제31권11호
• /
• pp.593-600
• /
• 2021

Herein, a series of g-C₃N₄ modified Bi₂MoO₆ nanocomposites using Bi₂MoO₆ and melamine as original materials are fabricated via sintering process. For presynthesis of Bi₂MoO₆ an ultrasonic-assisted hydrothermal technique is researched. The structure and composition of the nanocomposites are characterized by Raman spectroscopy, X-ray diffraction (XRD), and high-resolution field emission scanning electron microscopy (SEM). The improved photoelectrochemical properties are studied by photocurrent density, EIS, and amperometric i-t curve analysis. It is found that the structure of Bi₂MoO₆ nanoparticles remains intact, with good dispersion status. The as-prepared g-C₃N₄/Bi₂MoO₆ nanocomposites (BMC 5-9) are selected and investigated by SEM analysis, which inhibits special morphology consisting of Bi₂MoO₆ nanoparticles and some g-C₃N₄ nanosheets. The introduction of small sized g-C₃N₄ nanosheets in sample BMC 9 is effective to improve the charge separation and transfer efficiency, resulting in enhancing of the photoelectric behavior of Bi₂MoO₆. The improved photoelectronic behavior of g-C₃N₄/Bi₂MoO₆ may be attributed to enhanced charge separation efficiency, photocurrent stability, and fast electron transport pathways for some energy applications.

• 공업화학
• /
• 제24권4호
• /
• pp.391-395
• /
• 2013

본 연구에서는 자외선 흡수 물질로 잘 알려진 zinc oxide (ZnO) 나노분말을 세 가지 합성조건에서 수열합성법으로 합성하였다. 또한, 분산성을 향상시키기 위하여 합성된 ZnO 나노분말의 표면을 다양한 실란계 계면활성제를 사용하여 표면 개질하였고, 표면개질된 ZnO 나노분말을 분산제로 72 h 동안 볼밀링하여 분산 졸 시료를 제조하였다. 30 nm 크기로 합성된 ZnO 나노분말을 3-chloropropyl trimethoxy silane로 표면개질하여 폴리우레탄계 분산제로 제조한 분산 졸 시료가 가장 높은 자외선 차단 특성 및 가시광 투과율을 가지면서 분산 안정성이 가장 우수하였다.