• Proceedings of the Korean Vacuum Society Conference
• /
• 2000.02a
• /
• pp.45-45
• /
• 2000

PDP, FED, 그리고 VFD와 같은 마이크로 전자디스플레이 장치를 제작하기 위한 가장 중요한 기술중에 하나인 패널 내를 고진공으로 만드는 것과 초기의 진공을 유지하는 것이다. PDP 디스플레이는 전면판과 후면판으로 구성되어 있다. 전면판은 ITO전극, 절연체 그리고 MgO보호막으로 구성되어 있으며, 후면판은 어드레스 전극, 반사층, 격벽, 그리고 형광체층이 있다. 기존의 방식은 대기에서 프릿 글라스를 이용하여 두 장의 유리를 봉입하고, 후면판 모서리 부분에 있는 구멍에 배기 글라스 튜브를 붙이고, 튜브를 통해서 배기하고, 플라즈마 가스를 채우고, 최종적으로 tip-off를 한다. 이러한 기존의 방식을 통해서는 배기 컨덕턴스의 한계로 얻을 수 있는 초기 진공도에 한계가 있다. 아울러 두 장의 유리사이는 150$\mu$m 정도의 간격으로 되어 있고, 이웃한 격벽사이는 320$\mu$m 정도의 미세한 공간이 주어지는 구조가 컨덕턴스를 저하시킨다. 이와 같은 초기 진공도의 한계성을 극복하기 위한 연구로서, PDP 패널을 구성하는 두 장의 글라스를 진공 챔버내에서 IR heater를 이용하여 실장하였다. 대개 PbO, ZnO, SiO2,, 그리고 B？로 구성된 프릿 글라스를 대기에서 전면판에 dispensing하고 가소한다. 그리고 프릿 글라스가 형성된 전면판과 후면판을 loading, align 한 다음, 2 10-7torr까지 펌핑한 후 heating, holding 그리고 cooling 공정을 수행하므로 써 두 장의 유리를 실장하였다. 그러나 온도의 non-uniformity, 프릿 성분에 따라서 crack과 기포문제가 진공 실장과정에서 발생하였다. 이와 같은 문제를 개선하기 위해 프릿 글라스의 새로운 조성과 온도 uniformity를 유지하므로써, 프릿 글라스의 기포와 crack 발생없이 재현성 있게 진공 실장하였다. Leak channel 형성유무를 검증하기 위하여 챔버 자체의 펌핑 속도와 제작된 패널의 펌핑 속도를 비교하므로써, leak channel형성 유무를 평가할 수 있는 방법을 이용하였다. 이와 같은 방법을 이용하여, crack 또는 기포가 있는 패널은 leak channel을 형성하여 패널내의 진공을 유지할 수 없음을 검증하였고, crack 또는 기포가 없는 패널은 leak channel없이 패널내의 진공을 유지할 수 있음을 검증하였다. 결과적으로 진공 인-라인 실장시 가장 중요한 요인인 프릿의 변화를 분석하므로써, 고진공을 요구하는 FPD(PDP, FED, VFD)에 적합하게 적용할 수 있으며, 아울러 실장시 진공도를 개선하므로 패널내부의 오염을 최소화하여 디스필레이로서의 효율을 극대화할 수 있을 것이다.

• Korean Journal of Materials Research
• /
• v.25 no.10
• /
• pp.552-558
• /
• 2015

The mechanical properties and microstructures of Aluminum 6056 alloys were investigated for their use in the fabrication of a piton block. The EN-AW6056 alloys exhibited a tensile strength of 375 MPa for a solution treatment temperature of $550^{\circ}C$ for 2 h followed by an aging treatment at $190^{\circ}C$ for 4 h. The microstructures of the heat treated specimen showed that the $Mg_2Si$ phase with a size of 3~5 um was dispersed throughout the aluminum matrix when the heat treatment was done. Moreover, in order to identify the forgeability of the specimen, upsetting tests were done. For up to 80 % of the upsetting ratio, the specimen maintained its original shape, and at above 80 % of the upsetting ratio, the specimen underwent crack development. The specimen was successfully forged without any defects with the examined material conditions. The material conditions together with the forging conditions are discussed in terms of the microstructures and mechanical properties.

• Proceedings of the Korean Institute of Electrical and Electronic Material Engineers Conference
• /
• 2006.04a
• /
• pp.78-80
• /
• 2006

The hybrid thin-film (HTF) passivation layer composed of the Ultra Violet (UV) curable acrylate layer and MS-31 (MgO:$SiO_2$=3:1wt%) layer was adopted in organic light emitting device (OLEO) to protect organic light emitting materials from penetrations of oxygen and water vapors. The results showed that the HTF layer possessed a very low WVTR value of lower than $0.007gm/m^{2+}day$ at $37.8^{\circ}C$ and 100% RH. This value was within the limited range of the sensitivity of WVTR measurements. And the lifetime of the HTF passivated device became almost three times longer than that of the bare device. The HTF on the OLEO was found to be very effective in protect what from the penetrations of oxygen and moisture.

• Journal of the Korean institute of surface engineering
• /
• v.54 no.5
• /
• pp.238-247
• /
• 2021

PEO (plasma electrolytic oxidation) was applied to modify the surface of AZ31 magnesium alloy in this study. The mixed solution of sodium hydroxide (NaOH) and sodium silicate (Na₂SiO₃) was used as the electrolyte, and 0 - 0.05 g/L of Ca-GP (Glycerol Phosphate Calcium salt) was added in the electrolyte as an additive. PEO treatment was conducted at a current density of 30mA/cm² for 5 minutes using a DC power supply. The surface properties were identified by SEM, XRD and surface roughness analyses, and the corrosion resistance was evaluated by potentiodynamic polarization and immersion tests. In addition, the biocompatibility was evaluated by immersion test in SBF solution. As the concentration of Ca-GP was increased, the surface morphology was denser and more uniform, and the amount of Ca and the thickness of oxide layer increased. Only Mg peak was observed in XRD analysis due to very thin oxide layer. The corrosion resistance of PEO-treated samples increased with the concentration of Ca-GP in comparision with the untreated sample. In particular, the highest corrosion resistance was identified at the group of 0.04g Ca-GP through potentiodynamic polarization and immersion tests in saline solution (0.9 wt.%NaCl). During the immersion in saline solution, pH rapidly increased at the beginning of immersion period due to rapid corrosion, and then increase rate of pH decreased. However, the pH value in the SBF temporarily increased from 7.4 to 8.5 during the day, then decreased due to the inhibition of corrosion with HA(hydroxyapatite) formation.

• Nuclear Engineering and Technology
• /
• v.53 no.1
• /
• pp.282-293
• /
• 2021

This paper examines gamma-ray shielding properties of SBC-Bx glass system with the chemical composition of 40SiO₂-10B₂O₃-xBaO-(45-x)CaO- yZnO- zMgO (where x = 0, 10, 20, 30, and 35 mol% and y = z = 6 mol%). Mass attenuation coefficient (µ/ρ) which is an essential parameter to study gamma-ray shielding properties was obtained in the photon energy range of 0.015-15 MeV using PHITS Monte Carlo code for the proposed glasses. The obtained results were compared with those calculated by WinXCOM program. Both the values of PHITS code and WinXCOM program were observed in very good agreement. The (µ/ρ values were then used to derive mean free path (MFP), electron density (N_eff), effective atomic number (Z_eff), and half value layer (HVL) for all the glasses involved. Additionally, G-P method was employed to estimate exposure buildup factor (EBF) for each glass in the energy range of 0.015-15 MeV up to penetration depths of 40 mfp. The results reveal that gamma-ray shielding effectiveness of the SBC-Bx glasses evolves with increasing BaO content in the glass sample. Such that SBC-B35 glass has superior shielding capacity against gamma-rays among the studied glasses. Gamma-ray shielding properties of SBC-B35 glass were compared with different conventional shielding materials, commercial glasses, and newly developed HMO glasse. Therefore, the investigated glasses have potential uses in gamma shielding applications.

• Journal of Mushroom
• /
• v.20 no.1
• /
• pp.13-21
• /
• 2022

Cordyceps militaris, a well-known traditional Chinese medicine, has multiple health-promoting effects. It is used as a herbal remedy and health food in Asian countries. Cultured mycelia are often used as a substitute for natural C. militaris. In the present study, the mycelia and fruiting bodies of artificially cultured C. militaris were analyzed using a metabolomics approach. The protein and crude fat contents of the mycelia were substantially higher than those of the fruiting bodies. The top three abundant amino acids in the mycelia were proline (3.9 g/100 g), aspartic acid (2.9 g/100 g), and glutamic acid (2.7 g/100 g). The carbohydrate content was similar in the fruiting bodies and mycelia. Analysis revealed that both the fruiting bodies and mycelia are rich in phenolic compounds and exhibit antioxidant activity. Further, six metabolites were significantly different between the mycelia and fruiting bodies. The levels of Ca, glucose, Mg, and Se were higher in the mycelia than in the fruiting bodies. In contrast, mannitol and Zn were more abundant in the fruiting bodies. The current study provides a comprehensive metabolic profile of the mycelia and fruiting bodies of artificially cultured C. militaris. Such an exercise is potentially important for understanding the metabolism of C. militaris and facilitating the use of cultured mycelia as a supplement to C. militaris fruiting bodies in traditional Chinese medicine.

• The Korean Journal of Mycology
• /
• v.47 no.4
• /
• pp.359-371
• /
• 2019

To optimize the expression and secretion of ferritin protein associated with ion storage in the mushroom, Pleurotus eryngii, a recombinant secretion vector, harboring the ferritin gene, was constructed using a pPEVPR1b vector under the control of the CaMV 35S promoter and signal sequence of pathogen related protein (PR1b). The ferritin gene was isolated from the T-Fer vector following digestion with EcoRI and HindIII. The gene was then introduced into the pPEVPR1b secretion vector, and it was then named pPEVPR1b-Fer. The recombinant vector was transferred into P. eryngii via Agrobacterium tumefaciens-mediated transformation. The transformants were selected on MCM medium supplemented with kanamycin and its expression was confirmed by SDS-PAGE and western blotting. Expression of ferritin protein was optimized by modifying the culture conditions such as incubation time and temperature in batch and 20 L airlift type fermenter. The optimal conditions for ferritin production were achieved at 25℃ and after incubating for 8 days on MCM medium. The amount of ferritin protein was 2.4 mg/g mycelia, as measured by a quantitative protein assay. However, the signal sequence of PR1b (32 amino acids) seems to be correctly processed by peptidase and ferritin protein may be targeted in the apoplast region of mycelia, and it might not be secreted in the culture medium. The iron binding activity was confirmed by Perls' staining in a 7.5% non-denaturing gel, indicating that the multimeric ferritin (composed of 24 subunits) was formed in P. eryngii mycelia. Mycelium powder containing ferritin was tested as a feed additive in broilers. The addition of ferritin powder stimulated the growth of young broilers and improved their feed efficiency and production index.

• The Korean Journal of Ecology
• /
• v.24 no.2
• /
• pp.101-109
• /
• 2001

We created an environmental forest on the basis of ecological design around the incineration plant of Jindo Engineering and Construction Co., Ltd., which is located in Jeongwang-dong, Siheung-si, Kyunggi-do. To get ecological information of this site, physico-chemical properties of soil on salt marsh, which is located close to the syudy site and of forest soil transported from other sites for ecological restoration were analyzed. Texture of salt marsh and transported soils were loam and sandy loam, respectively. pH, organic matter, T-N, available P, and exchangeable K and Na contents of salt marsh and transported forest soils were 6.7 and 5.4, 4.1 and 0.4%, 1.0 and 0.3mg/g, 46.7 and 6.8ppm, 521 and 207ppm, and 3.8 and 0.5mg/g, respectively. Introduced plants were selected among the dominant species of forests and the species composing the potential natural vegetation around the present study site. Those plants were selected again by considering the tolerances to air pollution and to salt, and their availability. Selected trees were Pinus thunbergii, Sophora japonica, Celtis sinensis, Quercus aliena, Q. serrata, Q. dentata, and Q. acutissima. Selected sub-trees were Albizzia julibrissin, Koelreuteria poniculata, and Styrax japonica and shrubs were Rhododendron yedoense var. poukhanense, R. mucronulatum, Callicarpa japonica, Euonymus alatus, E. japonica, and R. schlippenbachii. On the other hand, introduction of herbs was not considered except for Liriope platyphylla, which was ornamentally planted in one site. Planting bed of mound type was adopted to provide the fine drainage system. Mound was designed to furnish litter, A, B, and C layers simuating the profile of forest soil. Slope of mound was mulched by rice straw of 2cm in thickness to prevent for sliding of litter and soil in cases of strong wind or heavy rain. Height of mound was designed to secure more than 1 m by combining A and B layers. Narrow zones, in which mound with stable slope degree cannot be prepared, was designed to equip the standard soil depth with the introduction of stone for supporting. On the other hand, plants with shallow root system were arranged in some zones, in which satisfactory soil depth cannot be ensured. Plants were arranged in the order of tree, sub-tree, and shrub from center to edge on the mound to make a mature forest of a dome shape in the future. Dispersion of plants was designed to be random pattern rather than clumped one. Problems on creation of the environmental forest by such ecological design were found to be management or inspection by non-specialized project operators and inspecting officers, and regulations for construction without ecological background. Alternative plans to solve such problems were suggested.

• Korean Journal of Environmental Agriculture
• /
• v.30 no.2
• /
• pp.173-178
• /
• 2011

BACKGROUND: Starfish is one of major sea invertebrates that have become a serious economic threat to aquacultural farms in Korea. Much effort has sacrificed to reduce the economic losses of the farms by predatory starfish, including developing and searching biological resources for medicinal and agricultural purposes. In the present study, we investigated aphicidal activity of the extracts from the starfish Asterina pectinifera against green peach aphid. METHODS AND RESULTS: Fresh starfishes were cut into small pieces, homogenized and soaked in methanol. The methanol extracts were centrifuged and the resulting supernatant was subjected to aphicidal activity assays and a series of silica gel column chromatography. More than 70% mortality of aphids were observed by the extracts at a concentration of 1,000 mg/L, exhibiting dose-dependent mortality. TOF-MS analyses detected polyhydroxysteroid as a main aphicidal compound from the starfish extracts. Transmission electronic microscopy could demonstrate that the extracts with polyhydroxysteroid caused aphids death by affecting their epicuticular membrane. CONCLUSION(s): This is the first report of aphicidal activity of the starfish Asterina pectinifera extracts against green peach aphid. Starfish biological resources may be used as a potential candidate for developing a new type natural insecticide.

• Korean Journal of Food Science and Technology
• /
• v.37 no.2
• /
• pp.199-205
• /
• 2005

Physicochemical quality characteristics of seed mashes were investigated for development of new creative breadmaking in bakery. Aridity of seed mashes fermented with Koji, lactic acid bacteria, and baker's yeast was slightly lower than those fermented with Koji and yeast. ${\alpha}-Amylase$, saccharifying amylase, and acidic protease activities of seed mash composed of water (560 mL) and Koji (400 g) were 0.26 SKB, 36 SP, and 645 HUT/g, respectively. Reducing sugar content of seed mash made with Koji increased up to 13.04% after 36 hr fermentation, then decreased drastically thereafter, whereas that of seed mashes made with Koji, yeast, and lactic acid bacteria increased up to 6.5% at 6 hr, decreased to 1 to 2.5% at 12 hr, and remained less than 0.7% after 18 hr fermentation. Total organic acid contents were 10.4-12.25mg/mL. Flavor compounds including ethyl acetate, ethyl caprylate, isoamyl acetate, and p-vinyl guaiacol were detected in seed mash fermented with Koji, yeast, and L. brevis. These results show use of seed mash fermented with Koji, S. cerevisiae, and lactic acid bacteria enhances bread flavor.