• Proceedings of the KAIS Fall Conference
• /
• 2011.12a
• /
• pp.364-366
• /
• 2011

Polyimide (PI) grafted magnesium hydroxide was synthesised and characterised by XRD, TGA, SEM analysis. XRD patterns of $PI/Mg(OH)_2$ carried the peaks due to $Mg(OH)_2$ with decreased intensity. The $CO_2$ adsorption capacity of $PI/Mg(OH)_2$ at $50^{\circ}C$ was found to be 14 wt% revealing chemisorption of $CO_2$ on $Mg(OH)_2$ which could be regenerated at higher temperatures.

• Food Science and Biotechnology
• /
• v.18 no.4
• /
• pp.996-1000
• /
• 2009

Sapium japonicum was extracted by a pressurized liquid. Operating parameters such as the type and the ratio of solvent to water, temperature, pressure, and number of extractions were investigated as the main variables that influence the extraction efficiencies of total phenolics (TP). MeOH extracted the highest level of TP as 50.4 mg GAE/g compared to 48.8 and 27.2 mg GAE/g with $H_2O$ and EtOH, respectively. $EtOH:H_2O$ (40:60, v/v) was found to be the best solvent for TP extraction as 90.3 mg GAE/g compared to 85.0 and 84.3 mg GAE/g in 40:60 and 60:40 of $MeOH:H_2O$, respectively. TP were increased with the increase of the number of extraction steps. TP content was increased by 11% as the extraction temperature was increased from 40 (97.4) to $50{\circ}C$ (108.3 mg GAE/g). The optimum extraction conditions of TP were; extraction solvent, $EtOH:H_2O$ (40:60, v/v); temperature, $50{\circ}C$; pressure, 10.2 MPa; 2 extraction steps.

• Proceedings of the Korean Society of Soil and Groundwater Environment Conference
• /
• 2005.10a
• /
• pp.158-159
• /
• 2005

This study showed that the highest temperature point of the Dongrae thermal spring in Pusan was moved to the north direction of the Dongrae fault as times goes by. The Br concentration(1.5mg/L) in Dongrae thermal waters indicated the influence of 2% seawater mixing. If the simple mixing without hydrochemical reaction occurs between seawater and thermal water, the concentration of Mg will be about 20mg/L. But the low concentration(0.1 mg/L) of Mg, contrary to high concentration(10 mg/L) of surrounding groundwater not affected by thermal water, suggested the thermal water, seawater and rock interactions. The calculation of saturation index(SI) by using the geochemical code of EQ3NR showed that the Mg in thermal groundwater, which was introduced by seawater, was removed by the precipitation of Antigorite (SI: log Q/K =71.753, $Mg_{48}Si_{24}O_{85}(OH)_{62}$) and Tremolite (SI: 8.463, $Ca_2Mg_5Si_8O_{22}(OH)_2$), Talc (SI: 6.409, $Mg_3Si_4O_{10}(OH)_2$), Dolomite (SI: 2.014, $CaMg(CO_3)_2$), Chrysotile (SI: 3.698, $Mg_3Si_2O_5(OH)_4$) in the crack of fault zone. The highest temperature point in the study area will move to north direction and stop in the Jangjun area without the input of seawater.

• Journal of Korean Society of Environmental Engineers
• /
• v.33 no.10
• /
• pp.731-738
• /
• 2011

In this study AOPs of $O_3/UV$ radiation, $O_3/Mg(OH)_2/UV$ radiation and $O_3/MgO/UV$ radiation system for phenol treatment in aqueous solution was performed in a laboratory scale circulating batch reacter. Flow rate of ozone 1.0 L/min, ozone concentrations $150{\pm}10mg/L$ was maintained constantly at the above-mentioned oxidation processes. During the oxidation processes the $COD_{Cr}$ and TOC was measured in the composition. The pseudo first-order rate constants of the processes was $5.12{\times}10^{-5}$, $1.19{\times}10^{-4}$ and $1.79{\times}10^{-4}sec^{-1}$, and the activation energy was 3.03, 1.79 and $2.32kcal{\cdot}mol^{-1}$ at $20^{\circ}C$, respectively. It was found that both $Mg(OH)_2$ and MgO had remarkable accelerations on degradation of phenol and removal of COD in water. On this basis, $O_3/MgO/UV$ system is an effective and feasible routes for catalytic ozonation of phenol in water.

• Clean Technology
• /
• v.20 no.1
• /
• pp.42-50
• /
• 2014

In this study, the $Mg(OH)_2$ slurry was made form ferro-nickel slag and then used for $CO_2$ sequestration. The experiments were in the order as leaching step, precipitation, carbonation experiments. According to the leaching results, the optimal leaching conditions were $H_2SO_4$ concentration of 1 M and the temperature of 333 K. In the $Mg(OH)_2$ manufacturing step, NaOH was added to increase the pH upto 8, the first precipitation was confirmed as $Fe_2O_3$. After removal the first precipitation, the pH was upto 11, the $Mg(OH)_2$ was generated by XRD analysis. The $Mg(OH)_2$ slurry was used for $CO_2$ sequestration. The pseudo-second-order carbonation model was used to apply for $CO_2$ sequestration. The $CO_2$ sequestration rate was increased by the $CO_2$ partial pressure and temperature. However, $CO_2$ sequestration rate was decreased when temperature upto 323 K. After $CO_2$ sequestrated by $Mg(OH)_2$, the $CO_2$ can be sequestrated stable as $MgCO_3$. This study also presented optimal sequestration condition was the pH upto 8.38, the maximum $MgCO_3$ can be generated. This study can be used as the basic material for $CO_2$ sequestration by ferro-nickel slag at pilot scale in the future.

• Journal of Powder Materials
• /
• v.27 no.5
• /
• pp.401-405
• /
• 2020

Magnesium hydroxide sulfate hydrate (MHSH) whiskers were synthesized via a hydrothermal reaction by using MgO as the reactant as well as the acid solution. The effects of the H₂SO₄ amount and reaction time at the same temperature were studied. In general, MHSH whiskers were prepared using MgSO₄ in aqueous ammonia. In this work, to reduce the formation of impurities and increase the purity of MHSH, we employed a synthesis technique that did not require the addition of a basic solution. Furthermore, the pH value, which was controlled by the H₂SO₄ amount, acted as an important factor for the formation of high-purity MHSH. MgO was used as the raw material because it easily reacts in water and forms Mg⁺ and MgOH⁺ ions that bind with SO₄^2- ions to produce MHSH. Their morphologies and structures were determined using X-ray diffraction (XRD) and scanning electron microscopy (SEM).

• Ocean and Polar Research
• /
• v.35 no.4
• /
• pp.273-280
• /
• 2013

The proximate composition, free amino acid composition and mineral contents from Undariopsis peterseniana were determined, and the antioxidant activities of ethanol (EtOH) and hot water extracts of U. peterseniana were investigated using DPPH (1,1-diphenyl-1-picrylhydrazyl), ABTS (2,2'- azino-bis(3-ethylbenzothiazoline-6-sulphonic acid)) radical scavenging effects and reducing power. The contents of moisture, ash, protein, lipid and carbohydrate were 12.5%, 23.1%, 9.7%, 0.2% and 54.5%, respectively, and alginic acid content was 12.3%. The major free amino acid contents were alanine, phenylalanine, aminoethanol, valine, glutamic acid and phosphoserine. Ca (1589.1 mg) was the largest mineral followed by Na (344.6 mg), Mg (74.3 mg), Zn (10.2 mg) and Fe (1.5 mg). The total phenolic contents of EtOH and hot water extracts were exhibited at 15.7 and 4.3 mg GAE/g sample, respectively. The antioxidant activity of EtOH extract exhibited strong ABTS and DPPH radical scavenging activities with reducing power, and hot water extract also demonstrated strong ABTS radical scavenging effects. Therefore, the results of this study suggest that U. peterseniana contained an abundance of naturally occurring nutrients (free amino acids and minerals), and the strong antioxidant activities of EtOH and hot water extracts from U. peterseniana could be good sources of natural antioxidants for healthcare products.

• Journal of Energy Engineering
• /
• v.9 no.2
• /
• pp.123-129
• /
• 2000

Mg(OH)$_2$를 흡수제로 이용한 습식탈황에서 페슬러리에 대한 산화반응 특성을 고려하였다. SO3-2 전환율 (MgSO3 폐슬러리의 산화반응 전환율) 과 산소의 물질전달특성을 고찰하기 위해 회분식 및 연속식 실험을 수행하였따. 3리터 용량을 갖는 직사각형모양의 아크릴 반응기에서 공기/슬러리 공급비(20-60) , 수리학적 체류시간(HRT)(1-3hr), SO3-2 유입농도(1000-3000ppm)등의 변화조건에서 실험이 행하여졌다. 실험결과 SO3-2 전환율은 공기공급량과 체류시간에 비례하여 증가하였다. 또한 슬러리 공급에 대한 최적공기공급비 0.02ι/(ι.ppm)에서 MgSO3 폐슬러리는 90%이상 산화되었다.

• Journal of the Korean Society of Safety
• /
• v.25 no.3
• /
• pp.45-52
• /
• 2010

The purpose of this study is application to flame retardant powder coating(FRPC) material consisting of ammonium polyphosphate(APP) and magnesium hydroxide($Mg(OH)_2$) as a halogen free flame retardant into thermoplastic resin(LDPE-g-MAH). For improvement of adhesion, LDPE-g-MAH was synthesized from low density polyethylene(LDPE) and maleic anhydride(MAH). The mechanical properties as melt flow index, pencil hardness, cross-hatch adhesion and impact resistance of FRPC were measured. Also, the limited oxygen index(LOI) values were measured 17.3vol%, 31.1vol% and 33.7vol% for LDPE-g-MAH, FRPC-3(APP 15wt%, $Mg(OH)_2$ 15wt%) and FRPC-5(APP 30 wt%), respectively. The thermo gravimetry/differential thermal analysis(TG/DTA) of FPRC-3 was observed endothermic peak at $340^{\circ}C$ and $450^{\circ}C$, it was confirmed predominant thermal stability though the wide temperature range by APP and $Mg(OH)_2$. It was showed V-0 grade for FRPC-3 and FRPC-4(APP 20wt%, $Mg(OH)_2$ 10wt%) that a char formation and drip suppressing effect, and combustion time reduced by UL94(vertical burning test). It was confirmed that flame retardancy was improved with the synergy effect because of char formation by APP and $Mg(OH)_2$.

• Journal of the Mineralogical Society of Korea
• /
• v.28 no.4
• /
• pp.333-341
• /
• 2015

As results of X-ray diffraction analysis, samples of asbestos and soil were composed maily of dolomite ($CaMg(Co_3)_2$, tremolite ($Ca_2Mg_5Si_{18}O_{22}(OH)_2$), actinolite ($Ca(Mg,\;Fe)_6Si_8O_{22}(OH)_2$), talc ($Mg_3Si_4O_{10}(OH)_2$), calcite ($CaCO_3$) and small amounts of quartz ($SiO_2$) and clay minerals. The average size of asbestos fibers was about $100{\mu}m$ and maximum of some asbestos was $250.0{\mu}m$ in length. The aspect ratio of asbestos fiber were over 3 : 1 and inclined extinction in the range of $8.0-19.5^{\circ}$. Single isolated fragments of asbestos are probably fiber and acicula form in crystal edge along the cleavage plane. Tremolite that composed main asbestos mineral in rock and soil around Dong-a mine is higher content of Fe than actinolite asbestos.