• 분석과학
• /
• 제6권3호
• /
• pp.275-282
• /
• 1993

지르콘사 광물에서 지르코니아를 회수하기 위하여 지르콘사를 분해 반응시킨 소성산물 중의 $SiO_2$와 $ZrO_2$를 DC arc source를 이용한 직독식 분광기로 동시 분석하였다. 순수한 금속산화물을 혼합하여 합성표준시료를 만들고 완충제(흑연)와 융제($Li_2B_4O_7$)의 혼합비를 조절하면서 최적의 들뜸조건을 선정하였다. 완충제와 흑연의 비를 0.22:1로 하고 시료와의 혼합비를 40배로 하였을 때 가장 좋은 들뜸조건을 얻을 수 있었다. 분석 결과의 표준편차는 $SiO_2$는 1.3%, $ZrO_2$는 4.9%였다.

• 한국전기전자재료학회논문지
• /
• 제21권3호
• /
• pp.227-231
• /
• 2008

In this study, in order to improve the electrical properties of low temperature sintering piezoelectric ceramics, $[0.05Pb(Zn_{1/2}W_{1/2})-0.07Pb(Mn_{1/3}Nb_{2/3})-0.088Pb(Zr_{0.48}Ti_{0.52})]O_3$(abbreviated as PZW-PMN-PZT) ceramic systems were fabricated using $Bi_2O_3$, CuO and $Li_2CO_3$ as sintering aids and then their piezoelectric and dielectric properties were investigated according to the amount of $Li_2CO_3$ and post-annealing process. Post-annealing process enhanced all physical properties except for mechanical quality factor (Qm). 0.2 wt% $Li_2CO_3$ added and post-annealed specimen showed the excellent values suitable for low loss piezoelectric actuator application as follow: the density = 7.86 $g/cm^3$ electromechanical coupling factor (kp) = 0.575, piezoelectric constant $d_{33}$ = 370 pC/N, dielectric constant ($\varepsilon_r$) = 1546, and mechanical quality factor (Qm) = 1161, respectively.

• 한국산학기술학회논문지
• /
• 제8권5호
• /
• pp.995-999
• /
• 2007

저온 소결용 압전 세라믹 소결체의 치밀화에 미치는 첨가제의 영향을 조사하기 위하여 $PbZrTiO_3$(PZT) 분말을 제조하였으며, 이 PZT 분말을 이용하여 제조한 압전 세라믹스의 치밀화에 미치는 첨가제의 영향을 조사하였다. 첨가제는 $wB_2O_3-xBi_2O_3-zCuO$와 $LiBiO_2-CuO$ 두 종류가 제조되었으며 이 들 첨가제의 양을 변화 시켜 효과를 조사하였다. PZT 분말에 소결조제로서 1wt.% 의 $LiBiO_2-CuO$를 첨가하여 시편을 제조한 후, $800{\sim}1200^{\circ}C$까지의 온도 범위에서에서 소결한 결과 $900^{\circ}C$에서 최고의 소결밀도를 나타내었다. 소결된 압전체의 결정상을 분석하기 위하여 X-선회절분석을 시행하였으며, $900^{\circ}C$의 저온에서 소결한 $PbZrTiO_3$의 시편의 미세조직을 관찰하기 위하여 주사전자현미경(SEM)을 이용하였다. X-선 회절분석에서는 잘 발달된 PZT 상이 나타났으며, SEM 관찰 결과 평균입경은 $2{\sim}4\;{\mu}m$의 페로브스카이트 결정으로 균일하고 치밀한 조직을 나타내었으며, 높은 소결성은 첨가제에 의한 액상소결에 기인한다.

• 한국재료학회지
• /
• 제29권3호
• /
• pp.150-154
• /
• 2019

This study investigates the effect of MnO2 and CuO as acceptor additives on the microstructure and piezoelectric properties of $0.96(K_{0.5}Na_{0.5})_{0.95}Li_{0.05}Nb_{0.93}Sb_{0.07}O_3-0.04BaZrO_3$, which has a rhombohedral-tetragonal phase boundary composition. $MnO_2$ and CuO-added $0.96(K_{0.5}Na_{0.5})_{0.95}Li_{0.05}Nb_{0.93}Sb_{0.07}O_3-0.04BaZrO_3$ ceramics sintered at a relatively low temperature of $1020^{\circ}C$ show a pure perovskite phase with no secondary phase. As the addition of $MnO_2$ and CuO increases, the sintered density and grain size of the resulting ceramics increases. Due to the difference in the amount of oxygen vacancies produced by B-site substitution, Cu ion doping is more effective for uniform grain growth than Mn ion doping. The formation of oxygen vacancies due to B-site substitution of Cu or Mn ions results in a hardening effect via ferroelectric domain pinning, leading to a reduction in the piezoelectric charge coefficient and improvement of the mechanical quality factor. For the same amount of additive, the addition of CuO is more advantageous for obtaining a high mechanical quality factor than the addition of $MnO_2$.

• 한국재료학회지
• /
• 제31권11호
• /
• pp.614-618
• /
• 2021

As the size of market for electric vehicles and energy storage systems grows, the demand for lithium-ion batteries (LIBs) is increasing. Currently, commercial LIBs are fabricated with liquid electrolytes, which have some safety issues such as low chemical stability, which can cause ignition of fire. As a substitute for liquid electrolytes, solid electrolytes are now being extensively studied. However, solid electrolytes have disadvantages of low ionic conductivity and high resistance at interface between electrode and electrolyte. In this study, Li₇La₃Zr₂O₁₂ (LLZO), one of the best ion conducting materials among oxide based solid electrolytes, is fabricated through RF-sputtering and various electrochemical properties are analyzed. Moreover, the electrochemical properties of LLZO are found to significantly improve with co-sputtered Li₂O. An all-solid thin film battery is fabricated by introducing a thin film solid electrolyte and an Li₄Ti₅O₁₂ (LTO) cathode; resulting electrochemical properties are also analyzed. The LLZO/Li₂O (60W) sample shows a very good performance in ionic conductivity of 7.3×10^-8 S/cm, with improvement in c-rate and stable cycle performance.

• Journal of the Korean Physical Society
• /
• 제73권10호
• /
• pp.1535-1540
• /
• 2018

In this study, we prepared and characterized Nb-doped $Li_7La_3Zr_{2-x}O_{12}$ (LLZNO) powder and pellets with a cubic garnet structure by using a modified sol-gel synthesis and hot pressing. LLZNO powder with a very small grain size and cubic structure without secondary phases could be obtained by using a synthesis method in which Li and La sources in a propanol solvent were mixed together with Zr and Nb sources in 2-methoxy ethanol. A pure cubic phase LLZNO pellet could be fabricated from the prepared LLZNO and an additional 6-wt% of $Li_2CO_3$ powder by hot pressing at $1050^{\circ}C$ and 15.8 MPa. The hot-pressed LLZNO pellet with a relative density of 99% exhibited a very dense surface morphology. The total Li ionic conductivity of the hot-pressed LLZNO was $7.4{\times}10^{-4}S/cm$ at room temperature, which is very high level compared to other reported values. The activation energy for ionic conduction was estimated to be 0.40 eV.

• 한국분말재료학회지
• /
• 제8권3호
• /
• pp.163-167
• /
• 2001

A bulk porous $CaZrO_3/MgO$ composite with plantinum nano-dispersion was synthesized in air atmosphere through the combination of several in situ reactions, including the pyrolysis of $PtO_2$. A mixture of $CaMg(CO_3)_2$(dolomite), $ZrO_2$, $PtO_2$ and LiF (0.5 wt%, as an additive) was cold isostatically pressed at 200 MPa and sintered at $1100^{\circ}C$ for 2 h. The porous $CaZrO_3/MgO/Pt$ composite ($CaZrO_3/MgO$ : Pt=99 : 1 in volume) had a uniformly open-porous structure (porosity: 56%) with three-dimensional (3-D) network and a narrow pore-size distribution, similarly to the porous $CaZrO_3/MgO$ composites reported before. Catalytic Properties (viz., NO direct decomposition and NO reduction by $C_2H_4$) of the $CaZrO_3/MgO/Pt$ composite were investigated up to $900^{\circ}C$. In the absence of oxygen, the NO conversion rate reached ~52% for the direct decomposition and ~100% for the reduction by $C_2H_4$, respectively. The results suggest the possibility of the porous composite as a multifunctional filter, i.e., simultaneous hot gas-filtering and $de-NO_x$ in one component.

• Transactions on Electrical and Electronic Materials
• /
• 제16권3호
• /
• pp.130-134
• /
• 2015

This research proposes the use of a composition modulated (ZrO₂)_x(Al₂O₃)_1-x film as a charge trapping layer for charge trap flash memory; this is possible when the Zr (Al) atomic percent is controlled to form a variable bandgap as identified by the valence band offsets and electron energy loss spectrum measurements. Compared to memory devices with uniform compositional (ZrO₂)_0.1(Al₂O₃)_0.9 or a (ZrO₂)_0.92(Al₂O₃)_0.08 trapping layer, the memory device using the composition modulated (ZrO₂)_x(Al₂O₃)_1-x as the charge trapping layer exhibits a larger memory window (6.0 V) at the gate sweeping voltage of ±8 V, improved data retention, and significantly faster program/erase speed. Improvements of the memory characteristics are attributed to the special energy band alignments resulting from non-uniform distribution of elemental composition. These results indicate that the composition modulated (ZrO₂)_x(Al₂O₃)_1-x film is a promising candidate for future nonvolatile memory device applications.

• 한국결정성장학회지
• /
• 제3권2호
• /
• pp.176-184
• /
• 1993

$Li_2O-Al_2O_3-SiO_2$계 유리조성에서, 특히 주결정상으로 $\beta$-spodumene을 석출시킬 수 있는 조성영역에서 $P_2O_5, TiO_2, ZrO_2$ 등을 첨가하여 용융한 후 소결법을 이용하여 이론밀도에 가까운 결정화 유리를 만들기 위한 최적 열처리 조건, 유리 분말의 입도 변화에 따란 영향과 그 때의 물성을 시차열분석, X-선 회절분석, 비중 측정, 열팽창 측정, 전자현미경 관찰 등을 통하여 연구하였다. $P_2O_5$를 첨가하여 소결법으로 결정화할 때 소결을 증진시키는 효과가 있었으며 9wt% 첨가한 경우가 가장 치밀한 것으로 나타났다. 최적의 열처리 조건은 $740^{\circ}C$에서 소결하여 치밀화를 시키고$ 950^{\circ}C$에서 결정화를 시켰을 때로서 상대밀도는 90% 이상이었으며 열팽창계수는 $-1{\times}10^{-7}/^{\circ}C$ 정도로서 부팽창인 것으로 나타났다.

• 한국결정성장학회지
• /
• 제2권2호
• /
• pp.20-32
• /
• 1992

$Na_2O-CaO-MgO-Al_2O_3-SiO_2$계를 기본조성으로 하여 $Na_2O$에 $Li_2O 0.05wt%, $K_2O$를, CaO에 MgO 12.0wt%, ZnO 6.0%를 각각 치환하여 조성을 선정하였다. 기본 유리조성의 결정상은 wollastonite이고, 치환된 조성들은 diopside, diopside.tremolite의 혼정이 나타났다. $Na_2O$를 $Li_2O$로 치환한 시편은 열팽창계수가 감소하였지만 CaO를 ZnO로 치환한 시편은 열팽창 계수가 증가하였다. 곡강도에 있어서는 치환에 따라 모두 증가시켰다. 핵행성제로 $ZrO_2와 $CaF_2$를 각각 1~2wt%의 변화를 시켜본 결과 핵형성제 $ZnO_2$와 $CaF_2$가 1:1, 1:2인 시편은 $1000~1050^{\circ}C$온도에서 급격한 결정성장을 보였으며 1:2시편이 가장 낮은 열팽창 계수값을 나타냈다. 곡강도는 모두 $1000~1050^{\circ}C$의 결정화 온도 범위에서 높은 강도를 나타내었다. 결정화에 필요한 활성화 에너지는 Ozawa와 Kissinger식으로 plot하여 각각 55.24kcal/mol과 53.05kcal/mol이다.