• Journal of the Korean Ceramic Society
• /
• v.18 no.3
• /
• pp.187-191
• /
• 1981

The effect of additions, $TiO_2$ and $ZrO_2$ as nucleant on the base glass which composition was determined to 0.97 $Li_2O-Al_2O_3-SiO_2$ has been investigated by means of D.T.A., X-ray diffraction and dilatation. $TiO_2$ and $ZrO_2$ as nucleant were added 0.06mole, in which ratios of $TiO_2$/$ZrO_2$ were varied 1/0, 2/1, 1/1, 1/2 and 0/1. The crystalline phases were appeared to $\beta$-spodumene as principal, $\beta$-eucryptite and $ZrO_2$ as secondary, regardless of nucleant variations. The crystallinity of the crystallized glass added $TiO_2$, $ZrO_2$ mixture as nucleant was higher than that of the glass added $TiO_2$ or $ZrO_2$ only. The crystallinity of the glass added $TiO_2$/$ZrO_2$ =1/1 was highest. Increasing the addition of $ZrO_2$, it has been observed that the crystal growing temperature became higher.

• Proceedings of the Korean Nuclear Society Conference
• /
• 1997.05b
• /
• pp.195-200
• /
• 1997

핵융합로 증식재용 r-LiAlO$_2$, Li$_2$ZrO$_3$, Li$_2$TiO$_3$ 분말을 자발착화 연소반응법으로 합성하였다. LiAlO$_2$와 달리 Li$_2$ZrO$_3$ 와 Li$_2$TiO$_3$는 가열하는 동안 침전물이 생겼지만 카르복실산기만을 지닌 구연산과 아민기만을 지닌 우레아를 화학정량의 조성으로 혼합한 연료로 쉽게 분말을 합성할 수 있었다. LiAlO$_2$나 Li$_2$TiO$_3$분말은 별도의 하소 공정이필요없이 원하는 결정상이 형성되었으며, Li$_2$ZrO$_3$분말은 Li이 과량인 상이 형성되므로 110$0^{\circ}C$에서 하소하여 원하는 상을 얻었다. 합성된 Li계 산화물 분말은 비표면적 10~17 $m^2$/g으로 약 150 nm정도의 입자크기를 갖는 미세한 입자이었다.

• Proceedings of the KAIS Fall Conference
• /
• 2010.11a
• /
• pp.110-114
• /
• 2010

Li-incorporated mesoporous $TiO_2$ materials with various pore-sized istributions were synthesized by using triblockcopolymers via a sol-gel process in a queous solution. The properties of the se materials were characterized by HR-TEM, XRD, and BET analysis. All particles have spherical morphology with a diameterrange of $1-3{\mu}m$. The mesoporous $TiO_2$ materials calcined at $400^{\circ}C$ and their specific surface area, average pore size and crystallite sizes were 210 $m^2g^{-1}$, 6.4 nm and 8.8 nm respectively. The Li-incorporated mesoporous $TiO_2$ were tested for $CO_2$ adsorption and its adsorption capacity is 90mg/g. The Li-incorporated mesoporous $TiO_2$ ar eobserved to be thermally stable, recyclable and greens or bent for $CO_2$ capture. The effect of bimetallic $ZrLiTiO_2$ is also studied for $CO_2$ adsorption.

• Korean Journal of Materials Research
• /
• v.9 no.10
• /
• pp.1041-1046
• /
• 1999

(Zr(sub)0.8Sn(sub)0.2)$TiO_4$세라믹스와 소결조제로서 ($B_2$$O_3$.Li$_2$O)의 첨가에 따른 마이크로파 유전특성 및 미세구조에 미치는 영향에 대하여 연구하였다. 1.0 mol.% $Sb_2$O(sub)5를 첨가하고 130$0^{\circ}C$에서 5시간 소결한 (Zr(sub)0.8Sn(sub)0.2)$TiO_4$세라믹스의 경우 ($B_2$$O_3$.Li$_2$O)첨가량 증가에 따라 치밀화 및 결정립 성장에 의해 유전상수와 Q.f값은 증가하여 첨가량이 0.35wt.%에서 최대값인 38과 59,000을 각각 나타내었으며, 0.50wt.% 이상 첨가한 경우에서는 제 2상의 생성으로 인하여 감소하였다. 1.0 mol% Sb$_2$O(sub)5와 0.35wt.% ($B_2$$O_3$.$Li_2$O)를 첨가한 (Zr(sub)0.8Sn(sub)0.2)TiO$_4$세라믹스를 125$0^{\circ}C$와 135$0^{\circ}C$에서 5시간 소결한 경우에는 각각 미반응 TiO$_2$의 존재와 과대입자성장에 의한 결정립내기공의 생성으로 인하여 마이크로파 유전특성은 저하되었다.

• Journal of the Korean Ceramic Society
• /
• v.13 no.1
• /
• pp.30-34
• /
• 1976

In general the chemical composition of glass ceramics in Li2O-Al2O3-SiO2 system is similar to the composition of $\beta$-spodumene (Li2O-Al2O3-4SiO2). With the object to manufacture the glass ceramics which can be produced in the domestic pot the composition of glass was so settled at 1.0 Li2O.0.9Al2O3.6.0SiO2 in order to reduce the contents of Li2O, to prevent the corrosion of the pot and to decrease the cost of raw materials. 0.2 mole and 0.1 mole of the mixture of TiO2 and ZrO2 as nucleants were added to the basic composition of 1.0 Li2O-0.9Al2O3-6.0SiO2. Each sample was divided into two kinds with a TiO2/ZrO2 ratio of 2 to 1 and the other with a TiO2/ZrO2 ratio fo 1 to 1. Thermal expansion coefficient, the most important property of glass ceramics, was tested. The softening point and the melting point of the samples were observed by the use of a heating microscope. The results obtained were as follows. The manufacturing of glass ceramics seems to be possible in the industrial plant using the domestic pot. 1) The composition of the glass which can be melted in the domestic pot process was near 1.0 Li2O.0.9Al2O3.6.0SiO2. 2) The temperature range of crystal creation and crystal growth was between 850-94$0^{\circ}C$, and 5 hours holding the samples at the temperature range was enough to crystallize them. The major crystal was $\beta$-spdumene and there existed petalite partialy. 3) The thermal expansion coefficient fo the crystallized glass was negative. 4) The deforming point of the crystallized glass was 1435$^{\circ}C$.

• Analytical Science and Technology
• /
• v.10 no.6
• /
• pp.439-444
• /
• 1997

Twelve kinds (1set) standard materials of chemical ingredients of lead zirconate titanate[$Pb(ZrTi)O_3$] have been developed in order to determine fast and accurate measurement of X-ray fluorescence spectrometry. Especially, we used diluted(ahout sixteen times) filling compound($Li_2B_4O_7/LiBO_2=4/1$) to consider removal effect of matrix, storage convenience, and homogenous characteristics. As a result from the four different laboratories, we obtained extremly good agreement about the standard curve on twelve standard materials which containing eleven elements, PbO, $ZrO_2$, $TiO_2$, SrO, $WO_3$, $La_2O_3$, $Cr_2O_3$, MgO, $Nb_2O_5$, and $MnO_2$. The correlation factor of standard curve was over 0.998. However, ZnO has relatively low correlation factor, 0.977, because the concentration was 10ppm lower than other original materials. This analysis reveals that ZnO has shown the poor linearity as well as low fluorescence intensity. In present work, XRF standard materials are useful for determining a rapid and accurate results for major and minor elements concentration among PZT.

• Journal of the Korean Chemical Society
• /
• v.27 no.4
• /
• pp.273-278
• /
• 1983

With the synthetic standards, valuable metals $(Ta_2O_5, Nb_2O_5, TiO_2, SnO_2$, and $ZrO_2$) in the tin slags have been determined by the x-ray fluorescence spectrometry. The powder sample and the standards are homogeneously mixed with anhydrous $Li_2B_4O_7$ and La_2O_3$ in weight ratio of 15 : 42 : 3 respectively. The mixed material is fused at $1,150^{\circ}C$ for 30 minutes to be changed into the glass bead. The bead is ground to (-) 325 mesh size and pelletized. The analytical results obtained in this work are consistent with the data obtained by other common methods within allowable error range. The standard deviation for $Ta_2O_5$ in PTS-H sample is 0.12 % at level of 3.40 % content.

• Journal of the Korean Crystal Growth and Crystal Technology
• /
• v.6 no.2
• /
• pp.275-285
• /
• 1996

The effect of heat-treatment on catalytic crystallization in $LI_2O-Al_2O_3-SiO_2$ glass system over its glass transition temperature was investigated. Glass composition $4Li_2O{cdot}22AL_2O_3{cdot}66SiO_2{cdot}2TiO_2{cdot}2.5ZrO_2{cdot}1.5P_2O_5{cdot}1.0Na_2O{cdot}1.0As_2O_3$ (wt%) was selected and heat-treated at different heating conditions to obtain transparent glass-ceramic. Nucleation and crystallization behaviour of this composition were estimated by differential thermal analysis (DTA) and X-ray diffractometer (XRD) and its thermal expansion coefficients were measured by Dilatometer. As a result, glass transition temperature was $730^{\circ}C$ and two maximum nucleation temperatures were estimated at $730^{\circ}C$ and 82$0^{\circ}C$ using JMA(Johson-Mehl-Avrami) equation by DTA. $ZrTiO_4$ $\beta$-Quartz solid solution and $\beta$-Spodumene crystals were identified by XRD. The optimum crystallization temperature was 92$0^{\circ}C$ and three step heating schedule was expected to be useful to obtain transparent glass-ceramic.

• Proceedings of the Korean Institute of Electrical and Electronic Material Engineers Conference
• /
• 2007.06a
• /
• pp.307-307
• /
• 2007

압전액츄에이터 및 초음파진동자는 전자제품의 소형화 및 경량화, 의료기기, 모바일기기 및 소형로붓의 발전에 힘입어 그 활용범위가 넓게 확장되고 있다. 1960년 Smolenski등에 의해 $A(B_1,B_2)O_3$형 복합 페로브스카이트 구조를 갖는 강유전성 세라믹스에 대한 연구가 시작된 이래 $Pb(Co,Nb)O_3-Pb(Zr,Ti)O_3$, $Pb(Zn,Nb)O_3-Pb(Zr,Ti)O_3$, $Pb(Mg,Nb)O_3-Pb(Zr,Ti)O_3$ 등 3성분계 세라믹스의 유전, 압전 및 강유전 특성에 대한 많은 연구가 진행되어 왔다. 그러나 압전성이 우수한 세라믹스들은 Pb가 포함되어 있기 때문에 $1000^{\circ}C$ 이상에서 PbO가 급격하게 휘발되는 성질에 따라서 조성의 변동이 생겨 재현성이 어려우며 이를 방지하기 위하여 과잉 PbO를 첨가시키기 때문에 환경오염뿐만 아니라, 경제적인 측면에서도 많은 문제점을 가지고 있다. 소결조제를 이용한 산화물 첨가법은 PbO의 휘발을 억제하는 저온소결 방법중 가장 효과적인 방법으로 알려져 있다. 따라서, 본 연구에서는 적층형 압전액츄에이터로 사용하기위한 저온소결 압전세라믹스를 개발하기 위하여 PZN-PZT세라믹스에 $Li_2CO_3$, $Bi_2O_3$, CuO 를 소결조제로 사용하여 $Li_2CO_3$의 첨가량 변화에 따른 압전 및 유전 특성을 관찰하였다.

• Proceedings of the Korean Institute of Electrical and Electronic Material Engineers Conference
• /
• 2005.11a
• /
• pp.11-12
• /
• 2005

[ $Pb(Zr_{0.48}Ti_{0.52})O_3$ ] (PZT) thin films were deposited on Pt(111)/Ti/$SiO_2$/Si substrates by pulsed laser deposition. In order to study the effect of different laser pulse repetition rate on the dielectric and ferroelectric properties of PZT thin films,2 Hz and 5 Hz of laser pulse repetition rate were selected. We compared the results of XRD pattern, dielectric constant and hysteresis characteristics. From the experimental data, we found that the electrical properties of PZT thin films which grown ar 2 Hz of laser pulse repetition rate were better than those which grown at 5 Hz of laser pulse repetition rate.