• Journal of the Korean Chemical Society
• /
• v.40 no.4
• /
• pp.243-248
• /
• 1996

New routes have been developed for the practical syntheses of dl-Muscone(1) employing cyclopentadecanone(2) as the starting material. In this experiment, addition of bromine to cyclopentadecanone in dried E. Ether solution with a trace of $AlCl_3$ as the catalyst were produced 2-bromocyclopentadecanone(3). This process was enhanced formation of regioselective enolate anion at $C_2$ position. 2-Bromocyclopentadecanone was put into $Li_2CO_3$-LiBr-DMF solution at 140∼150$^{\circ}C$, were produced trans- and cis-2-cyclopentadecen-1-one(4) mixture. Other by-products were reduced by control of reaction temperature and time. Trans- and cis-2-cyclopentadecen-1-one(4) mixture was directly put into dried E. Ether solvent and induce to react dropwise with $CH_3MgBr-Cu_2Cl_2$ complex, all of them got into 1,4-addition, dl-Muscone (1) was formed as the result. Conculsion, through three steps procedure from cyclopentadecanone(2) to dl-Muscone(1), the pure dl-Muscone was obtained with the high proportion of 85%, and synthetic cost was able to be much lower than any other conventional methods as there were no chemical separating steps.

• JSTS:Journal of Semiconductor Technology and Science
• /
• v.14 no.1
• /
• pp.53-60
• /
• 2014

Different kinds of post-deposition annealing (PDA) by a rapid thermal process (RTP) are used to enhance the field-effect passivation of $Al_2O_3$ film in crystal Si solar cells. To characterize the effects of PDA on $Al_2O_3$ and the interface, metal-insulator semiconductor (MIS) devices were fabricated. The effects of PDA were characterized as functions of RTP temperature from $400{\sim}700^{\circ}C$ and RTP time from 30~120 s. A high temperature PDA can retard the passivation of thin $Al_2O_3$ film in c-Si solar cells. PDA by RTP at $400^{\circ}C$ results in better passivation than a PDA at $400^{\circ}C$ in forming gas ($H_2$ 4% in $N_2$) for 30 minutes. A high thermal budget causes blistering on $Al_2O_3$ film, which degrades its thermal stability and effective lifetime. It is related to the film structure, deposition temperature, thickness of the film, and annealing temperature. RTP shows the possibility of being applied to the PDA of $Al_2O_3$ film. Optimal PDA conditions should be studied for specific $Al_2O_3$ films, considering blistering.

• Journal of the Mineralogical Society of Korea
• /
• v.29 no.2
• /
• pp.59-71
• /
• 2016

To investigate the sorption characteristics of Cs, which is one of the major isotopes of nuclear waste, on natural zeolite chabazite, XRD, EPMA, EC, pH, and ICP analysis were performed to obtain the informations on chemical composition, cation exchange capacity, sorption kinetics and isotherm of chabazite as well as competitive adsorption with other cations ($Li^+$, $Na^+$, $K^+$, $Rb^+$, $Sr^{2+}$). The chabazite used in this experiment has chemical composition of $Ca_{1.15}Na_{0.99}K_{1.20}Mg_{0.01}Ba_{0.16}Al_{4.79}Si_{7.21}O_{24}$ and its Si/Al ratio and cation exchange capacity (CEC) were 1.50 and 238.1 meq/100 g, respectively. Using the adsorption data at different times and concentrations, pseudo-second order and Freundlich isotherm equation were the most adequate ones for kinetic and isotherm models, indicating that there are multi sorption layers with more than two layers, and the sorption capacity was estimated by the derived constant from those equations. We also observed that equivalent molar fractions of Cs exchanged in chabazite were different depending on the ionic species from competitive ion exchange experiment. The selectivity sequence of Cs in chabazite with other cations in solution was in the order of $Na^+$, $Li^+$, $Sr^{2+}$, $K^+$ and $Rb^+$ which seems to be related to the hydrated diameters of those caions. When the exchange equilibrium relationship of Cs with other cations were plotted by Kielland plot, $Sr^{2+}$ showed the highest selectivity followed by $Na^+$, $Li^+$, $K^+$, $Rb^+$ and Cs showed positive values with all cations. Equilibrium constants from Kielland plot, which can explain thermodynamics and reaction kinetics for ionic exchange condition, suggest that chabazite has a higher preference for Cs in pores when it exists with $Sr^{2+}$ in solution, which is supposed to be due to the different hydration diameters of cations. Our rsults show that the high selectivity of Cs on chabazite can be used for the selective exchange of Cs in the water contaminated by radioactive nuclei.

• 한국정보디스플레이학회:학술대회논문집
• /
• 2005.07b
• /
• pp.1416-1418
• /
• 2005

A new DCM derivative containing a phenothiazine moiety, 4-(dicyanomethylene)-2-t-butyl-6-(9-ethylphenothiazine-2- enyl)-4H-pyran (DCPTZ), has been synthesized as an orange-red fluorescent dye molecule for organic lightemitting diodes (OLEDs). EL devices with the structure of $ITO/PEDOT-PSS/{\alpha}-NPD/Alq_3:DCPTZ/Alq_3/LiF/Al$ have been fabricated with changing the doping concentration of the DCPTZ. Maximum EL spectra of the devices ranged from $580{\sim}620$ nm depending on the doping concentration of the dye molecule. An EL device with 0.5 % doping concentration showed CIE coordinate (0.51, 0.47) at luminance of 100 $cd/m^2$. White light-emitting devices with the structure of $ITO/PEDOT-PSS/{\alpha}-NPD/{\alpha}-NPD:DCPTZ/DPVBi/Alq_3/$ LiF/Al have been also fabricated. The thickness of blue light-emitting 1,4-bis(2,2- diphenylvinyl)benzene (DPVBi) layer was changed to obtain a white light-emission. A white light-emission from the device was observed when the thickness of the DPVBi layer became thicker than 10 nm.

• YAKHAK HOEJI
• /
• v.49 no.6
• /
• pp.443-448
• /
• 2005

Diosgenin (25 (R) - spirost-5-en-3$\beta$ -ol) was oxidized with 2,3-dichloro -5,6-dicyano-1,4-benzoquinone to form 25(R)-1,4,6-spirostatrien-3-one (1) as rigid cyclic $\alpha$,$\beta$-unsaturated carbonyl compound. This compound was reacted with $H_{2}O_{2}$, m-chloroperoxybenzoic acid (mCPBA), NaOCl in the presence with (R,R)- or (S,S)-Jacobsen catalyst, tert-butyl-hydroperoxide (TBHP) in Mo$(CO)_{6}$, and in VO $(acac)_{2}$ catalyst, respectively, 25(R) -1,4,6-spirostatrien -3-one (1) was reduced with $NaBH_{4}$ L-Selectride, $LiAIH_{4}$,$BH_{3}$ $\cdot$$(CH_{3})_{2}S$, Superhydride, Red-Al, and lithium tri-tert-butoxyaluminium hydride. And 25(R)-4,6-spirostadien-3$\beta$-ol (4) was treated with $H_{2}O_{2}$, mCPBA, TBHP in D - (-) - and L-(+)-diisopropyltar-trate and $Ti(OiPr)_{4}$ condition (Sharpless asymmetric epoxidation), TBHP in $Mo(CO)_{6}$, and in $VO(acac)_{2}$ catalyst, respectively.

• Journal of the Korean Chemical Society
• /
• v.16 no.4
• /
• pp.214-218
• /
• 1972

The quadratic force constants of heteronuclear diatomic molecules, LiH, BeH, BH, CH, NH and OH are evaluated by use of the one center function of Bishop et. al. The master formula on which the computation is based was suggested by the previous work of one of the present authors. The results are in good agreement with the experimental values. It is found that around the nucleus of the atom located in the close vicinity of the expansion center of the one center function, the electronic distribution is relatively unrealistic, and the suggested formula would lead an erroneous result when one takes the origin of variables of $P_2(cos{\theta})/r_3$ at the atomic nucleus.

• The Korean Journal of Ceramics
• /
• v.6 no.3
• /
• pp.280-285
• /
• 2000

The electrolyte, $(HO)_2C_6H_2(SO_3Na)_2H_2O $(Tiron), disperses efficiently alumina powder in aqueous media and stable suspensions with 60 vol% solid loading can be prepared. The strong adsorption of this additive is mainly due to the ability of the molecule to form chelate rings with the particle surface but electrostatic interactions between the surface charge and the anionic dispersant strongly influence the amount of Tiron adsorbed. By using a cationic exchange route to substitute the counter ion which neutralizes the sulfonate groups, new molecules of dispersant have been prepared, either with mineral cations as $Li^+,\; Na+^,\; NH_4^\;+$, or with organic cations as counter ion but organic counter ions lead to less to less viscous suspensions than $Na^+$ in particular when the number of carbon atoms of the aliphatic chain increases from 1 to 3.

• Journal of the Korean Ceramic Society
• /
• v.33 no.2
• /
• pp.192-202
• /
• 1996

In Li0.4Ca0.05AlP0.5Si0.75O4.5 composition glass, glass-ceramic having a near 100% crystallinity after nucleation heat treatment of 74$0^{\circ}C$/2 h and crystallization heat treatment of 90$0^{\circ}C$/2 h and in-situ TiO2 whisker reinforced glass-ceramic after heat treatment of 105$0^{\circ}C$ for 20 h were fabricated with the addition of 4% TiO2 as a nucleating agent. With these materials a ball-on-disc type wear test was conducted in order to examine the effect of TiO2 whisker prepcipitation on ambient and high temperature wear properties of the glass-ceramic. Wear test results indicated that all specimens exhibited micro-fracture wear mechanism in ambient temperature. As temperature increased the wear rates of the materials were increased. However the in-situ TiO2 whisker reinforced glass-ceramic exhibited the lowest wear rate over the test temperature range. This resulted from the improvement of harness and fracture toughness of the material as the glass converted into the glass-ceramic followed by precipitation of TiO2 whiskers throughout the glass-ceramic matrix.

• Economic and Environmental Geology
• /
• v.28 no.3
• /
• pp.259-269
• /
• 1995

Column leaching tests were conducted using fresh and weathered pulverised fuel ash of some 17 and 40 years old from two major British power plants, with deionised water and simulated synthetic industrial leachate. The former was to see the leaching behaviour of weathered ash and the latter was to see if the formation of secondary products from water and PFA interaction and ameliorating effect in removing metals from industrial leachates. Fresh PFA liberates elevated concentrations of surface-enriched inorganics, including Ca, Na, K, B, $Cr_{total}$, Li Mo, Se and $SO^{2-}_4$. This might indicate their association with the surface of PFA particles. In the column leaching tests using weathered ash and deionised water, elements are not readily leached but are released more slowly, showing relatively constant concentrations. For the case of weathered ash, some readily soluble surface-enriched elements appears to have been liberated in their early stage of leaching and the liberation of glass associated elements are thought to be more important function in controlling the element concentration. The result from column leaching tests exceed for a number of elements when compared with various Water Standards and suggests the leachate from PFA disposal mound needs dilution to achieve target concentrations. PF A shows element retention effect for many elements, including B, Fe, Zn, Hg, Ni, Li and Mo, in the order of fresh Drax ash > weathered Drax ash > Weathered Meaford ash in retaining capacity. Geochemical modelling using a computer program WATEQ4F reveals some solubility controlling secondary solid products. These include $CaSO_4{\cdot}2H_2O$ for Ca, $Al(OH)_3$ for Al and $Fe(OH)_3$ for Fe.

• YAKHAK HOEJI
• /
• v.50 no.5
• /
• pp.326-331
• /
• 2006

We designed and synthesized new benzylpiperidinyl ether derivatives as beta-amyloid aggregation inhibitors for the development of novel anti-Alzheimer's disease agents. As starting material, 4-hydroxypiperidine was used. For protection of the amine group in piperidine (2), di-tert-butyl dicarbonate was reacted with 4-hydroxypiperidine in the presence of triethylamine. For introduction of benzyl group, benzylbromide was treated with compound 2 in dioxane. After deprotection of Boc group on amine in compound 3, ester (5) was synthesized by addition of ethyl-4-chlorobutyrate. The alcohol 6 was synthesized by hydride reduction of 5 using $LiAlH_4$. To obtain final products (7-14), the alcohol 6 was condensed with each of substituted benzoic acids. To screen beta-amyloid aggregation inhibition of the products, thioflavinT assay was performed using $A{\beta}1-42\;at\;37^{\circ}C$ for 26 h incubation, in vitro. From the result of screening, compound 8, 9, 11 and 12 showed effective activity about $65{\sim}85\;{\mu}M\;as\;IC_{50}$ value. Among the prepared compounds, 4-[4-(benzyloxy)piperidino]butyl-4-chlorobenzoate (8) was the most effective inhibitor having $IC_{50}\;of\;65.4{\mu}M$.