• Journal of Plant Biotechnology
• /
• v.31 no.1
• /
• pp.13-17
• /
• 2004

To improve transformation efficiency, the callus of Lilium lancifolium Thunb. were bombarded by particles coated with pIG 121 Hm which include NPT II and GUS genes, and then cocultivated with Agrobacterium tumefaciens EHA101 which contain pIG121Hm binary vector, carrying neomycin phosphotransferase (NPT II) and $\beta$-Glucuronidase (GUS) genes. Three days after cocultivation with Agrobacterium tumefaciens and particle bombardment, the callus clusters were transferred to MS medium containing 1mg/L 2,4-D, 0.1mg/L BAP, 100mg/L kanamycin and 200mg/L carbenicillin. Four weeks after transfer to the selection medium, GUS expression was detected and PCR analysis revealed the presence of NPT II fragment of the expected size (700 bp) in the transformed callus. The GUS expression from Agrobacterium-mediated transformants after particle bombardment increased to over 3-folds compared with that of callus cocultivated with Agrobacterium tumefaciens without particle bombardment. The callus clusters containing kanamycin resistant gene were transferred to MS medium containing 1mg/L NAA and 1mg/L BAP. Somatic embryos were developed in four weeks and microbulbs expressing GUS were formed.

• Transactions of the Korean Society of Mechanical Engineers
• /
• v.19 no.5
• /
• pp.1319-1332
• /
• 1995

Numerical analysis was performed to characterize the particle deposition behavior on a horizontal free-standing wafer with thermophoretic effect under the turbulent flow field. A low Reynolds number k-.epsilon. turbulence model was used to analyze the turbulent flow field around the wafer, and the temperature field for the calculation of the thermophoretic effect was predicted from the energy equation introducing the eddy diffusivity concept. The deposition mechanisms considered were convection, diffusion, sedimentation, turbulence and thermophoresis. For both the upper and lower surfaces of the wafer, the averaged particle deposition velocities and their radial distributions were calculated and compared with the laminar flow results and available experimental data. It was shown by the calculated averaged particle deposition velocities on the upper surface of the wafer that the deposition-free zone, where the deposition velocite is lower than 10$^{-5}$ cm/s, exists between 0.096 .mu.m and 1.6 .mu.m through the influence of thermophoresis with positive temperature difference of 10 K between the wafer and the ambient air. As for the calsulated local deposition velocities, for small particle sizes d$_{p}$<0.05 .mu.m, the deposition velocity is higher at the center of the wafer than at the wafer edge, whereas for particle size of d$_{p}$ = 2.0 .mu.m the deposition takes place mainly on the inside area of the wafer. Finally, an approximate model for calculating the deposition velocities was recommended and the calculated deposition velocity results were compared with the present numerical solutions, those of Schmidt et al.'s model and the experimental data of Opiolka et al.. It is shown by the comparison that the results of the recommended model agree better with the numerical solutions and Opiolka et al.'s data than those of Schmidt's simple model.

• KSII Transactions on Internet and Information Systems (TIIS)
• /
• v.10 no.8
• /
• pp.3791-3805
• /
• 2016

The visual attention mechanism includes 2 attention models, the bottom-up (B-U) and the top-down (T-D), the physiology of which have not yet been accurately described. In this paper, the visual attention mechanism is regarded as a Bayesian fusion process, and a visual attention model based on particle filter is proposed. Under certain particular assumed conditions, a calculation formula of Bayesian posterior probability is deduced. The visual attention fusion process based on the particle filter is realized through importance sampling, particle weight updating, and resampling, and visual attention is finally determined by the particle distribution state. The test results of multigroup images show that the calculation result of this model has better subjective and objective effects than that of other models.

• Korean Chemical Engineering Research
• /
• v.50 no.3
• /
• pp.522-526
• /
• 2012

New experimental method to measure solid descending velocity in a vertical downcomer was presented and effects of downcomer diameter and particle properties on descending velocities for Geldart group A, B, and D particle have been measured and investigated. The effect of initial solid inventory on solid descending velocity was negligible. However, solid flow rate, solid circulation rate and solid descending velocity increased as the downcomer diameter increased. Moreover, solid descending velocity increased linearly as the downcomer diameter increased and showed distinguishable trend for Geldart group D particle from Geldart group A and B particles. Empirical correlations of solid descending velocity for Geldart group D and Geldart group A and B particles have been derived based on the measured values. The correlations could predict well the solid descending velocities.

• Journal of Hydrogen and New Energy
• /
• v.31 no.5
• /
• pp.453-458
• /
• 2020

In this study, ethylene-propylene-diene monomer (EPDM) rubbers reinforced with various particle size of carbon black were prepared and tested. We followed recently published CSA/ANSI CHMC2 standard "the test methods for evaluating material compatibility in compressed hydrogen applications-polyemr". Measurement of change in hardness, tensile strength and volume were performed after exposure to maximum operating pressure, 87.5 MPa, for 168 hours (1 week). Once EPDM was exposed to high-pressure hydrogen, the samples experience volume increase and degradation of the physical properties. Also, after the dissolved hydrogen was fully eliminated from the specimens, the hardness and the tensile properties were not recovered. The rubber reinforced with smaller sizes of carbon black particles showed less volume expansion and decrease of physical properties. As a result, smaller particle size of carbon black filler led to more resistance to high-pressure hydrogen.

• Journal of the Chungcheong Mathematical Society
• /
• v.27 no.4
• /
• pp.635-641
• /
• 2014

The existence and the regularity of the particle trajectory flow X(x, t) along a velocity field u on $\mathbb{R}^n$ are discussed under the BMO-blow-up condition: $${\int}_{0}^{T}{\parallel}{\omega}({\tau}){\parallel}_{BMO}d{\tau}&lt;{\infty}$$ of the vorticity ${\omega}{\equiv}{\nabla}{\times}u$. A comment on our result related with the mystery of turbulence is presented.

• International Journal of Automotive Technology
• /
• v.7 no.6
• /
• pp.667-673
• /
• 2006

Diesel particulate matter(DPM) often contains small amounts of metal as a minor component but this metal may contribute to adverse health effects. Knowledge of the mechanism for particle formation as well as the size preference of the trace metals is critical to understanding the potential for health concerns. To achieve this, the size and the composition of each particle should be optimally measured at the same time. Single particle mass spectrometer(SPMS) would be the best tool for this objective. In this paper, we therefore will introduce new findings about the mechanism and distribution of the trace metals in DPM, derived from a study where an SPMS was used to analyze freshly emitted DPM.

• Proceedings of the Korean Institute of Electrical and Electronic Material Engineers Conference
• /
• 2005.05a
• /
• pp.142-145
• /
• 2005

AC-PDP에서 발광 휘도와 발광 효율의 개선은 매우 중요한 과제중의 하나이다. 높은 발광 휘도와 발광 효율을 위해선 VUV의 높은 발광 효율이 요구되어진다. 이 실험에서는 AC-PDP에서 Ne-Xe의 2원 혼합기체와 He-Ne-Xe의 3원 혼합기체의 VUV 발광 세기를 측정하였다. 기체 압력은 200 Torr, 300 Torr, 400 Torr, 500 Torr로 유지하였고, Xe 혼합비는 1%, 2%, 4%, 7%, 10%, 15%를 사용하였다. 진공자외선 발광 세기는 He-Ne-Xe의 3원 혼합기체가 Ne-Xe의 2원 혼합기체보다 발광 세기가 훨씬 높다는 것을 알 수 있었다. 그리고 Xe 함량이 증가함에 따라 공명선인 147 nm의 발광 세기는 Xe 혼합비가 약 10%까지는 증가하다가 10% 이후에는 포화되고, 반면 분자선인 173 nm은 Xe 함량과 가스 압력이 증가함에 따라 발광 세기가 증가하였다.

• Transactions on Electrical and Electronic Materials
• /
• v.10 no.4
• /
• pp.116-120
• /
• 2009

Ceramic-polymer composites have been investigated for their suitability as embedded capacitor materials because they combine the processing ability of polymers with the desired dielectric properties of ceramics. This paper discusses the dielectric properties of the ceramic ($BaTiO_3$)-polymer (Epoxy) composition as a function of ceramic particle size at a ceramic loading of 40 vol%. The dielectric constant of these ceramic-polymer composites increases as the powder size decreases. Results show that ceramic-polymer composites have a high dielectric constant associated with the $BaTiO_3$ powder with a 200 nm particle size, high insulation resistance, high breakdown voltage (> 22 KV/mm), and low dielectric loss (0.018-0.024) at 1 MHz.

• Journal of Powder Materials
• /
• v.23 no.6
• /
• pp.409-413
• /
• 2016

Electrical wire explosion in liquid media is a promising method for producing metallic nanopowders. It is possible to obtain high-purity metallic nanoparticles and uniform-sized nanopowder with excellent dispersion stability using this electrical wire explosion method. In this study, Ni-Fe alloy nanopowders with core-shell structures are fabricated via the electrical explosion of Ni-Fe alloy wires 0.1 mm in diameter and 20 mm in length in de-ionized water. The size and shape of the powders are investigated by field-emission scanning electron microscopy, transmission electron microscopy, and laser particle size analysis. Phase analysis and grain size determination are conducted by X-ray diffraction. The result indicate that a core-shell structured Ni-Fe nanopowder is synthesized with an average particle size of approximately 28 nm, and nanosized Ni core particles are encapsulated by an Fe nanolayer.