• 제목/요약/키워드: $In_2O_3$ gas sensor

검색결과 300건 처리시간 0.027초

열형 적외선 센싱소자용 Mn-Ni-Co계 써미스터 박막 특성 평가 (Evaluations of Mn-Ni-Co type thermistor thin film for thermal infrared sensing element)

  • 전민석;최덕균
    • 한국결정성장학회지
    • /
    • 제13권6호
    • /
    • pp.297-303
    • /
    • 2003
  • rf magnetron sputtering법을 이용하여 Mn-Ni-Co계 써미스터 박막을 증착하였다. $300^{\circ}C$$Ar/O_2$ = 10/0에서, cubic spinel 상형성이 이루어졌으며 공정가스에 산소 첨가 시, cubic spinel 상은 열처리를 통해서도 형성되지 않았다. 써미스터 박막은 Mn, Ni, Co 성분 외 다른 이종 성분은 포함되어 있지 않았다. 써미스터 박막에 대한 적외선 반사 특성을 분석으로 증착된 박막은 일정 각도로 입사되는 적외선에 대해 비교적 높은 반사율을 가짐을 관찰할 수 있었다. DI water : $HNO_3$: HCI=60 : 30 : 10 vo1%에서 써미스터 박막의 식각 속도는 약 63 nm/min였다. 박막 써미스터의 B상수는 약 3500 K였으며 TCR은 약 -3.95%/K였다 전압감도는 약 108.5 V/W였으며 NEP와 specific detectivity는 각각 $5.1\times 10^{-7}$ W/$Hz^{-1/2}$ $0.2\times 10^6$cm $Hz^{1/2}$/W였다.

습도와 $CO_2$ 농도의 실시간 동시감지를 위한 무전원 SAW 기반 집적 센서 개발 (Development of Battery-free SAW Integrated Microsensor for Real Time Simultaneous Measurement of Humidity and $CO_2$ component)

  • 임천배;이기근;왕웬;양상식
    • 마이크로전자및패키징학회지
    • /
    • 제16권1호
    • /
    • pp.13-19
    • /
    • 2009
  • 상대습도와 $CO_2$ 기체의 실시간 동시 감지가 가능한 표면탄성파(SAW: Surface Acoustic Wave) 기반의 무선, 무전원 센서가 개발되었다. 본 소자는 $41^{\circ}YX\;LiNbO_3$ 기판 위에 만들어졌으며, 반사 지연선의 구조로 이루어져 있다. 본 논문의 반사 지연선은 양방향 감지가 가능한 Interdigital transducer(IDT)와 10개의 리플렉터(reflector)로 이루어져 있다. 감지 필름은 Teflon AF 2400과 친수성의 $SiO_2$층이 이용되었으며, 이는 각각 $CO_2$와 상대 습도의 감지를 담당한다. 소자의 제작에 앞서 최적의 소자 설계 조건들을 도출하기 위해 Couple of mode(COM) 모델링이 실시되었다. 시뮬레이션 결과를 반영하여 소자의 제작이 진행되었으며, 네트워크 분석기를 이용하여 무선 측정이 실시 되었다. 시간 영역에서 측정된 반사계수 $S_{11}$은 높은 신호 대 잡음 비, 작은 신호 감쇠, 적은 허위 피크를 보였다. 제작된 소자는 각각 $75{\sim}375ppm$$CO_2$ 범위와 $20{\sim}80%$의 상대 습도 범위에서 측정되었으며, 각각 $2^{\circ}/ppm$$CO_2$ 민감도, $7.45^{\circ}/%$의 상대습도에 대한 민감도를 보였고, 좋은 선형성과 반복성을 보였다. 또한 민감도 측정 과정에서 온도와 습도의 보상 과정을 거쳐 더욱 정확한 민감도를 갖도록 하였다.

  • PDF

실리콘 미세 가공을 이용한 열전형 미소유량센서 제작 및 특성 (Fabrication and characteristics of micro-machined thermoelectric flow sensor)

  • 이영화;노성철;나필선;김국진;이광철;최용문;박세일;임영언
    • 센서학회지
    • /
    • 제14권1호
    • /
    • pp.22-27
    • /
    • 2005
  • A thermoelectric flow sensor for small quantity of gas flow rate was fabricated using silicon wafer semiconductor process and bulk micromachining technology. Evanohm R alloy heater and chromel-constantan thermocouples were used as a generation heat unit and sensing parts, respectively. The heater and thermocouples are thermally isolated on the $Si_{3}N_{4}/SiO_{2}/Si_{3}N_{4}$ laminated membrane. The characteristics of this sensor were observed in the flow rate range from 0.2 slm to 1.0 slm and the heater power from 0.72 mW to 5.63 mW. The results showed that the sensitivities $(({\partial}({\Delta}V)/{\partial}(\dot{q}));{\;}{\Delta}V$ : voltage difference, $\dot{q}$ : flow rate) were increased in accordance with heater power rise and decreasing of flow rate.

연속 기체흐름계 및 일시 기체흐름계에서의 고체 전해질 $CO_2$ 가스센서의 열역학적 분석 (Thermodynamic Analysis of Solid Electrolyte $CO_2$ Sensor in Continuous and Discontinuous Flow Systems)

  • 최순돈
    • 센서학회지
    • /
    • 제7권5호
    • /
    • pp.319-326
    • /
    • 1998
  • 연속 기체흐름계에서 감지막으로 $Na_2CO_3$$MCO_3$ ($M=Cs_2,K_2,Li_2,Ca$)를 입힌 $Na^+$ 이온 전해질 센서가 $CO_2$ 가스를 감지할 때 anode반응을 도출하였다. 흔히 사용되는 전기화학 센서에 대해 일반적으로 알려진 전체 전극반응인 $MCO_3=MO+CO_2$ 반응은 위의 $Na^+$이온 전해질 센서에는 적합한 반응이 아니었다. 따라서 anode 반응은 전체cell 내의 ionic balance를 유지하기 위해 전해질과 감지막 계면에 이온교환반응을 첨가시킴으로써 도출할 수 있었으며 anode반응은 $Na_2CO_3$ 및 감지막의 금속($M^{++}$) 이온이 포함된 산화물이 참가하는 반응임을 알 수 있었다. 이와 같이 도출된 전극반응으로부터 구한 EMF와 일시 기체흐름계에서의 출력 EMF와의 차이를 아울러 검토하였다. 이러한 출력에서의 차이는 $CO_2$$O_2$의 분압과 분위기가스와 전극물질과의 비가역반응에 기인됨을 알았다.

  • PDF

Enhancement of Methanol Gas Sensitivity of Cu Intermediate ITO Film Gas Sensors

  • Shin, Chang-Ho;Chae, Joo-Hyun;Kim, Yu-Sung;Jeong, Cheol-Woo;Kim, Dae-Il
    • 한국재료학회지
    • /
    • 제20권5호
    • /
    • pp.267-270
    • /
    • 2010
  • Sn doped $In_2O_3$ (ITO) and ITO/Cu/ITO (ICI) multilayer films were prepared on glass substrates with a reactive radio frequency (RF) magnetron sputter without intentional substrate heating, and then the influence of the Cu interlayer on the methanol gas sensitivity of the ICI films were considered. Although both ITO and ICI film sensors had the same thickness of 100 nm, the ICI sensors had a sandwich structure of ITO 50 nm/Cu 5 nm/ITO 45 nm. The ICI films showed a ten times higher carrier density than that of the pure ITO films. However, the Cu interlayer may also have caused the decrement of carrier mobility because the interfaces between the ITO and Cu interlayer acted as a barrier to carrier movement. Although the ICI films had two times a lower mobility than that of the pure ITO films, the ICI films had a higher conductivity of $3.6{\cdot}10^{-4}\;{\Omega}cm$ due to a higher carrier density. The changes in the sensitivity of the film sensors caused by methanol gas ranging from 50 to 500 ppm were measured at room temperature. The ICI sensors showed a higher gas sensitivity than that of the ITO single layer sensors. Finally, it can be concluded that the ICI film sensors have the potential to be used as improved methanol gas sensors.

In-situ 도핑된 M/NEMS용 다결정 3C-SiC 박막의 특성 (Characteristics of in-situ doped polycrystalline 3C-SiCthin films for M/NEMS applications)

  • 김강산;정귀상
    • 센서학회지
    • /
    • 제17권5호
    • /
    • pp.325-328
    • /
    • 2008
  • This paper describes the electrical properties of poly (polycrystalline) 3C-SiC thin films with different nitrogen doping concentrations. In-situ doped poly 3C-SiC thin films were deposited by APCVD at $1200^{\circ}C$ using HMDS (hexamethyildisilane: $Si_2(CH_3)_6)$) as Si and C precursor, and $0{\sim}100$ sccm $N_2$ as the dopant source gas. The peak of SiC is appeared in poly 3C-SiC thin films grown on $SiO_2/Si$ substrates in XRD(X-ray diffraction) and FT-IR(Fourier transform infrared spectroscopy) analyses. The resistivity of poly 3C-SiC thin films decreased from $8.35{\Omega}{\cdot}cm$ with $N_2$ of 0 sccm to $0.014{\Omega}{\cdot}cm$ with 100 sccm. The carrier concentration of poly 3C-SiC films increased with doping from $3.0819{\times}10^{17}$ to $2.2994{\times}10^{19}cm^{-3}$ and their electronic mobilities increased from 2.433 to $29.299cm^2/V{\cdot}S$, respectively.

JAXA'S EARTH OBSERVING PROGRAM

  • Shimoda, Haruhisa
    • 대한원격탐사학회:학술대회논문집
    • /
    • 대한원격탐사학회 2006년도 Proceedings of ISRS 2006 PORSEC Volume I
    • /
    • pp.7-10
    • /
    • 2006
  • Four programs, i.e. TRMM, ADEOS2, ASTER, and ALOS are going on in Japanese Earth Observation programs. TRMM and ASTER are operating well, and TRMM operation will be continued to 2009. ADEOS2 was failed, but AMSR-E on Aqua is operating. ALOS (Advanced Land Observing Satellite) was successfully launched on $24^{th}$ Jan. 2006. ALOS carries three instruments, i.e., PRISM (Panchromatic Remote Sensing Instrument for Stereo Mapping), AVNIR-2 (Advanced Visible and Near Infrared Radiometer), and PALSAR (Phased Array L band Synthetic Aperture Radar). PRISM is a 3 line panchromatic push broom scanner with 2.5m IFOV. AVNIR-2 is a 4 channel multi spectral scanner with 10m IFOV. PALSAR is a full polarimetric active phased array SAR. PALSAR has many observation modes including full polarimetric mode and scan SAR mode. After the unfortunate accident of ADEOS2, JAXA still have plans of Earth observation programs. Next generation satellites will be launched in 2008-2012 timeframe. They are GOSAT (Greenhouse Gas Observation Satellite), GCOM-W and GCOM-C (ADEOS-2 follow on), and GPM (Global Precipitation Mission) core satellite. GOSAT will carry 2 instruments, i.e. a green house gas sensor and a cloud/aerosol imager. The main sensor is a Fourier transform spectrometer (FTS) and covers 0.76 to 15 ${\mu}m$ region with 0.2 to 0.5 $cm^{-1}$ resolution. GPM is a joint project with NASA and will carry two instruments. JAXA will develop DPR (Dual frequency Precipitation Radar) which is a follow on of PR on TRMM. Another project is EarthCare. It is a joint project with ESA and JAXA is going to provide CPR (Cloud Profiling Radar). Discussions on future Earth Observation programs have been started including discussions on ALOS F/O.

  • PDF

ALD법을 이용해 증착된 TaN 박막의 Cu 확산방지 특성 (Characteristics of TaN by Atomic Layer Deposition as a Copper Diffusion Barrier)

  • 나경일;허원녕;부성은;이정희
    • 센서학회지
    • /
    • 제13권3호
    • /
    • pp.195-198
    • /
    • 2004
  • For a diffusion barrier against copper, tantalum nitride films have been deposited on $SiO_{2}$ by atomic layer deposition (ALD), using PEMAT(Pentakis(ethylmethylamino)tantalum) and $NH_{3}$ as precursors, Ar as purging gas. The deposition rate of TaN at substrate temperature $250^{\circ}C$ was about $0.67{\AA}$ per one cycle. The stability of TaN films as a Cu diffsion barrier was tested by thermal annealing for 30 minutes in $N_{2}$ ambient and characterized through XRD, sheet resistance, and C-V measurement(Cu($1000{\AA}$)/TaN($50{\AA}$)/$SiO_{2}$($2000{\AA}$)/Si capacitor fabricated), which prove the TaN film maintains the barrier properties Cu below $400^{\circ}C$.

기체확산 튜브 부착 신선 농산물 용기에서의 실시간 산소농도 제어의 효과 (Effectiveness of Real-time Oxygen Control in Fresh Produce Container Equipped with Gas-diffusion Tube)

  • 조윤희;안덕순;이동선
    • 한국포장학회지
    • /
    • 제19권3호
    • /
    • pp.119-123
    • /
    • 2013
  • 기체확산 튜브를 부착한 신선 농산물 용기에서 적정 변형기체(modified atmosphere, MA)를 형성하기 위하여 산소 농도에 따라 실시간적으로 반응하여 튜브 개폐가 이루어지는 제어 logic을 개발하고 그 유효성을 검증하였다. 본 연구는 이전의 연구에서 이루어진 $O_2$$CO_2$ 센서 모두를 이용하여 제어하는 logic의 단순화를 시도한 것으로 7~10%의 $O_2$, 5~10%의 $CO_2$ 농도를 적정 MA로 갖는 시금치를 담은 용기 시스템에 대해서 $10^{\circ}C$에서 실험적으로 개발된 제어 logic의 효과를 검증하였다. $[O_2]+[CO_2]$=21%의 가정된 관계에 기반하여 $O_2$ 농도 제어점을 $CO_2$ 농도 허용 상한값(10%)에 상당하는 11%로 설정하여 제어한 결과 $CO_2$ 농도가 허용상한치 10% 바로 이하에 머무는 것으로 확인되었다. $O_2$ 농도 제어점은 품목의 $O_2/CO_2$의 MA 요구도에 따라 $O_2$ 하한값 자체 혹은 조정된 하한값으로 둘 수 있다. 산소 센서만을 사용한 개발 제어 logic은 11%의 평형 $O_2$ 농도와 8~9%의 $CO_2$ 농도를 유지하였고, 이는 $O_2$$CO_2$ 센서 모두를 사용한 제어의 조건에서 9~10%의 평형 $O_2$ 농도와 10%의 $CO_2$ 농도를 유지한 것과 비슷하였다. 그리고 확산튜브를 부착한 두 가지의 MA 용기에서 보관된 시금치의 품질은 차이가 없이 통기성 대조구에 비하여 우수하였다.

  • PDF

단결정 산화아연 나노선의 기초 물성 연구 (Study on Basic Properties of Single Crystalline ZnO Nanowire)

  • 라현욱;리즈완 칸;김진태;여찬혁;임연호
    • 한국진공학회지
    • /
    • 제18권4호
    • /
    • pp.259-265
    • /
    • 2009
  • 본 연구에서는 열증착법을 이용하여 합성된 단결정의 산화아연 나노선들을 이용하여 전계효과트랜지스터를 제작하여 광학, 표면반응 및 전기화학적인 거동들에 대한 기초 연구들을 수행하였다. 100 nm의 지름과 길이 5 um 길이를 갖는 단결정 산화아연나노선의 전자 농도와 이동도는 각각 $1.30{\times}10^{18}cm^{-3}$$15.6cm^2V^{-1}s^{-1}$이었으며, 자외선을 나노선에 조사한 경우 약 400배 정도 전류가 증가하였다. 또한 나노선들은 여러 농도의 수소와 일산화탄소에 대해 잘 알려진 표면반응으로 기인한 기체 감지 특성을 보였고, 0.1 M NaCl 전해질 내에서 전형적인 산화아연의 나노선의 전기적 특성을 유지함을 확인하였다.