• Bulletin of the Korean Chemical Society
• /
• 제26권8호
• /
• pp.1214-1218
• /
• 2005

Ti-HMS samples in which titanium species exist in various forms of isolated tetrahedral state, finely dispersed $TiO_2$ cluster, and some in extra-framework anatase phase were prepared via a direct synthesis route using dodecylamine (DDS) as a structure directing agent by systematically varying the titanium loadings between 2 and 50 mol% Ti/(Ti+Si) in substrate composition. Physicochemical properties of the materials were evaluated using XRD, SEM/TEM, N2 adsorption, UV-vis and XANES spectroscopies. Catalytic properties of Ti-HMS in cyclohexene and 2,6-di-tert-butyl phenol (2,6-DTBP) oxidation using aqueous $H_2O_2$, and vapor phase photocatalytic degradation of acetaldehyde were evaluated. High $H_2O_2$ selectivity was obtained in cyclohexene oxidation, and cyclohexene conversion was found primarily dependent on the amount of tetrahedrally coordinated Ti sites. For bulky 2,6-DTBP oxidation and photocatalytic oxidation of acetaldehyde, on the other hand, conversions were found dependent on the total amount of Ti sites and maintaining an uniform mesoporous structure in the catalysts was not critical for efficient catalysis.

• 열처리공학회지
• /
• 제20권5호
• /
• pp.231-236
• /
• 2007

High velocity oxy-fuel (HVOF) spraying was used to coat Ti(Al,O)/$Al_2O_3$ powder onto the SS41 steel plate. Macrostructure of the coated specimen has been investigated by scanning electron micrograph (SEM). High temperature oxidation behavior of the coated specimen and SS41 steel have been studied. From the results of SEM observation, Ti(Al,O)/$Al_2O_3$ powder was coated well onto the substrate SS41 steel. Porosity onto the coated layer was only 0.38%. The oxidation results showed that Ti(Al,O)/$Al_2O_3$ powder coated SS41 steel have improved little oxidation resistance at $900^{\circ}C$ in air, but improved remarkably oxidation resistance at $800^{\circ}C $ in air compare to the substrate SS41 steel.

• 한국세라믹학회지
• /
• 제27권1호
• /
• pp.79-85
• /
• 1990

A study on the oxidation of SiO2 sensing layer was done at 950, 1000, 105$0^{\circ}C$ under dry O2 atmosphere. The rate determining step around the oxide layer thickness, 1000$\AA$ was different with the oxidation temperature, as follows ; ⅰ) linear growth at 95$0^{\circ}C$ and ⅱ) parabolic growth at 100$0^{\circ}C$ and 105$0^{\circ}C$. The flatness of SiO2 film was observed within $\pm$1% and surface state charge density was reduced by annealing in N2 atmosphere. Finally, pH sensitivity of SiO2 film, in the range of pH 3-9, was 20mV/pH.

• 한국재료학회지
• /
• 제3권4호
• /
• pp.403-409
• /
• 1993

본 논문에서는 Si(111)에 대한 건식산화와 어닐링에서 결함의 억제 또는 제거에 $NH_3$가 효과적임을 밝혔다. 산화방식은 건식산화(dry $O_2$ oxidation)및 $NH_3$산화($NH_3$ added in dry $O_2$oxidation)를 택하였고 $N_2$및 $NH_3N_2$분위기에서 어닐링 효과를 평가하였다. 건식산화에서는 발생되는 결함이 성장시간에 따라서 길이가 길어지며, $NH_3$산화에서는 결함이 발견되지 않았다. 또한 초기산화를 $NH_3$산화로 하고서 건식산화를 하였을 때 계면에서의 결함을 제거하는 효과가 있다. 건식산화 또는 $NH_3$산화를 한 후 이들 시료에 대하여 7.5% $NH_3N_2$분위로 어닐링하면OSF의 게터링(gettering)효과가 있었다. $NH_3$산화방식에서 7.5%$NH_3N_3$분위기로 어닐링했을때가 건식산화방식에 비하여 OSF의 길이가 20%정도 감소하였다. OSF의 모양은 pit형으로 (111)면에 대하여 (011)면 쪽으로 게터링이 일어났으며<110>방향으로 식각되는 성질이 있었다.

• 대한화학회지
• /
• 제37권4호
• /
• pp.401-407
• /
• 1993

티타늄 금속판을 공기산화와 수증기 산화하여 만든 $TiO_{2-x}$ 박막을 전극으로 사용하여 1M NaOH 용액에서 전기화학적 성질을 연구하였다. 순환 전압 전류법에 의한 산소의 환원전위는 SCE에 대해 -0.9 ∼ -1.0 V 근처에서 나타났으며 이들 반응은 전체적으로 비가역적으로 진행되었다. 수증기 산화법에 의해 제조된 $TiO_{2-x}$ 전극들의 전기화학적 성질들은 공기 산화법에 의해 제조된 것과 다르게 나타났으며 900$^{\circ}$이상의 온도에서 제조된 전극들은 단결정 $TiO_2$ 전극들의 전기화학적 성질과 비슷하였다. $TiO_{2-x} $전극에서 산소위 환원전위는 flat band 전위보다 더 양전위 쪽에서 나타났으며 pH 증가에 따라 60mV/pH 정도 감소되었다.

• 한국진공학회:학술대회논문집
• /
• 한국진공학회 2009년도 제38회 동계학술대회 초록집
• /
• pp.339-339
• /
• 2010

The metallic nanoparticles (Pt, Au, Ag. Cu, etc.) supported on ceria-titania mixed oxide exhibit a high catalytic activity for the water gas shift reaction ($H_2O\;+\;CO\;{\leftrightarrow}\;H_2\;+\;CO_2$) and the CO oxidation ($O_2\;+\;2CO\;{\leftrightarrow}\;2CO_2$). It has been speculated that the high catalytic activity is related to the easy exchange of the oxidation states of ceria ($Ce^{3+}$ and $Ce^{4+}$) on titania, but very little is known about the ceria titanium interaction, the growth mode of metal on ceria titania complex, and the reaction mechanism. In this work, the growth of $CeO_x$ and Au/$CeO_x$ on rutile $TiO_2$(110) have been investigated by Scanning Tunneling Microscopy (STM), Photoelectron Spectroscopy (PES), and DFT calculation. In the $CeO_x/TiO_2$(110) systems, the titania substrate imposes on the ceria nanoparticles non-typical coordination modes, favoring a $Ce^{3+}$ oxidation state and enhancing their chemical activity. The deposition of metal on a $CeO_x/TiO_2$(110) substrate generates much smaller nanoparticles with an extremely high activity. We proposed a mechanism that there is a strong coupling of the chemical properties of the admetal and the mixed-metal oxide: The adsorption and dissociation of water probably take place on the oxide, CO adsorbs on the admetal nanoparticles, and all subsequent reaction steps occur at the oxide-admetal interface.

• 대한화학회지
• /
• 제30권1호
• /
• pp.57-62
• /
• 1986

HCr$O_4^-$에 의한 $[Mo_3O_4(C_2O_4)_3(H_2O)_3]^{2-}$의 산화는 몰리브덴(IV)화합물, $[Mo_2O_5(C_2O_4)_2(H_2O)_2]^{2-}$를 생성한다. HCr$O_4^-$와 $[Mo_3O_4(C_2O_4)_3(H_2O)_3]^{2-}$의 반응에 대한 화학양론은 $2Mo_3^{IV} + 4Cr^{VI} {\to} 3Mo_2^{VI} + 4Cr^{III}$와 같다. 관찰된 속도상수는 수소이온농도에 의존한다.$Cr^{VI}$는 $Cr^V$와 $Cr^{IV}$를 거쳐서 $Cr^{III}$로 일전자씩 연속적으로 변화한다. 상세한 메카니즘이 논의된다.

• 한국세라믹학회지
• /
• 제31권7호
• /
• pp.777-783
• /
• 1994

Oxidation behavior of hot-pressed silicon nitride ceramics with various sintering additives has been investigated. The weight gain of each specimens has shown in the range of 0.11 mg/$\textrm{cm}^2$ ~3.4 mg/$\textrm{cm}^2$ at 140$0^{\circ}C$ for 192 h and eleven compositions have shown good oxidation resistance with the weight gain below 0.5 mg/$\textrm{cm}^2$. The oxidation rate has been shown to obey the parabolic rate law and the oxidized surface has consisted of $\alpha$-cristobalite and M2Si2O7 or MSiO3 (M=rare earth or transition metals) phase. The oxidation rate of each specimens has related to the eutectic temperature between additive oxide and SiO2, and ionic radius of additive oxides, respectively. From the above results, it could be concluded that the oxidation behavior of hot pressed silicon nitride is dominated by the high temperature properties of grain boundary glassy phase and the high temperature properties of grain boundary glassy phase are affected by the ionic radius of additive oxides.

• 환경위생공학
• /
• 제18권2호
• /
• pp.52-59
• /
• 2003

This study was progressed in photocatalysis of VOCs using $UV/TiO_2$ which was a benign process environmentally. The experiments were peformed to know photodegradation characteristics as crystalline structure of $TiO_2$ which had anatase, rutile and P-25 (anatase : rutile = 70 : 30). The main purpose of this study was to identify photocatalytic characteristics as inlet concentration of reactants, $H_2O$, and residence time. The inlet concentration of VOCs was changed 50, 100 and 200 ppmv, and amount of $H_2O$ was changed 0, 500 and $1000{\;}mg/m^3$, respectively. The deep conversion was increased as the inlet concentration decreased, and the amount of $H_2O$ increased. The deep conversion of benzene had the highest value at $1000{\;}mg/m^3${\;}H_2O$ and 50 ppmv of inlet concentration. The reactivity of reactants was decreased in order benzene > toluene > m-xylene. Also, the photocatalytic deep conversion was increased as residence time increased, because the contact time between reactants and catalyst was increased. In this study, intermediates had not found by GC/MSD analysis. Therefore, the reactants were completely converted to $H_2O{\;}and{\;}CO_2$.

• 청정기술
• /
• 제26권4호
• /
• pp.286-292
• /
• 2020

본 연구는 Cu/CeO2-X 촉매의 저온 CO 산화 활성에 미치는 영향을 촉매의 구조적 특성, 반응 특성을 통해 확인하였다. 사용된 촉매는 습윤 함침법으로 제조되었으며, 각기 다른 소성온도(300~600 ℃)에서 형성된 CeO2 (지지체)를 이용하여 Cu (활성금속)를 담지함으로써 Cu/CeO2-X 촉매를 제조하였다. 제조된 Cu/CeO2-X 촉매는 저온 CO 산화 활성을 평가하였다. 125 ℃에서 Cu/CeO2_300 촉매는 90% 이상의 활성을 나타냈으며, CeO2의 소성온도가 증가됨에 따라 활성이 점차 감소하여, Cu/CeO2_600 촉매는 65%를 나타냈다. 다음으로 촉매의 물리/화학적 특성을 Raman, BET, XRD, H2-TPR, XPS 분석으로 확인하였다. XPS 분석 결과, CeO2-X의 소성온도가 낮을 수록 불안정한 Ce3+ 종(비 화학양론 종) 비율이 증가하였다. 증가된 Ce3+종은 Cu와 결합함으로 써 치환결합을 형성하였으며 Raman 분석의 CeO2 peak 변화와 H2-TPR 분석의 치환결합 구조의 환원 peak를 통해 확인하였다. 결과적으로 Cu와 CeO2의 치환 결합 형성은 촉매의 redox 특성 및 저온 CO 산화 활성을 증진시켰다고 판단된다.