• International Journal of Control, Automation, and Systems
• /
• 제4권3호
• /
• pp.271-280
• /
• 2006

This paper proposes a new approach to solve robust $H{\infty}$ control problems for uncertain continuous-time descriptor systems. Necessary and sufficient conditions for robust $H{\infty}$ control analysis and design are derived and expressed in terms of a set of LMIs. In the proposed approach, the uncertainties are allowed to appear in all system matrices. Furthermore, a couple of assumptions that are required in earlier design methods are not needed anymore in the present one. The derived conditions also include several interesting results existing in the literature as special cases.

• Journal of Electrical Engineering and Technology
• /
• 제6권2호
• /
• pp.226-232
• /
• 2011

The $H_{\infty}$ approach, adopted in this paper, is based on loop shaping using a normalized coprime factor combined with a field-oriented control to control induction motor. We develop two loops. The first one, the inner loop, controls the stator current by $H{\infty}$ controller in order to obtain good performance. The second loop, the outer one, guarantees stability and tracking performance of speed and rotor flux using a proportional integral controller. When the rotor flux cannot be measured, we introduce a flux observer to estimate the rotor flux. Simulation and experimental results are presented to validate the effectiveness and the good performance of this control technique.

• 대한전자공학회:학술대회논문집
• /
• 대한전자공학회 2003년도 하계종합학술대회 논문집 V
• /
• pp.2589-2592
• /
• 2003

In this paper, a robust mixed H$_2$/H$\_$$\infty$/ output feedback control method is applied to the design of loop filter for PLL carrier phase tracking. The proposed method successfully copes with large S-curve slope uncertainty and a significant decision delay in the closed-loop that may exist In modern receivers due to a convolutional decoder or an equalizer. The objective is to design an output feedback controller which minimizes the H$_2$performance while satisfying the H$\_$$\infty$/ performance to guarantee the gain margin and phase margin for linear time invariant(LTI) polytopic uncertain systems. LMIs based approach is given to solve this problem. We can verify the H$\_$$\infty$/ performance satisfaction and minimize the phase detector error through the simulation result.

• International Journal of Control, Automation, and Systems
• /
• 제5권2호
• /
• pp.117-127
• /
• 2007

Many real world control systems usually track several control objectives, simultaneously. At the moment, it is desirable to meet all specified goals using the controllers with simple structures like as proportional-integral (PI) and proportional-integral-derivative (PID) which are very useful in industry applications. Since in practice, these controllers are commonly tuned based on classical or trial-and-error approaches, they are incapable of obtaining good dynamical performance to capture all design objectives and specifications. This paper addresses a new method to bridge the gap between the power of optimal multiobjective control and PI/PID industrial controls. First the PI/PID control problem is reduced to a static output feedback control synthesis through the mixed $H_2/H_{\infty}$ control technique, and then the control parameters are easily carried out using an iterative linear matrix inequalities (ILMI) algorithm. Numerical examples on load-frequency control (LFC) and power system stabilizer (PSS) designs are given to illustrate the proposed methodology. The results are compared with genetic algorithm (GA) based multiobjective control and LMI based full order mixed $H_2/H_{\infty}$ control designs.

• Journal of Advanced Marine Engineering and Technology
• /
• 제35권6호
• /
• pp.820-828
• /
• 2011

에너지 절약은 해상운송분야에서 이익을 내기 위한 가장 중요한 요인 중 하나이다. 연료 소비율을 낮추기 위해서는 가능한 한 선박의 추진효율을 높여야만 한다. 추진효율은 추진기관과 낮은 회전속도에서 더 좋은 효율을 갖는 프로펠러의 조합에 의존한다. 기관은 저속이 될수록 연료분사과정에서의 지연시간으로 인해 회전 토크 변동이 심해진다. 본 연구에서는 강인 제어이론을 적용하여 강인 안정성과 강인 성능을 고려한 기관 속도제어기들, 즉 준최적 $H_{\infty}$제어기, $H_{\infty}$루프-성형 제어기 및 ${\mu}$-제어기를 설계한다. 컴퓨터 시뮬레이션 결과로부터 이들 3가지 제어기의 타당성을 검토한다.

• 한국자동차공학회논문집
• /
• 제19권5호
• /
• pp.22-28
• /
• 2011

This paper presents an active roll motion control of a passenger vehicle. The roll controller is designed in the framework of $H_{\infty}$ control scheme based on the 3 DOF vehicle model taking into consideration parameter variations, which affect the roll dynamics, and unmodeled high frequency dynamics for robustness and performance. In order to investigate the feasibility of the active roll control system in a car, its performance is evaluated by simulation in a full vehicle model with nonlinear tire characteristics under various operating conditions. Finally, in order to enhance the performance in a transient region taking into account the limited bandwidth of the actuating module, a hybrid control strategy is presented.

• 한국소음진동공학회:학술대회논문집
• /
• 한국소음진동공학회 2005년도 춘계학술대회논문집
• /
• pp.541-546
• /
• 2005

In this paper, the various uncertainties, which are generated in working of an optical disk drive, are discussed in details and the robust servo design considering the uncertainties are discussed. First, the classification of the uncertainties and the modeling process including that are treated. Then, the robust servo designs using QFT and $H_{\infty}$ theory are performed. Finally, the designed servo loops realized by DSP are applied to the real system. From these experiments, we proved that the robust servo design using QFT and $H_{\infty}$ have a good performance and a good robust stability when it compared with the conventional servo loop.

• 한국지능시스템학회논문지
• /
• 제19권6호
• /
• pp.840-847
• /
• 2009

This paper deals with an $H_{\infty}$ output feedback controller design for uncertain singularly perturbed T-S fuzzy systems. Integral quadratic constraints are used to describe various kinds of uncertainties of the plant. It is shown that the $H_{\infty}$ norm of the uncertain singularly perturbed fuzzy system is less than $\gamma$ for a sufficiently small $\varepsilon$ > 0 if the $H_{\infty}$ norms of both the slow and fast subsystem are less than $\gamma$. Using this fact, we develop a linear matrix inequality based design method which is independent of the singular perturbation parameter $\varepsilon$. A numerical example is provided to demonstrate the efficacy of the proposed design method.

• 제어로봇시스템학회:학술대회논문집
• /
• 제어로봇시스템학회 2004년도 ICCAS
• /
• pp.552-557
• /
• 2004

This paper presents a disturbance observer based on an $H_{\infty}$ controller synthesis for the trajectory control of a hydraulic excavator. Compared to conventional robot manipulators driven by electrical motors, the hydraulic excavator has more nonlinear and coupled dynamics. In particular, the interactions between an excavation tool and the materials being excavated are unstructured and complex. In addition, its operating modes depend on working conditions, which make it difficult to not only derive the exact mathematical model but also design a controller systematically. In this study, the approximated linear model obtained through off-line system identification is used as nominal plant model for a disturbance observer. A disturbance observer based tracking controller which considers the effect of disturbance and model uncertainty is synthesized in $H_{\infty}$ frameworks. Simulation results are used to demonstrate the applicability of the proposed control scheme.

• 한국생산제조학회지
• /
• 제23권3호
• /
• pp.266-272
• /
• 2014

This study proposes a closed-loop shaping control method with $H_{\infty}$ optimization for optical image stabilization (OIS) in mobile phone cameras. The image stabilizer is composed of a horizontal stage constrained by ball bearings and actuated by the magnetic force from voice coil motors. The displacement of the stage is measured by Hall effect sensors. From the OIS frequency response experiment, the transfer function models of the stage and Hall effect sensor were identified. The weight functions were determined considering the tracking performance, noise attenuation, and stability with considerable margins. The $H_{\infty}$ optimal controller was executed using closed-loop shaping and limiting the controller order, which should be less than 6 for real-time implementation. The control algorithm was verified experimentally and proved to operate as designed.