• Journal of Physiology & Pathology in Korean Medicine
• /
• v.25 no.2
• /
• pp.280-293
• /
• 2011

There is currently increased interest in the identification of antioxidant compounds that are pharmacologically potent and have low or no side effects. Plants produce significant amounts of antioxidants to prevent the oxidative stress caused by photons and oxygen, therefore they represent a potential source of new compounds with antioxidant activity. FARFARE FLOS has been frequently used on the respiratory system including bronchitis, phthisis. In this study, the antioxidant activity of extract from FF was studied in vitro methods by measuring the antioxidant activity by TEAC, measuring the scavenging effects on reactive oxygen species (ROS) [superoxide anion, hydroxyl radical] and on reactive nitrogen species (RNS) [nitric oxide and peroxynitrite] as well as measuring the inhibitory effect on Cu2+-induced human LDL oxidation. The FF extracts were found to have a potent scavenging activity, as well as an inhibitory effect on LDL oxidation. And this study was designed to evaluate whether FFEA may ameliorate oxidative stress and inflammatory status through the antioxidative mechanism in LPS-stimulated RAW 264.7 murine macrophage cell line. Treatment of RAW 264.7 cells with FFEA significantly reduced LPS-stimulated inflammatory response in a dose-dependent manner. In conclusion, the FF extracts have anti-oxidative and anti-inflammatory effects in vitro system, which can be used for developing pharmaceutical drug against oxidative stress and atherosclerosis.

• Asian-Australasian Journal of Animal Sciences
• /
• v.17 no.11
• /
• pp.1509-1517
• /
• 2004

A study was conducted to determine the safety of feeding processed broiler litter (BL) to beef cattle. The litter was processed by deepstacking, ensiling and composting. The health issues addressed relevant to the safety of feeding litter included pathogenic bacteria, mycotoxins, heavy metals, medicinal drugs and pesticide residues. Exp. 1 evaluated the feed hygiene of processed rice hulls-bedded BL. The presence of pathogenic bacteria in BL was determined before and after deepstacking. A total of 21 BL samples were collected over a 3-year period of commercial and experimental production of BL for beef cattle. Exp. 2 evaluated the safety of meat of cattle fed deepstacked BL. In Exp. 1, there were no pathogenic bacteria, such as coliform, E. coli, E. coli O157:H7, Salmonella, Listeria and Proteus, in deepstacked BL. Levels of heavy metals (Cu, Fe, Mn and Zn) and toxic heavy metals (As, Pb, Cd and Hg) were lower than the commercial feed tolerances. Aflatoxin, medicinal drug and pesticide residues were detected at extremely low levels. In Exp. 2, the meat of the BL-fed animals exhibited few differences in all analyzed items from that of the control group, showing safety from pathogenic microorganisms and heavy metals. When BL was withdrawn for 14 days prior to slaughtering the BLfed cattle, no medicinal drug residues were detected in the meat. Pesticides in the tissues of either group of animals were much lower than the tolerances. In conclusion, processed rice hulls-bedded BL and the meat of cattle fed BL were safe from the potential hazards of pathogenic bacteria, heavy metals, aflatoxin, medicinal drugs and pesticide residues.

• Journal of Korean Society for Atmospheric Environment
• /
• v.18 no.6
• /
• pp.539-546
• /
• 2002

The physicochemical properties of solid wastes generated from seven highway service areas, four branch offices, and one construction site were analyzed in concert with air pollutants including heavy metals emitted from near-by small-scale incinerators. The amount of solid wastes generated from highway areas has been increasing with recent increases in the number of highways and passengers. Twelve incinerators examined in this study generally had capacity smaller than 100 kg/hr, most of which were equipped with cyclone for dust removal. It was seen that the concentrations of the gas-phase air pollutants (e.g., SO$_2$, NO$_{x}$, HCl and H$_2$S) were above the acceptable emission standards except one or two sites. CO concentrations at all incinerators were also higher due to incomplete combustion. In addition, particulate matters showed concentration six times higher at their maximum. The results of heavy metal analysis showed that the concentrations of Cu, Cd, and Ni satisfied the emission standards. whereas Pb at one site and Zn at five sites exceeded the standards. Cr measurement results indicated that 9 of 12 incinerators had higher values than the standard; especially one branch office showed nine times higher than normal concentration. In order to satisfy more stringent emission standards in the near future, it is necessary to install air pollution control system and to develop an intensified management plan.n.

• Journal of the Microelectronics and Packaging Society
• /
• v.29 no.4
• /
• pp.41-47
• /
• 2022

Ag sintering technologies have received great attention as it was applied to the inverter of Tesla's electric vehicle Model III. Ag sinter bonding technology has advantages in heat dissipation design as well as high-temperature stability due to the intrinsic properties of the material, so it is useful for practical use of SiC and GaN devices. This study was carried out to understand the sinter joining temperature effect on the robust Ag sintered joints in air without pressure within 10 min. Electroplated Ag finished Cu dies (3 mm × 3 mm × 2 mm) and substrates (10 mm × 10 mm × 2 mm) were introduced, respectively, and nano Ag paste was applied as a bonding material. The sinter joining process was performed without pressure in air with the bonding temperature as a variable of 175 ℃, 200 ℃, 225 ℃, and 250 ℃. As results, the bonding temperature of 175 ℃ caused 13.21 MPa of die shear strength, and when the bonding temperature was raised to 200 ℃, the bonding strength increased by 157% to 33.99 MPa. When the bonding temperature was increased to 225 ℃, the bonding strength of 46.54 MPa increased by about 37% compared to that of 200 ℃, and even at a bonding temperature of 250 ℃, the bonding strength exceeded 50 MPa. The bonding strength of Ag sinter joints was directly influenced by changes in the necking thickness and interfacial connection ratio. In addition, developments in the morphologies of the joint interface and porous structure have a significant effect on displacement. This study is systematically discussed on the relationship between processing temperatures and bonding strength of Ag sinter joints.

• Journal of Korean Society for Atmospheric Environment
• /
• v.21 no.1
• /
• pp.119-129
• /
• 2005

The ambient TSP data measured at Seoul, Incheon. Taean, Daegu, Busan in Korea were used to explain the chemical composition and general features of Asian Dust (AD) observed in Korea. 9 episodes out of 19 were sampled from 2000 through May 2002, and measurements were conducted covering ionic and metal components with mass concentration. The results showed that daily averaged mass concentration (TSP) during the AD episodes was 458 $\mu\textrm{g}$/㎥, and ionic and metal concentrations were 27.93 $\mu\textrm{g}$/㎥ and 71.7 $\mu\textrm{g}$/㎥, respectively, accounting for 6.1 % and 15.5% of the total aerosol mass. TSP concentrations during episodes were varied from 120 to 1742 $\mu\textrm{g}$/㎥ according to the impact of Asian Dusts and had a tendency of showing higher values at sites in the west side of Korea, which can be explained by the effect of diffusion and deposition. In this study, ionic components like Ca (NO$_3$)$_2$, CaSO$_4$, NaNO$_3$, Na$_2$SO$_4$ were prominent types in secondary aerosol during AD periods and also indicated that V, Co as well as soil elements such as Ca, Fe, Mg, Mn, K correlated well with Al, while Cu, Cd, Pb, Zn didn't agree well with it. In addition, enrichment factors (EFs) for each metal component were obtained to provide simple information about source contribution of Asian Dust, and the results were compared with those from other AD studies. In this study, the results showed that aerosol properties in Korea during the Asian Dust were considerably different from those of general atmospheric condition and specially varied from case to case rather than site to site, which implies that there are certain variations in the soil of source region, pathways of air mass, and meteorological condition. For the enhanced study, those factors should be combined with the features of Asian Dust resolved from this study.

• Korean Journal of Food Science and Technology
• /
• v.45 no.3
• /
• pp.274-278
• /
• 2013

The aim of our study was to investigate the chemical composition of the Asian ginseng seed (Panax ginseng C.A. Meyer) and the American ginseng seed (Panax quinquifolium L.) grown in Korea (3 years, KGS3; 4 years, KGS4), China (4 years, CGS4), and USA (4 years, AGS4). AGS had the heaviest 100-seed weight ($4.21{\pm}0.31g$). The approximate compositions of the ginseng seeds were 13.66-17.00% crude protein, 2.21-8.65% crude ash, 19.06-24.06% crude lipid, and 43.21-47.49% crude fiber. The mineral contents of the ginseng seeds were greater in order of K>P>Ca>Mg>Fe>Na>Zn >Cu. The unsaturated fatty acid content was 96.71-96.94%, and the major fatty acids oleic acid and linoleic acid were present. Total sugar content was 15.00-26.17 mg glucose/g. The acidic polysaccharide content was 0.56-0.80 mg ${\beta}$-Dgalacturonic acid/g. These results showed the differences in the physicochemical characteristics of ginseng seeds with respect to cultivation location, cultivation year, and species.

• Fisheries and Aquatic Sciences
• /
• v.19 no.4
• /
• pp.21.1-21.11
• /
• 2016

Background: The evaluation of suitable reference genes as normalization controls is a prerequisite requirement for launching quantitative reverse transcription-PCR (RT-qPCR)-based expression study. In order to select the stable reference genes in abalone Haliotis discus hannai tissues (gill and hepatopancreas) under heavy metal exposure conditions (Cu, Zn, and Cd), 12 potential candidate housekeeping genes were subjected to expression stability based on the comprehensive ranking while integrating four different statistical algorithms (geNorm, NormFinder, BestKeeper, and ${\Delta}CT$ method). Results: Expression stability in the gill subset was determined as RPL7 > RPL8 > ACTB > RPL3 > PPIB > RPL7A > EF1A > RPL4 > GAPDH > RPL5 > UBE2 > B-TU. On the other hand, the ranking in the subset for hepatopancreas was RPL7 > RPL3 > RPL8 > ACTB > RPL4 > EF1A > RPL5 > RPL7A > B-TU > UBE2 > PPIB > GAPDH. The pairwise variation assessed by the geNorm program indicates that two reference genes could be sufficient for accurate normalization in both gill and hepatopancreas subsets. Overall, both gill and hepatopancreas subsets recommended ribosomal protein genes (particularly RPL7) as stable references, whereas traditional housekeepers such as ${\beta}-tubulin$ (B-TU) and glyceraldehyde-3-phosphate dehydrogenase (GAPDH) genes were ranked as unstable genes. The validation of reference gene selection was confirmed with the quantitative assay of MT transcripts. Conclusions: The present analysis showed the importance of validating reference genes with multiple algorithmic approaches to select genes that are truly stable. Our results indicate that expression stability of a given reference gene could not always have consensus across tissue types. The data from this study could be a good guide for the future design of RT-qPCR studies with respect to metal regulation/detoxification and other related physiologies in this abalone species.

• Korean Journal of Medicinal Crop Science
• /
• v.7 no.4
• /
• pp.288-295
• /
• 1999

This experiment was conducted to evaluate the appropriate nutrient solution for hydroponics in Angelica keiskei. The nutrient solutions used were Korean solution, Yamazaki solution, Netherlands solution and open field cultivation. The highest yield of Angelica keiskei was 4, 542kg/10a at Netherlands solution. 'The yield at Netherlands solution was increased about 139 percent, compared to that at open field cultivation. The highest germanium contents was 0. 35ppm at Korean solution. The contents increased 40 percent at Korean solution compare to that at open field cultivation.

• Reproductive and Developmental Biology
• /
• v.34 no.3
• /
• pp.123-126
• /
• 2010

The purpose of present study was to analyze mineral contents in various tissues and investigate theirs relation with bone mineral density (BMD) in rats. Fifteen Sprague-Dawley rats were fed standard diet for 4 weeks. Body weight gain, feed intake, and feed efficiency ratio were 41.00 g/week, 171.15 g/week, and 0.24 respectively. Among 12 minerals in serum, Ca is the highest with 6.86 mg/dl. Serum Mg, Se, and Cu were 2.52 mg/dl, 0.23 mg/dl and 0.22 mg/dl respectively. Mg contents in liver, spleen, and kidney were $246.36\;{\mu}/g$, $105.01\;{\mu}/g$, and $273.38\;{\mu}/g$ respectively. Tibia contents of Ca, Mg, Zn, Fe and V were 194.91 mg/g, 23.10 mg/g, 0.60 mg/g, 0.35 mg/g and 0.14 mg/g respectively. BMDs of right tibia and spine were 122.04 mg/cm and $153.61\;mg/cm^2$. There were significantly positive correlations between tibia BMD and Se (p<0.05), tibia BMD and V (p<0.01), spinal BMD and V(p<0.05), respectively. It's expected that these results are used as a reference data in following study to elucidate physiological function of minerals.

• BMB Reports
• /
• v.38 no.1
• /
• pp.111-114
• /
• 2005

Heat shock proteins (HSPs) are known to protect cells from oxidative stress and other types of injuries. We previously reported the neuroprotective effect of HSP70 following cerebral ischemia and reperfusion using hsp 70.1 knockout (KO) mice. However, the precise role of HSP70 in neuroprotection has not been established yet. The purpose of this study was to investigate the relationship between HSP70 and antioxidant enzymes using hsp 70.1 KO mice. The activities of both SOD-1 and SOD-2 were significantly decreased in hsp 70.1 KO mice than in the wild type (WT) littermates. SOD-1 protein level in the hsp 70.1 KO mice was lower than that of WT. We speculate that HSP70 might be involved in regulation of expression of SOD-1 at the level of transcription or by post-transcriptional modification.