• Title/Summary/Keyword: $CuInS_{2}$

Search Result 2,269, Processing Time 0.035 seconds

Lanthanum Nickelates with a Perovskite Structure as Protective Coatings on Metallic Interconnects for Solid Oxide Fuel Cells

  • Waluyo, Nurhadi S.;Park, Beom-Kyeong;Song, Rak-Hyun;Lee, Seung-Bok;Lim, Tak-Hyoung;Park, Seok-Joo;Lee, Jong-Won
    • Journal of the Korean Ceramic Society
    • /
    • v.52 no.5
    • /
    • pp.344-349
    • /
    • 2015
  • An interconnect is the key component of solid oxide fuel cells that electrically connects unit cells and separates fuel from oxidant in the adjoining cells. To improve their surface stability in high-temperature oxidizing environments, metallic interconnects are usually coated with conductive oxides. In this study, lanthanum nickelates ($LaNiO_3$) with a perovskite structure are synthesized and applied as protective coatings on a metallic interconnect (Crofer 22 APU). The partial substitution of Co, Cu, and Fe for Ni improves electrical conductivity as well as thermal expansion match with the Crofer interconnect. The protective perovskite layers are fabricated on the interconnects by a slurry coating process combined with optimized heat-treatment. The perovskite-coated interconnects show area-specific resistances as low as $16.5-37.5m{\Omega}{\cdot}cm^2$ at $800^{\circ}C$.

Effect of $textsc{k}$-Casein, GMP and Sialic Acid on the Infection of MA-104 Cells by Korean Native Cattle Rotavirus and JBR ($textsc{k}$-Casein, GMP, Sialic Acid가 한우송아지 Rotavirus와 제주도 Bovine Rotavirus(JBR)의 MA-104 세포감염에 미치는 영향)

  • 유제현;김종헌;박범석;유대환;신원선;김세민;지병주;송진욱
    • Food Science of Animal Resources
    • /
    • v.22 no.3
    • /
    • pp.274-280
    • /
    • 2002
  • This study was conducted to investigate inhibitory effects of K-casein, GMP and sialic acid addition on the infection of MA-104 cells by 597(Korean native cattle rotavirus) and JBR(Jeju island bovine rotavirus). MA-104 cells on incomplete Ml99 were infected with domestically separated 597 and ma activated by incubating at 37$\^{C}$ for 6 days, and analyzed for the titer of rotavirus. K-casein, GMP and sialic acid added MA-104 culture infected by activated S97 and nan were incubated for Is hours and stained by the AEC stainning method. The number of infected cells were counted on microscope. The titer of S97 and JBR was 2.5$\times$107 and 2.0$\times$106 PFU/ml, respectively. The inhibition level against cell infection by 597 was 97.4% far 2000UH of K-casein and 97.44% for 2000UM of GMP. The inhibition level against cell infection by JBR was 99.52% for 2000$\mu$M of $\kappa$-casein and 99.78% for 2000$\mu$M of GMP. The inhibition level against cell infection by 597 and JBR was 3.85 and 3.63% for 2000$\mu$M of sialic acid, respectively. The high inhibitory effects (over 97%) of K-casein and CMP against infection of U-1(14 cells with 597 and mR indicated great potentials for the use of K-casein and GMP in the treatment of calf or infant caused by rotavirus.

Experimental Study on Reduction Effects of Non-Point Pollutants by Improvement of Infiltration Capacity of Soil Filter Strip (토양여과대의 침투능 향상을 통한 비점오염물질 저감 효과에 관한 실험적 연구)

  • Woo, Su-Hye;Choi, I-Song;Oh, Jong-Min
    • Korean Journal of Ecology and Environment
    • /
    • v.40 no.2
    • /
    • pp.264-272
    • /
    • 2007
  • Runoff of non-point pollutants has affected bad influence to water quality of river as reaching within short time. For this reason, reducing them prior to reaching aquatic systems or treating them after collection from discharge process of pollutants are desirable for efficient treatment of pollutants. This study was carried out to develop an ecotechnological method to prevent further aggravation of water quality by non-point source through vegetation filter strips. This study has placed a focus on improving infiltration capacity of soil for the optimum condition of vegetation filter strips. Therefore, we used titled soil filter strips instead of vegetation filter strips in this study. The three types of soil tilter strips were used in a bench scale experiment before applying to the field. The reduction efficiency of pollutants in soil filter strips (SS $84.5{\sim}92.5%$, BOD $67.9{\sim}80.6%$, T-N $43.4{\sim}76.6%$, T-P $40.6{\sim}87.4%$, Cu $28.3{\sim}48.1%$ Fe $92.1{\sim}97.7%$, Pb $81.4{\sim}97.3%$) was much higher than that of the controled group. And non-point pollutants reduction efficiency by soil filter strip's forms was estimated to be distinguishing in order of bio material, mixture of sand and gravel and lastly the whole gravel. In the event, the whole reduction efficiency of pollutants on the soil filter strips disclosed good results.

A Review of Industrially Developed Components and Operation Conditions for Anion Exchange Membrane Water Electrolysis

  • Lim, Ahyoun;Cho, Min Kyung;Lee, So Young;Kim, Hyoung-Juhn;Yoo, Sung Jong;Sung, Yung-Eun;Jang, Jong Hyun;Park, Hyun S.
    • Journal of Electrochemical Science and Technology
    • /
    • v.8 no.4
    • /
    • pp.265-273
    • /
    • 2017
  • Solid-state alkaline water electrolysis is a promising method for producing hydrogen using renewable energy sources such as wind and solar power. Despite active investigations of component development for anion exchange membrane water electrolysis (AEMWE), understanding of the device performance remains insufficient for the commercialization of AEMWE. The study of assembled AEMWE devices is essential to validate the activity and stability of developed catalysts and electrolyte membranes, as well as the dependence of the performance on the device operating conditions. Herein, we review the development of catalysts and membranes reported by different AEMWE companies such as ACTA S.p.A. and Proton OnSite and device operating conditions that significantly affect the AEMWE performance. For example, $CuCoO_x$ and $LiCoO_2$ have been studied as oxygen evolution catalysts by Acta S.p.A and Proton OnSite, respectively. Anion exchange membranes based on polyethylene and polysulfone are also investigated for use as electrolyte membranes in AEMWE devices. In addition, operation factors, including temperature, electrolyte concentration and acidity, and solution feed methods, are reviewed in terms of their influence on the AEMWE performance. The reaction rate of water splitting generally increases with increase in operating temperature because of the facilitated kinetics and higher ion conductivity. The effect of solution feeding configuration on the AEMWE performance is explained, with a brief discussion on current AEMWE performance and device durability.

Growth of CdSe thin films using Hot Wall Epitaxy method and their photoelectrical characteristics (HWE방법에 의한 CdSe 박막 성장과 광전기적 특성)

  • Hong, K.J.;Lee, K.K.;Lee, S.Y.;You, S.H.;Shin, Y.J.;Suh, S.S.;Jeong, J.W.;Jeong, K.A.;Shin, Y.J.;Jeong, T.S.;Kim, T.S.;Moon, J.D.;Kim, H.S.
    • Journal of Sensor Science and Technology
    • /
    • v.6 no.4
    • /
    • pp.328-336
    • /
    • 1997
  • The CdSe thin films were grown on the Si(100) wafers by a hot wall epitaxy method (HWE). The source and substrate temperature are $600^{\circ}C$ and $430^{\circ}C$ respectively. The crystalline structure of epilayers was investigated by double crystal X-ray diffraction(DCXD). Hall effect on the sample was measured by the van der Pauw method and studied on the carrier density and mobility dependence on temperature. From Hall data, the mobility was increased in the temperature range 30K to 150K by impurity scattering and decreased in the temperature range 150k to 293k by the lattice scattering. In order to explore the applicability as a photoconductive cell, we measured the sensitivity(${\gamma}$), the ratio of photocurrent to darkcurrent(pc/dc), maximum allowable power dissipation(MAPD), spectral response and response time. The results indicated that the photoconductive characteristic were the best for the samples annealed in Cu vapor compare with in Cd, Se, air and vacuum vapour. Then we obtained the sensitivity of 0.99, the value of pc/dc of $1.39{\times}10^{7}$, the MAPD of 335mW, and the rise and decay time of 10ms and 9.5ms, respectively.

  • PDF

Subgenus classification of Accnthcmoebc by riboprinting (Riboprinting에 의한 가시아메바속의 분류)

  • 정동일;유학선
    • Parasites, Hosts and Diseases
    • /
    • v.36 no.2
    • /
    • pp.69-80
    • /
    • 1998
  • Subgenus classification of Acanthcmoeba remains uncertain. Twenty-three reference strains of Acanthnmoeba including 18 (neo)type-strains were subjected for classification at the subgenus level by riboprinting, PCR/RFLP analysis of 185 rRNA gene (rDNA) . On the dendrogram reconstructed on the basis of riboprint analyses, two type- strains (A. astronwxis and A. tubinshi) of morphological group 1 diverged early from the other strains and were quite distinct from each other. Four type-strains of morphological group 3. A. culbertsoni, A. polestinensis, A. healyi were considered taxonomically valid, but A. pustulosn was regarded as an invalid synonym of A. pclestinensis. Strains of morphological group 2 were classified into 6 subgroups. Among them, A. giulni which has an intron in its 185 rDNA was the most divergent from the remaining strains. Acanthcmoebc ccstellanii Castellani, A. quinc Vil3, A. Iugdunensis L3a. A. poIyphage Jones, A. trinngularis SH621, and A. cqstellanii Ma strains belonged to a subgroup, A. castellanii complex. However, A. quinc and A. Lugnunensis were regarded as synonyms of A. ccstellanii. The Chang strain could be regarded as A. hatchetti. Acanthcmoebo nauritaniensis, A. niuionensis, A. paranivionensis could be considered as synonyms of A. rhwsodes. Neff strain was regarded as A. polyphage rather than as A. castellanii. It is likely that riboprinting can be applied for rapid identification of Acnnthcmoebc isolated from the clinical specimens and environments.

  • PDF

Fabrication and Electrical Properties of Conductive Carbon Black filled Poly(Vinyliden Fluoride) Composite (도전성 카본블랙/PVdF 복합재의 제조 및 전기적 특성)

  • Kim, Myung-Chan;Moon, Seung-Hwan;Lim, Jae-Seok;Hahm, Hyun-Sik;Park, Hong-Soo;Kim, Myung-Soo
    • Journal of the Korean Applied Science and Technology
    • /
    • v.20 no.3
    • /
    • pp.212-220
    • /
    • 2003
  • Electrical properties of carbon filler/PVdF [poly(vinylidene fluoride)] composite were investigated as a funtion of carbon filler/PVdF ratio in the range of 0.2${\sim}$0.5. Three kinds of comercialzied conductive carbon blacks such as Hiblack 41Y, KE300J, and KE600J, and carbon nanofibers prepared by the catalytic chemical vapor deposition of $C_2H_4$ over Ni-Cu catalysts were used as the carbon fillers. The electrical conductivity of carbon filler/PVdF composites were in the range of 0.65 to 13.5 S/cm depending the fillers' electrical conductivity ranging from 5.6 to 23.1 S/cm. Among the carbon fillers used, the KE600J carbon black showed the highest conductivity both in the composite and filler itself because of its high degree of graphitization due to the high-temperature thermal treatment and its high surface area due to the activation treatment.

Optimization of annealing conditions in oxide-precursor-based MOD process for YBCO thin films (산화물 전구체를 이용한 YBCO 박막제조에서 열처리조건의 최적화)

  • Heo S. Y.;Kim Y. K.;Yoo J. M.;Ko J. W.;Hong G. W.;Lee H. G.;Yoo S. I.
    • Progress in Superconductivity
    • /
    • v.6 no.2
    • /
    • pp.118-123
    • /
    • 2005
  • A low cost YBCO oxide powder was employed as a starting precursor for MOD process. YBCO oxide is advantageous over metal acetates or TFA salts which are popular starting precursors for conventional MOD-TFA process because that YBCO oxide precursor is cheap and easy to control molar ratio. YBCO thin films were prepared by this oxide-precursor-based MOD process and annealing condition was optimized. The YBCO thin film annealed at below $780^{\circ}C$ shows no transport $I_c$ and poor microstructure. Raman spectroscopic study of YBCO thin film indicates that YBCO thin film prepared at below $780^{\circ}C$ contains a number of imperfections such as non-superconducting $BaCuO_2$ phase, cation disorder, etc. However, the YBCO thin film treated at above $800^{\circ}C$ shows improvement in microstructure and current transport properties. This research was supported by a grant from Center for Applied Superconductivity Technology of the 21st Century Frontier R&D Program funded by the Ministry of Science and Technology, Republic of Korea.

  • PDF

Influence of Cu(II) on the Growth of Korean Tadpole, Rana nigromaculata (銅이온이 참개구리 幼生의 成長에 미치는 影響)

  • Park, Sang Ock;Sang Gi Kim;Soo Yeul Cho
    • The Korean Journal of Ecology
    • /
    • v.7 no.4
    • /
    • pp.232-238
    • /
    • 1984
  • The author hatched the eggs of Korean frog, Rana nigromaculata in natural water, and reared the tadpoles in natural water as control group and in seven copper ion groups contaminated by 0.1, 0.2, 0.3, 0.4, 0.5, 0.7, and 1.0 ppm of copper ion. The influences of copper ion on the growth of the tadpoles were analyzed, and the results were summarized as follows: 1) The copper ion inhibited the growth of the tadpole. 2) The tadpoles were not survived for 20 days in the copper ion of 0.4~0.5ppm, and in the 0.7ppm, the tadpoles were not survived for 1 day after hatch. 3) The critical lethal concentration of Korean tadpole is regarded as 0.6ppm of copper ion. 4) The growth of head with and body length show a convexin increase pattern. 5) In the growth quantity of head width and body length, that of natural water shows the most rapid increase pattern, and that of the copper ion groups 0.1, 0.2, and 0.3ppm follows in that order. 6) The coefficient of relative growth($\alpha$) of control group is the greatest value, and that of the copper ion groups of 0.1, 0.2, and 0.3ppm follows in that order. The natural water shows the positive allometry, the contaminated groups shows the negative allometry in the relative growth of the contaminated groups to the natural water. 7) Body length shows positive allometry in the relative growth to head width.

  • PDF

Variation of TSP Compositions in Accordance with the Pathways of Inflowing Air Mass at Jeju Island (제주지역 TSP의 기류 유입경로별 조성 변화)

  • Ko, Hee-Jung;Kim, Won-Hyung;Lee, Min-Young;Song, Jung-Min;Kang, Chang-Hee;Kim, Yong-Pyo
    • Journal of Korean Society for Atmospheric Environment
    • /
    • v.27 no.3
    • /
    • pp.347-357
    • /
    • 2011
  • The TSP aerosols were collected at Gosan site of Jeju Island between 2003 and 2007, and their aerosol components were analyzed to examine the variations of chemical compositions with the corresponding pathways of inflowing air parcels. According to the comparison of seasonal aerosol compositions, the soil-originated components showed remarkably high concentrations during spring season. On the other hand, the concentrations of anthropogenic components were somewhat high in spring and summer seasons, but low in fall season. Based on the comparison of TSP compositions in relation to the pathways of inflowing air mass, the concentrations of anthropogenic components (nss-$SO_4^{2-}$, S, $NO_3^-$), soil-originated components (nss-$Ca^{2+}$, Al, Fe, Ca), and the heavy metals (e,g., Mn, Zn, Cr, Pb, Cu, Cd, etc.) have relatively increased with the air mass moving from China continent into Jeju area. Meanwhile, the marine-originated components showed an increasing trend with the air mass coming from North Pacific Ocean. In the seasonal and sectional comparison, the nss-$SO_4^{2-}$, $NO_3^-$, nss-$Ca^{2+}$, and Al showed comparatively high concentrations when the air mass moved from China continent during all seasons. Especially, the $NO_3^-$, nss-$Ca^{2+}$, and Al concentrations were somewhat high when the air mass moved from Korean Peninsula during summer season. It was also recognized that the Na+ concentration were high, when the air mass moved from Pacific Ocean through all seasons.