• 한국산림과학회지
• /
• 제4권1호
• /
• pp.14-16
• /
• 1965

(1) The sterilizing effects of NaF, $CuSO_4$, $CuCO_3$, $HgCl_2$, $ZnSO_4$, and coaltar creosote on the mycelial growth of Irpex consors Berk. Polystictus versicolor L. Fr, Polystictus versicalor L. var. nigricans, and Schizophyllum commune Fr. Were studied. (2) The range of minimum density of the fungicides to check the growth of four fungi mentioned above was as follows; NaF 0.15~0.25(%) $CuSO_4$ 0.20~0.35(%) $CuCO_3$ 0.40~0.50(%) $HgCl_2$ 0.05(%) $ZnSO_4$ 0.40~0.45(%) Creosote 0.10~0.15(%) Of the fungicides tested, $HgCl_2$ was most effective in fungicidal effects, and Creosote, NaF, $CuSO_4$, $ZnSO_4$, $CuCO_3$, followed. The order of resistance of the fungi to the fungicides was as follows: S. Commune Fr. P. Versicalor L. var.nigricans I. Consors Berk P. Versicalor L. Fr. (3) The fungicides were added to the pepton-agor culture medium at the concentration between 0.01 and 0.5%, and the medium was filled into 9cm petridshes. Two square millimeter agar blocks prepared separately from the fungi Contained agar were placed in the middle of the Petri-dishes, in cubated six days at $26^{\circ}C$. Diameter of biggest Colonies were measured.

• 대한화학회지
• /
• 제44권6호
• /
• pp.518-525
• /
• 2000

열린 고리 형태의 질소-산소계 여섯 자리 리간드 1,13-bis(2-hydroxybenzyl)-2,5,9,12-tetraazatridecane-tetrahydrochloride(BSATD${\cdot}$4HCl)와 1,14-bis(2-hydroxybenzyl)-2,6,9,12-tetraazatetradecanetetrahydrochloride(BSATED${\cdot}$4HCl)을 네 개의 염산염으로 합성하여 원소분석, 적외선 분광법, 핵 자기 공명법 및 질량스펙트럼으로 합성을 확인하였다. 합성된 리간드들의 산 해리상수값(log$K^{n}_{H}$)과 Cu(II), Ni(II), Co(II) 및 Zn(II)에 대한 안정도 상수 값 (log$K_{ML}$)을 전위차 적정법으로 구하고, 지방족 아민의 질소 원자들 사이에 에틸렌기와 프로필기를 포함하는 리간드들의 고리길이 효과에 따른 산 해리상수 특성 및 전이금속에 대한 안정도상수값에 미치는 영향을 고찰하였다. 그리고 $[Cu(BSATD)]ClO_4$ 와 $[Cu(BSATED)](ClO_4)_2$구리(II)착물을 합성하여 그 성질을 알아보았다.

• Korean Chemical Engineering Research
• /
• 제49권5호
• /
• pp.530-534
• /
• 2011

회분식 고압반응기에서 메탄올 산화 카르보닐화 방법에 의한 디메틸 카보네이트 제조에 대하여 연구하였다. 다양한 금속의 영향과 구리촉매에 결합된 음이온 및 반응온도, 일산화탄소, 산소의 반응물 몰비, 구리촉매 함유량 등 여러 반응조건들을 검토하였다. 특히 $CuCl_2{\cdot}2H_2O$ 촉매가 1.0 g, $150^{\circ}C$, MeOH/CO/$O_2$=0.2/0.215/0.05(molar ratio) 반응조건에서 메탄올 전환율 65.2%, 선택도 96.6%로 좋은 활성을 보였다. $CuCl_2$는 반응기의 부식을 일으킨다. 이러한 문제점을 개선하기 위하여 DMC 제조에서 담체를 이용한 새로운 촉매시스템을 검토하였다. 여러 종류의 담체중 산성이 큰 제오라이트 Y를 담체로 사용한 경우 가장 활성이 우수하였다. ICP-AES(Inductively Coupled Plasma-Atomic Emission Spectrometer)를 이용해 반응기에 용출된 Fe 양을 비교하였을 때, 제오라이트를 담체로 사용하여 제조된 구리촉매는 $CuCl_2-2H_2O$ 촉매를 직접 사용한 경우에 비해 반응기로 용출되는 철의 양은 5% 이하이었다.

• 한국환경보건학회지
• /
• 제17권1호
• /
• pp.74-78
• /
• 1991

This study was performed to investigate the effect of heavy metals and CN on BOD$_{5}$ measurement. The results were as follows: 1. The BOD$_{5}$ value decreased 20% in Cd(CdCl$_{2}$) 3.0mg/l, Ni(NiCl$_{2}$) 7.0mg/l, Cu(CuCl$_{2}$) 0.5mg/l, Pb($Pb(NO_{3})_{2}$) 9.0mg/l, Cr($K_{2}Cr_{2}O_{7}$) 1.0mg/l respectively. 2. The BOD$_{5}$ value decreased 10% in Zn($Zn(NO_{3})_{2}$) 5 mg/l, Fe(FeCl$_{3}$) 20mg, /l, and 25% in CN(KCN) 5mg/l, and 40% in Hg(HgCl$_{2}$) 0.2rng/l. 3. In Comparion with BOD Rapid Analyzer, the above mentioned heavy metals concentrations have no effect on BOD$_{5}$ value of that analyzer except CN.

• 자원리싸이클링
• /
• 제27권5호
• /
• pp.54-60
• /
• 2018

철 스크랩으로부터 제조되는 철강재의 품질은 재활용 스크랩 중의 미량원소에 의해 악영향을 받는다. 특히 철 스크랩 중의 Cu는 소량이라도 그 영향이 크기 때문에 주의하여야 하는 원소이다. 본 연구에서는 철 스크랩 중의 Cu를 염소가스에 의해 선택적으로 제거할 수 있는 가능성에 대해서 실험실적으로 검토하였다. Cu를 함유하는 모의 철 스크랩을 여러 가지 분위기의 염소가스와 반응시켰다. 실험결과 Cu는 염화되어 증발되었으나, Fe는 염소와 산소의 혼합가스 분위기에서는 표면만 산화되고 염화되지 않았다.

• 대한치과기공학회지
• /
• 제14권1호
• /
• pp.23-43
• /
• 1992

Corrosion characteristics of four commerial gold-based dental alloys(C-1; Au75%, Ag13.9%, Pd3%, Cu & etc.,8.1%, C-2 ;Au 52.08, Ag 24%, Pd 5%, Cu & etc.,18.92, C-3 ; Au 53%, Ag 22%, Pd 5%, Pt 3% Cu & etc.,17%, C-4 ; Au 53%, Pd4, Pt1.5%, Ag & Cu & etc.,41.5%) and four experimental ternary Au-Ag-Cu alloys(E-1 ; Au 50%, Ag 30%, Cu 20%, E-2 ; Au 50%, Ag 20%, Cu 30%, E-3 ; Au 50%, Ag 10%, Cu 40%, E-4 ; Au 50%, Ag 40%, Cu 10%) were investigated by potentiodynamic polarization analysis and the structure was examined by optical microscope and SEM. All corrosion testing was conducted in 1% NaCl solution. The main results are as follows : 1. The corrosion resistence of commercial alloys was decreased in the order of C-1, C-3, C-4, C-2. C-2. 2. The E-1 and E-3 ternary alloys exhibits the higher corrosion resistence than E-2 and E-4 alloys. 3. The cast microstructure of alloys reveals dendrite morphology which shows the significant microsegregation caused by the difference in the diffusion rate between liquid and solid. 4. It is found that the surface corrosion products were mainly AgCl by X-ray diffraction results.

• Journal of Electrochemical Science and Technology
• /
• 제11권1호
• /
• pp.60-67
• /
• 2020

In this study, copper (II) oxide powder for electroplating was prepared by recovering CuCl₂ from NaClO₃ type etching wastes via recovered non-sintering two step chemical reaction. In case of alkali copper carbonate [mCuCo₃·nCu(OH)₂], first reaction product, CuCo₃ is produced more than Cu(OH)₂ when the reaction molar ratio of sodium carbonate is low, since m is larger than n. As the reaction molar ratio of sodium carbonate increased, m is larger than n and Cu(OH)₂ was produced more than CuCO₃. In the case of m has same values as n, the optimum reaction mole ratio was 1.44 at the reaction temperature of 80℃ based on the theoretical copper content of 57.5 wt. %. The optimum amount of sodium hydroxide was 120 g at 80℃ for production of copper (II) oxide prepared by using basic copper carbonate product of first reaction. At this time, the yield of copper (II) oxide was 96.6 wt.%. Also, the chloride ion concentration was 9.7 mg/L. The properties of produced copper (II) oxide such as mean particle size, dissolution time for sulfuric acid, and repose angle were 19.5 mm, 64 second, and 34.8°, respectively. As a result of the hole filling test, it was found that the copper oxide (II) prepared with 120 g of sodium hydroxide, the optimum amount of basic hydroxide for copper carbonate, has a hole filling of 11.0 mm, which satisfies the general hole filling management range of 15 mm or less.

• 한국자원리싸이클링학회:학술대회논문집
• /
• 한국자원리싸이클링학회 2004년도 춘계임시총회 및 제23회 학술대회
• /
• pp.59-65
• /
• 2004

동제련 공정중 Smelting에서 SiO2가 없으면 산화에 의한 생성물은 Molten Cu-Fe-O 'Oxysulphide' 와 Solid Magnetite가 된다. 이 생성물은 Cu-rich Liquid와 Cu-dilute Liquid로 분리가 불가능하다. Smelting의 목적이 Cu가 높은 Matte와 산화된 불순물의 효과적인 분리에 있으므로 이와 같은 분리가 불가능한 혼합상태를 분리해 주어야 한다. 이때 SiO2가 첨가되면 Cu-rich 상인 Matte가 FeO-rich상인 Slag로의 분리가 가능해진다. 이러한 의미에서 동제련에 있어서 규사의 성분은 매우 중요하며 현재 재생사를 규사로 대체 사용하고 있다. 한편 실리콘 모노머 합성 공정인 금속 규소와 접촉 물질(Contact Mass, 구리촉매와 조촉매)을 반응시켜 (Si+CH3Cl ${\rightarrow}$ (CH3)2SiCl3) 실리콘 모노머를 생산하는 공정중 반응이 끝난 접촉물질인 구리 폐촉매가 발생되는데 주요성분이 Cu 12%, Si80%로 재생사와 유사하여 동제련에 투입 가능 여부를 판단하기 위하여 각 공정에서의 용융실험을 통하여 결론을 도출하였고, 실 조업 Test를 거쳐 처리하게 되므로 구리 회수 및 폐기물로써의 매립을 중지 할 수 있었다.

• Bulletin of the Korean Chemical Society
• /
• 제17권9호
• /
• pp.845-849
• /
• 1996

Bis(N,N-dimethyl-2-aminomethylthiophenium)tetrahalocuprate(Ⅱ) salt, (dmamtH)2CuCl4 and (dmamtH)2CuBr4 were prepared and characterized by spectroscopic (IR, UV-Vis, EPR, XPS), electrochemical method, and magnetic susceptibility measurement. The experimental results reveal that the compounds have pseudotetrahedral symmetry around copper(Ⅱ) site due to the steric hinderance of the bulky 2-(dimethylaminomethyl)thiophene in the complex. The N-H…Cl type hydrogen bonding is expected in (dmamtH)2CuCl4 from the XPS and IR data. Magnetic susceptibility data show that both of the compounds follow Curie-Weiss law in the range of 77-300 K with negative Weiss constant exhibiting antiferromagnetic interaction between copper(Ⅱ) ions in solid state.

• 한국재료학회지
• /
• 제26권11호
• /
• pp.604-610
• /
• 2016

We report on the fabrication and characterization of a novel $Cu_2O/CuO$ heterojunction structure with CuO nanorods embedded in $Cu_2O$ thin film as an efficient photocathode for photoelectrochemical (PEC) solar water splitting. A CuO nanorod array was first prepared on an indium-tin-oxide-coated glass substrate via a seed-mediated hydrothermal synthesis method; then, a $Cu_2O$ thin film was electrodeposited onto the CuO nanorod array to form an oxide semiconductor heterostructure. The crystalline phases and morphologies of the heterojunction materials were examined using X-ray diffraction and scanning electron microscopy, as well as Raman scattering. The PEC properties of the fabricated $Cu_2O/CuO$ heterojunction photocathode were evaluated by photocurrent conversion efficiency measurements under white light illumination. From the observed PEC current density versus voltage (J-V) behavior, the $Cu_2O/CuO$ photocathode was found to exhibit negligible dark current and high photocurrent density, e.g. $-1.05mA/cm^2$ at -0.6 V vs. $Hg/HgCl_2$ in $1mM\;Na_2SO_4$ electrolyte, revealing the effective operation of the oxide heterostructure. The photocurrent conversion efficiency of the $Cu_2O/CuO$ photocathode was estimated to be 1.27% at -0.6 V vs. $Hg/HgCl_2$. Moreover, the PEC current density versus time (J-T) profile measured at -0.5 V vs. $Hg/HgCl_2$ on the $Cu_2O/CuO$ photocathode indicated a 3-fold increase in the photocurrent density compared to that of a simple $Cu_2O$ thin film photocathode. The improved PEC performance was attributed to a certain synergistic effect of the bilayer heterostructure on the light absorption and electron-hole recombination processes.