• Particle and aerosol research
• /
• v.13 no.1
• /
• pp.33-40
• /
• 2017

Cobalt-iron oxides have emerged as alternative electrode materials for supercapacitors because they have advantages of low cost, natural abundance, and environmental friendliness. Graphene loaded with cobalt ferrite ($CoFe_2O_4$) nanoparticles can exhibit enhanced specific capacitance. In this study, we present three-dimensional (3D) crumpled graphene (CGR) decorated with $CoFe_2O_4$ nanoparticles. The $CoFe_2O_4$-graphene composites were synthesized from a colloidal mixture of GO, iron (III) chloride hexahydrate ($FeCl_3{\cdot}6H_2O$) and cobalt chloride hexahydrate ($CoCl_2{\cdot}6H_2O$) respectively, via one step aerosol spray pyrolysis. Size of $CoFe_2O_4$ nanoparticles was ranged from 5 nm to 10 nm when loaded onto 500 nm CGR. The electrochemical performance of the $CoFe_2O_4$-graphene composites was examined. The $CoFe_2O_4$-graphene composite electrode showed the specific capacitance of $253F\;g^{-1}$.

• Journal of the Korean Crystal Growth and Crystal Technology
• /
• v.20 no.2
• /
• pp.69-73
• /
• 2010

The microstructural change of the $Sm_{0.5}Sr_{0.5}CoO_3$ (SSC) electrode for a cathode material of solid oxdie fuel cells (SOFCs) deposited by the electrostatic spray deposition (ESD) technique was characterized. Samarium chloride hexahydrate $(SmCl_3{\cdot}6H_2O)$, strontium chloride hexahydrate $(SrCl_2{\cdot}gH_2O)$, cobalt nitrate hexahydrate $(Co(No_3)_2{\cdot}6H_2O)$ as starting materials and methyl alcohol as solvent were used to make precursor solution. The suitable porous SSC films for a cathode of SOFCs were deposited on Si substrate and it is observed that the microstructure was strongly dependent on processing parameters such as deposition time, substrate temperature, and applied voltage. Scanning Electron Microscope (SEM) and X-ray Diffractometer (XRD) measurement were used to investigate the microstructure and crystallinity of the SSC films. The ESD technique is shown to be an efficient method in which the SOFCs' cathode film can be fabricated with the desired phases and microstructure.

• Journal of the Korean Chemical Society
• /
• v.41 no.9
• /
• pp.465-470
• /
• 1997

A chiral pentadentate ligand, 1,9-bis(S)-prolyl-1,9-dioxo-2,5,8-triaza-nonane, (S,S-prochen) which shows the stereospecific reaction was synthesized from the reaction of S-proline and diethylenetriamine (dien). The red-violet $[Co(SS-prodien)H_2O]ClO_4$ was prepared by the oxidation of the aqueous solution dissolving $CoCl_2{\cdot}6H_2O$ and S,S-prodien. Elemental analysis, electronic absorption spectroscopy, and $^{13}C-NMR$ spectroscopy suggest that the geometrical structure of the Co(III) complex to be an ${\alpha}{\beta}$ (ffm) form, where the dien moiety of the ligand chelates the metal center to comprise a facial isomer, and an aqua ligand coordinates a cis site to the secondary nitrogens of the dien. Based upon the CD spectroscopic analysis, it seems that the absolute configuration of the ${\alpha}{\beta}$(ffm)-$[Co(SS-prodien)H_2O]ClO_4$ has the ${\Lambda}$-form.

• Korean Journal of Food Science and Technology
• /
• v.10 no.4
• /
• pp.380-386
• /
• 1978

Enzymatic characteristics of glucose isomerase from Streptomyces spp. K-14 were studied. The optimum pH and temperature of the enzyme reaction are $pH\;7.5{\sim}8.0$ and $70^{\circ}{\sim}75^{\circ}C$, respectively, in the presence of 5 mM $MgSO_4{\cdot}7H_2O$ and 2 mM $CoCl_2{\cdot}6H_2O$. The enzyme activity was activated by both $Mg^{++}$ and $Co.^{++}\;Mg^{++}$ is required for the initial activation of the isomerization reaction, whereas $Co^{++}$ was essential for the increased stability of the enzyme protein. Glucose concentration up to 60% did not affect the reaction velocity as well as the equilibrium conversion of the enzyme.

• Journal of the Korean Chemical Society
• /
• v.44 no.6
• /
• pp.518-525
• /
• 2000

The open-chain hexadentate N$_4$, O$_2$ ligands 1,13-bis(2-hydroxybenzyl)-2,5,9,12-tetraazatridecane-tetrahydrochloride (BSATD${\cdot}$4HCl) and 1,14-bis (2-hydroxybenzyl)-2,6,9,12-tetraazatetradecane-tetrahydrochloride (BSATED${\cdot}$ 4HCl) have been synthesized as their tetrahydrochloride salt and characterized by EA, IR, NMR and Mass. Their proton dissociation constants(log$K^{n}_{H}$) and stability constants(log$K_{ML}$) for Cu(II), Ni(II), Co(II), and Zn(II) ions were determined in aqueous solution by potentiometry and compared with those of analogous N$_4$, O$_2$ ligands contain ethylenic spacers or propylenic spacers, which make six-membered chelate rings between the aliphatic nitrogen atoms. Synthesis and characterization of [Cu(BSATD)]ClO$_4$ and [Cu(BSATED)](ClO$_4$)$_2$ complexes are described.

• Microbiology and Biotechnology Letters
• /
• v.23 no.6
• /
• pp.647-651
• /
• 1995

A tylosin-hyperproductive mutant of S. fradiae MNU20 was isolated among 3500 strains obtaincd from either MNNG- or UV-treated Streptomyces fradiae NRRL2702. The composition of optimal medium for tylosin production was formulated as followed as: 4 g soluble starch, 1 g glucose, 1 g corn steep liquor, 7.5 ml soy bean oil, 0.2 g KH$_{2}$PO$_{4}$, 1 g Na$_{2}$S$_{2}$O$_{3}$$\cdot $5H$_{2}$O, 2 g CaCO$_{3}$, 2 g NaCl, 0.001 g CoCl$_{2}$$\cdot $6H$_{2}$O in 1 liter of distilled water. With the optimal medium, S. fradiae MNU20 was able to produce 159 mg tylosin (g biomass)$^{-1}$, indicating that tylosin productivity of Streptomyces fradiae NRRL2702 was increased 14 times higher by mutation. When the effect of valine, succinate, and natural zeolite on tylosin production was investigated by using the optimal medium, these substances essentially enhanced tylosin production and their addition time during culture period appeared to be critical for the increase of tylosin production.

• Microbiology and Biotechnology Letters
• /
• v.22 no.2
• /
• pp.175-181
• /
• 1994

A bacterial strain producing highly viscous polysaccharide(A29 POL) was isolated from soil and identified sa Bacillus sp. A29. The cultural conditions of the Bacillus sp. A29 for the polysaccharide prouction were dextrin 12%, soytone 0.2%, SnCl$_{2}$ $\cdot $2H$_{2}$O 0.02%, Na$_{2}$HPO$_{4}$ $\CDOT $12H$_{2}$O 0.36%, L-alanine 0.01%, initial pH6.8, and 30$\circ $C at pH 3 FOR 4 days. Final viscosity of the culture broth was 65, 000 cp and then the amount of produced polysaccharide was 8.3 g/l. A29 POL was composed of glucose and xylose. A29 POL showed high viscosity at low concentration(0.1%) and in the presence of the salts such as NaCl or CaCl$_{2}$. A29 POL showed high viscosity acid condition and at alkali condition and high pseudoplasticity in the presence of a NaCl or CaCl$_{2}$. It was shown that the viscosity at high temperature(80$\circ $C) was decreased but it was recovered at low temperature (20$\circ $C. A29 POL was able to from film and gel in the presence of MgSO$_{4}$ $\CDOT $7H$_{2}$O, Na$_{2}$CO$_{3}$ \CDOT $H$_{2}$O, MnSO$_{4}$ $\CDOT $ 7H$_{2}$O. A29 POL had anionic charge.

• Applied Biological Chemistry
• /
• v.30 no.1
• /
• pp.77-87
• /
• 1987

The mutant with high productivity, X. malvacearum SNUF 560-6, was acquired from the X. malvacearum SNUF 560 with low productivity by UV-light irradiation. It was preserved is lyophilized stock culture and it was transferred to PDA slant to maintain viability fortnightly. Fermentations were started by retransfering to MY agar slant from PDA stok culture. The experiments for optimal xanthan gum production were studied in a chemically defined medium. Of the carbon and nitrogen sources tested, 0.4% sucrose medium and 10mM glutamic acid medium yielded the highest xanthan gun production respectively. The addition of 10g/l succinic acid stimulated xanthan gum production. Also 65mM $PO_4\;^{-3}\;(12.6g/l\;KH_2PO_4)$ was effective on xanthan gum production. Finally, medium 1 and medium 2 which have high xanthan gum production potencies were achieved in this stud. The components of medium 1 and medium 2 were as follows: Medium 1 : sucrose 40g/l glutamate 10mM $PO_4\;^{-3}\;54mM\;(KH_2PO_4\;12.65g/l)$ Citrate 2g/l $MgSO_4{\cdot}7H_2O\;0.2g/l$ $H_3BO_3\;0.005/l$ ZnO 0.006/l $FeCl_2{\cdot}6H_2O\;0.0024g/l$ $CaCO_3\;0.02g/l$ Medium 2 : $Sucrose\;40g/l\;(NH_4)_2SO_4\;2g/l$ $PO_4\;^{-3}\;65mM\;(KH_2PO_4\;12.65g/l)$ Succinate 10g/l $MgSO_4{\cdot}7H_2O\;0.02g/l$ $H_3BO_3\;0.06g/l$ ZnO 0.006g/l $FeCl_2{\cdot}6H_2O\;0.0024g/l$ $CaCO_3\;0.02g/l$.

• Journal of the Korean Chemical Society
• /
• v.34 no.5
• /
• pp.460-464
• /
• 1990

Proton behavior was investgated for the redox reaction of trans-[$Co(en)_2(NO_2)Cl]^+$ with aqueous Fe(II) in acidic solution by UV/vis-spectrophotometric method. The reaction order of proton is first one and the rate constant(k$_H^+$) is 6.7 ${\times}\;10^{-1}L^2/mol^2{\cdot}min$. The values of $E_a$, ${\{Delta}H^{\neq}$, ${\{Delta}S^{\neq}$ are 14.5 Kcal/mol, 13.8 Kcal/mol and -18.3e.u., respectively. As the result of analysis of kinetic data, it has been found that this reaction proceeds through inner-sphere mechanism.

• Reproductive and Developmental Biology
• /
• v.35 no.3
• /
• pp.319-327
• /
• 2011

This study investigated whether the addition of porcine sperm cytosolic factor (SCF) at fusion/activation affects in vitro development of porcine parthenogenetic(PA) and nuclear transfer (NT) embryos. To determine the optimum concentration of SCF, control group of oocytes was activated with 0.3M mannitol (1.0 mM $CaCl_2{\cdot}2H_2O$), other three groups of oocytes were parthenogentically activated with the fusion medium (0.1mM $CaCl_2{\cdot}2H_2O$) supplemented with 100, 200 or 300 ${\mu}$g/ml SCF, respectively. Matured oocytes were activated with two electric pulses (DC) of 1.2 kv/cm for 30 ${\mu}$sec. The activated embryos were cultured in PZM-3 under 5% $CO_2$ in air at $38.5^{\circ}C$ for 6 days. Oocytes activated in the presence of SCF showed a significantly higher blastocyst rate than control (p<0.05). Apoptosis rate was significantly lower in 100 ${\mu}$g/ml SCF group than other groups (p<0.05). Cdc2 kinase activity in control and SCF treatment group of oocytes was determined using MESACUP cdc2 kinase assay kit at 1, 5, 10, 15, 30, 45 and 60 min after activation. Cdc2 kinase activity was significantly decreased (p<0.05) in SCF group than MII oocytes or control within 5 min. For NT embryo production, reconstructed oocytes were fused in the fusion medium supplemented with 0.1 mM $CaCl_2{\cdot}2H_2O$ (T1), 1.0 mM $CaCl_2{\cdot}2H_2O$ (T2) and 0.1 mM $CaCl_2{\cdot}2H_2O$ with 100 ${\mu}$g/ml SCF (T3). Fused embryos were cultured in PZM-3 under 5% $CO_2$ in air at $38.5^{\circ}C$ for 6 days. Developmental rate to blastocyst stage was significantly higher in T3 than other groups (23.0% vs. 13.5 to 15.2%) (p<0.05). Apoptosis rate was significantly lower in T3 than T1 or T2 (p<0.05). The relative abundance of Bax-${\alpha}$/Bcl-xl was significantly lower in in vivo or SCF group than that of control (p<0.05). Moreover, the expression of p53 and caspase3 mRNA was significantly lower in in vivo or SCF group than that of control (p<0.05). These results indicate that the addition of SCF at fusion/activation might improve in vitro development of porcine NT embryos through regulating cdc2 kinase level and expression of apoptosis related genes.