• Korean Journal of Soil Science and Fertilizer
• /
• v.32 no.4
• /
• pp.333-343
• /
• 1999

To investigate the relationship between the translocation and distribution the monovalent K and Na and the divalent Sr and Ca, the natrophile and calcitrophic plant sugar beet (Beta vulgaris L.) was used. Strontium uptake and distribution are concentration and growth stage dependent. The highest Ca content occurred in the treatment of 4 : 1 mM ratio of Ca to Sr, while the highest Sr content in old leaves in the presence of 1 mM Ca and 4 mM Sr. The addition of low concentration of Sr stimulates Ca-uptake. Reversely. Sr-uptake is highest in the presence of 1 mM Ca. This result may be an antagonistic effect between Ca and Sr. The ratios of Mg to Ca and Sr are satisfactorily presented by the regression analysis. The sum of Sr and Ca contents are most significant linear to the ratio of Mg to one, showing a negative correlation. This result implies that the absorption of Mg and Ca or Sr is antagonistic. In the presence of only 5 mM Sr, K and Na-uptakes increases, while Sr in the presence of Ca does not affect the change in the K and Na assimilation and their ratios. The ratios of K to Na is also not changed. A little addition of Sr could more effectively retain the chlorophyll loss while only in the presence of Sr, the chlorophyll levels are considerably reduced.

• Journal of the Semiconductor & Display Technology
• /
• v.5 no.4 s.17
• /
• pp.5-9
• /
• 2006

The SCT thin films are deposited on Pt-coated electrode($Pt/TiN/SiO_2/Si$) using RF sputtering method with Sr/Ca ratio. The maximum grain of thin films is obtained by ratio of Ca at 15 mol%. The dielectric constant was increased with increasing the ratio of Ca, while it was decreased if the ratio of Ca exceeded over 15 mol%. The dielectric constant changes almost linearly in temperature ranges of $-80{\sim}+90$. All SCT thin films used in this study show the phenomena of dielectric relaxation with the increase of frequency, and the relaxation frequency is observed above 200 kHz. The current-voltage characteristics of SCT thin films showed the increasing leakage current as the measuring temperature increases.

• 한국정보디스플레이학회:학술대회논문집
• /
• 2009.10a
• /
• pp.181-183
• /
• 2009

Comparative study of the dependence of the firing voltage of MgSrO and MgCaO protective layers on chemical composition was carried out. It was observed that the firing voltage increases when CaO/MgO or SrO/MgO ratio increases.

• Electrical & Electronic Materials
• /
• v.9 no.7
• /
• pp.680-689
• /
• 1996

SrCaCuO와 BiPbCuO 화합물로 이루어진 이중층시료가 만들어 졌으며, 소결과정에서 나타나는 확산과 입자간의 상호작용으로 108K의 임계온도를 나타내었다. 이 시료는 820.deg. C에서 0-210 시간동안 소결되었다. 초전도체의 생성, 성장메카니즘과 임계온도의 관계가 연구되었으며, 최적조건은 820.deg. C에서 210시간 소결하고 SrCaCuO와 BiPbCuO의 도포비가 1:0.6인 시편에서 나타났다. 또한 이중층시료에서 가장 좋은 조성비는 S $r_{2}$C $a_{2}$C $u_{2}$ $O_{x}$와 B $i_{1.9}$P $b_{0.5}$C $u_{3}$ $O_{y}$ 이었다.다.

• Journal of the Korean Institute of Electrical and Electronic Material Engineers
• /
• v.16 no.11
• /
• pp.1029-1034
• /
• 2003

The Bi$_2$Sr$_2$Ca$_{n}$Cu$_{n+1}$ O$_{x}$, superconducting thin films arc fabricated by using the sputtering and evaporation method. Because we confirmed the sticking ratio of Bi element in the Bi$_2$Sr$_2$Ca$_{n}$Cu$_{n+1}$ O$_{x}$ superconducting thin film fabricated by using the sputtering method was much lower than the expected value, to get the enough number of the flakes of Bi, faraday cup was used to evaporate Bi clement. As a result of the fabrication, Bi 2201 and Bi 2212 single phases could be made by the optima of deposition condition. And we confirmed the sticking coefficient of Bi element was clearly related to the temperature change of the substrate and the generation of Bi22l2 phase

• Proceedings of the Korean Institute of Electrical and Electronic Material Engineers Conference
• /
• 2002.07b
• /
• pp.597-600
• /
• 2002

Electrical properties of $\{(Sr_xCa_{1-x})_{0.95-y-z}Bi_2Pb_{0.05+y}\})Ti_{1.02}O_3$ ceramic were studied as a function of Sr/Ca ratio and Bi, Pb contents. Dielectric properties of specimens with different x, y, z values were explained in terms of ionic polarizability with Molecular Additionally Rules and Clausius-Mosotti equation. For the composition of $\{(Sr_{0.62}Ca_{0.38})_{0.90}Bi_{0.01}Pb_{0.09}\})Ti_{1.02}O_3$ and $\{(Sr_{0.62}Ca_{0.38})_{0.905}Bi_{0.015}Pb_{0.08}\})Ti_{1.02}O_3$, dielectric constant$({\varepsilon}_r)$, quality factor(Q) and temperature coefficient(TC) were 389, 3048, -1490 and 394, 1869, -1340 at 1MHz, respectively.

• Journal of Ceramic Processing Research
• /
• v.19 no.6
• /
• pp.461-466
• /
• 2018

The effects of Ca/Sr ratio and the sintering temperature on the properties of $(Ca_xSr_{(1-x)})ZrO_3$ (CSZ) ceramics were investigated in this study. CSZ ceramics were prepared using solid-state reaction process, which were sintered in air at temperatures ranging from $1350^{\circ}C$ to $1450^{\circ}C$. Their structures were characterized by X-ray Diffraction (XRD), Scanning Electron Microscopy (SEM), and Transmission Electron Microscopy (TEM). The change in Ca/Sr ratio significantly affected the crystalline phase and the dielectric properties of the $(Ca_xSr_{(1-x)})ZrO_3$ ceramics. The secondary phase, $Ca_{0.15}Zr_{0.85}O_{1.85}$, was observed and increased correspondingly with the rising of sintering temperatures. In order to understand the effects of secondary phase on the dielectric properties of CSZ ceramics, the $Ca_{0.15}Zr_{0.85}O_{1.85}$ phase was prepared individually using solidstate method. The $Ca_{0.15}Zr_{0.85}O_{1.85}$ ceramics sintered at $1500^{\circ}C$ for 2 hours possessed a dielectric constant (${\varepsilon}_r$) of 21.7, a dielectric loss ($tan{\delta}$) of $49.510^{-4}$ and an Insulation Resistance (IR) of $2.1{\times}10^{10}{\Omega}$. The ($Ca_{0.7}Sr_{0.3})ZrO_3$ ceramics exhibited the best dielectric properties, with a permittivity of 29, a dielectric loss ($tan{\delta}$) of $2.7{\times}10^{-4}$, and an Insulation Resistance (IR) of $2.6{\times}10^{12}{\Omega}$.

• Journal of Soil and Groundwater Environment
• /
• v.27 no.2
• /
• pp.76-86
• /
• 2022

Calcium (Ca) and potassium (K) were introduced to remove Sr and Cs in soil, respectively. Four factor and three level Box-Bhenken design was employed to determine the optimal washing condition of Ca- and K-based solutions, and the ranges tested were 0.1 to 1 M of Ca or K, L/S ratio of 5 to 20, washing time of 0.5 to 2 h, and pH of 2 to 7. The optimal washing condition determined was 1 M of Ca or K, L/S ratio of 20, washing time of 1 h, and pH of 2, and Ca-based and K-based solutions showed 68 and 81% removal efficiency for Sr and Cs, respectively in soil. For comparison, widely used conventional washing agents such as 0.075 M EDTA, 0.01 M citric acid, 0.01 M oxalic acid, and 0.05 M phosphoric acid were tested, and they showed 25 to 30% of Sr and Cs removal efficiency. Tessier sequential extraction was employed to identify the changes in chemical forms of Sr and Cs during the washing. In contrast to the conventional washing agents, Ca-based and K-based solutions were able to release relatively strongly bound forms of Sr and Cs such as Fe/Mn-oxide and organic matter bound forms, suggesting the involvement of direct substitution mechanism, probably due to the physicochemical similarities between Sr-Ca and Cs-K.

• Korean Chemical Engineering Research
• /
• v.44 no.3
• /
• pp.284-288
• /
• 2006

$(Ca,Sr)_{2-y}MgSi_2O_7:Eu^{2+}{_y}$ (CMS) phosphor particles were prepared by using a spray pyrolysis process. The luminescent property was optimized by changing the content of Eu and the post-treatment temperature. The luminescence characteristics were also monitored with changing the ratio of Ca to Sr. The pure tetragonal $Ca_2MgSi_2O_7$ or $Sr_2MgSi_2O_7$ particles were obtained when the post-treatment temperature was over $1,000^{\circ}C$. The highest emission intensity of CMS particles were achieved when the concentration (y) of Eu and the treatment temperature were 0.05 and $1,250^{\circ}C$,respectively. The emission wavelength $({\lambda}_{max})$ of ${(Ca_{1-x},Sr_x)}_{1.95}MgSi_2O_7:{Eu^{2+}}_{0.05}$ was gradually shifted from 524 nm to 456 nm with increasing the content of Sr due to the reduction of crystal field strength. The emission intensity and its width of $Sr_2MgSi_2O_7:Eu$ was greatly enhanced by substituting Ca of less than 10 mol％ for Sr without any significant peak shift. The morphology of as-prepared particles was spherical, but changed to irregular-shaped one after the post treatment at the temperature range from 900 at $1,300^{\circ}C$.

• Analytical Science and Technology
• /
• v.11 no.4
• /
• pp.248-253
• /
• 1998

The adsorption and separation behaviors of alkali, alkaline earth and transition metal ions using a poly-dibenzo-18-crown-6 were investigated in aqueous solution. The adsorption degree(E) and distribution ratio(D) of alkali, alkaline earth metal ions were Li(I)$t_R$) of metal ions were affected by the adsorption degree(E) and distribution ratio(D). This results showed good separation efficiency of K(I), Sr(II), Ag(I) and Pb(II) from the mixed metal solution.