• Journal of the Korean Magnetics Society
• /
• v.2 no.3
• /
• pp.244-250
• /
• 1992

Iron nitride $Fe_4N$ by partial substitution of nitrogen by carbon was prepared by nitriding the iron oxalate whose thermal decomposition gives a carburating atmosphere. Iron oxalates, the precursors, were prepared by precipitation and co-precipitation. The size and shape of the carbonitride particles could be controlled by modifying the conditions of preparation of the oxalate precursor. From the results of electron micrographs, it is clear that the $Fe_4N$ pigment particle maintains the original shape(needle shape) of the starting materials and that it consists of fine unit particles which link together to form a stereo-network structure. An investigation of the $Fe^{II}_3\;Fe^I_{1-x}\;Sn_xN_{1-y}C_y$ solid solution has shown that Sn plays the role of a growth inhibitor of the elementary microcrystallites of the iron carbonitride. The coercive force and saturation magnetization of iron carbonitride obtained from co-precipitated iron oxalate were 500 Oe and 120 emu/g, respectively.

• Journal of Chest Surgery
• /
• v.29 no.10
• /
• pp.1066-1075
• /
• 1996

To compare the efficacy of cardiac preservation, we examined purine metabolites during 24 hours of cold storage($0^{\circ}C$) of the Korean ongrel dog hearts after using three different types of cardioplegic solutions. The hypothermic arrest with total cardiopulmonAry bypass method was employed in 51. Thomas solution(575) and blood cardioplegic solution(BCPS) preservation cases. Specimens were analyzed for levels of adenine nucleotides and their precursors by high performance liquid chromatography. The ATP content in the UW(University of Wisconsin) solution group tends to be higher than that of the combined hypothermic arrest group(575 and BCPS groups) after 2,4,8, and 12 hours of preservation respectively, but there were no significant differences between 575 and BCPS groups. The ADP contents in the UWS and BCPS groups were higher than that of the 575 group at 4,8, 12, and 24 hours, but the difference was not statistically significant between UWS and BCPS groups. The AMP contents did not change significantly in the three groups. The adenosine, Inosine, and hypoxanthine concentrations increased progressively, but the lev l of xanthine was very low in the three groups.

• Journal of the Institute of Electronics Engineers of Korea SD
• /
• v.37 no.4
• /
• pp.7-14
• /
• 2000

A Bi$_{4}$Ti$_{3}$O$_{12}$ (BIT) thin film is prepared by sol-gel method using acetate precursors and evaluated whether it could be applied to NVFRAM (Non-Volatile Ferroelectric RAM). The drying and the annealing temperature are 40$0^{\circ}C$ and $650^{\circ}C$, respectively and they are determined from the DT-TG (Differential Thermal-Thermal Gravimetric) analysis. The BIT thin film deposited on Pt/Ta/SiO$_{2}$/Si substrate shows orthorhombic perovskite phase. The grain size and the surface roughness are about 100 nm and 70.2$\AA$, respectively. The dielectric constant and the loss tangent at 10 KHz are 176 and 0.038, respectively, and the leakage current density at 100 ㎸/cm is 4.71 $mutextrm{A}$/$\textrm{cm}^2$. In the results of hysteresis loops measured at $\pm$250 ㎸/cm, the remanent polarization (Pt) and the coercive field (Ec) are 5.92 $\mu$C/$\textrm{cm}^2$ and 86.3 ㎸/cm, respectively. After applying 10$^{9}$ square pulses of $\pm$5V, the remanent polarization of the BIT thin film decreases as much as about 33% from 5.92 $\mu$C/$\textrm{cm}^2$ of initial state to 3.95 $\mu$C/$\textrm{cm}^2$.

• Korean Journal of Fisheries and Aquatic Sciences
• /
• v.14 no.1
• /
• pp.7-14
• /
• 1981

Secondary amines are known as one of the precursors of nitrosamines which are potent carcinogenic compounds for human being and animals. In this study, trimethylamine and dimethylamine contents of salted, hot-air dried and sun dried samples of two commercial fishes, mackerel pike and seerfish were analyzed and quantitatively compared at three different temperature conditions. The formation of both secondary amines was more rapid at$10^{\circ}C\;and\;15^{\circ}C\;than\;at\;2^{\circ}C$. Residual amounts of trimethylamine oxide of salted samples were relatively higher than those of the other samples. Trimethylamine contents of hot-air dried mackerel pike and sun dried seerfish were relatively higher than those in the other samples, while those of salted samples were comparatively lower than those of others. Dimethylamine contents of hot-air dried samples were higher than those of the other samples, whereas those of salted samples were comparatively lower than those of the other samples.

• Proceedings of the Korean Institute of Electrical and Electronic Material Engineers Conference
• /
• 2009.06a
• /
• pp.52-52
• /
• 2009

To date, chalcogenide alloy such as $Ge_2Sb_2Te_5$(GST) have not only been rigorously studied for use in Phase Change Random Access Memory(PRAM) applications, but also temperature gap to make different states is not enough to apply to device between amorphous and crystalline state. In this study, we have investigated a new system of phase change media based on the In-Sb-Te(IST) ternary alloys for PRAM. IST chalcogenide thin films were prepared in trench structure (aspect ratio 5:1 of length=500nm, width=100nm) using Tri methyl Indium $(In(CH_3)_4$), $Sb(iPr)_3$ $(Sb(C_3H_7)_3)$ and $Te(iPr)_2(Te(C_3H_7)_2)$ precursors. MOCVD process is very powerful system to deposit in ultra integrated device like 100nm scaled trench structure. And IST materials for PRAM can be grown at low deposition temperature below $200^{\circ}C$ in comparison with GST materials. Although Melting temperature of 1ST materials was $\sim 630^{\circ}C$ like GST, Crystalline temperature of them was ~$290^{\circ}C$; one of GST were $130^{\circ}C$. In-Sb-Te materials will be good candidate materials for PRAM applications. And MOCVD system is powerful for applying ultra scale integration cell.

• Progress in Superconductivity
• /
• v.8 no.1
• /
• pp.93-97
• /
• 2006

YBCO films were deposited on a moving substrate by a spray pyrolysis method using nitrate aqueous solution as precursors. Deposition was made on $LaAlO_3$(100) single crystal substrate by spraying precursor droplets generated by a concentric nozzle. The cation ratio of precursor solution was Y:Ba:Cu=1:2.65:4.5. The distance between nozzle and substrate was 15 cm. Substrate was transported with a speed ranging from 0.23 cm/min to 0.5 cm/min. Films were deposited at the pressure ranging from 10 Torr to 20 Torr and the deposition temperature was ranged from $740^{\circ}C\;to\;790^{\circ}C$. Oxygen partial pressure was controlled between 1 Tow and S Torr. Superconducting YBCO films were obtained from $740^{\circ}C\;to\;790^{\circ}C$ with an oxygen partial pressure of 3 Torr. Scanning electron microscope(SEM) and X-ray diffraction(XRD) observation revealed that films are smooth and highly texture with(001) plans parallel to substrate plane. Highest Jc was 0.72 $MA/cm^2$ at 77K and self-field for the film with a thickness of 0.15 m prepared at a substrate temperature of $740^{\circ}C$ and $PO_2$=3 Torr.

• Journal of Powder Materials
• /
• v.25 no.2
• /
• pp.151-157
• /
• 2018

In this study, the compound $Li_3BO_3$ (LBO) is intended to be prepared by a polymeric complex method as a sintering aid for the densification of $Li_7La_3Zr_2O_{12}$ (LLZ) solid electrolyte. A polymeric precursor containing Li and B is heat-treated in an air atmosphere at a temperature range between $600^{\circ}C$ and $800^{\circ}C$. Instead of LBO, the compound $Li_{2+x}C_{1-x}B_xO_3$ (LCBO) is unexpectedly synthesized after a heat-treatment of $700^{\circ}C$. The effect of LCBO addition on sintering behavior and ion conductivity of LLZ is studied. It is found that the LCBO compound could lead to significant improvements in the densification and ionic conductivity of LLZ compared to pure LLZ. After sintering at $1100^{\circ}C$, the density of the LLZ-12wt%LBO composite is $3.72g/cm^3$, with a high Li-ion conductivity of $1.18{\times}10^{-4}Scm^{-1}$ at $28^{\circ}C$, while the pure LLZ specimen had a densify of $2.98g/cm^3$ and Li-ion conductivity of $5.98{\times}10^{-6}Scm^{-1}$.

• Journal of Physiology & Pathology in Korean Medicine
• /
• v.22 no.4
• /
• pp.891-895
• /
• 2008

Natural substances have recently received much attention as therapeutic drugs to prevent many diseases in humans because they avoid the many side effects of treatment with chemical compounds. We examined the effect of water extract of deer antler in RANKL-induced osteoclast differentiation. The effects of water extract of deer antler in osteoclast differentiation were determined by culture of bone marrow macrophages (BMMs). The mRNA expression levels of c-Fos, NFATc1, TRAP, and GAPDH in BMMs were analyzed by RT-PCR. Cell lysates were obtained from the treated cells, the expression levels of c-Fos and NFATc1 were determined by western blotting with antibodies for c-Fos and NFATc1. Water extract of deer antler greatly inhibited RANKL-mediated osteoclast differentiation in osteoclast precursors without cytotoxicity. Water extract of deer antler inhibited the expression of c-Fos and NFATc1 in BMMs treated with RANKL. Our findings suggest that water extract of deer antler inhibited osteoclast differentiation by suppressing c-Fos and NFATc1 expression in response to RANKL. These results demonstrate that water extract of deer antler may be a useful the treatment of bone-related disease such as osteoporosis.

• Journal of Nutrition and Health
• /
• v.27 no.4
• /
• pp.347-355
• /
• 1994

Indolo[3,2-b]carbazole(ICZ) is a potent Ah receptor agonist with biological activities similar in several respects to those of the potent environmental toxin, TCDD. ICZ is produced during the oilgomerization of indole-3-carbinol(I3C), a breakdown product of the glucobrassicin present in food plants of the Brassica genus. In the present study we examined ICZ levels in tissues and excreta of rats treated with I3C or dietary cabbage of established glucobrasicin content, and in feces of conventional and germfree rats fed on a basal diet, and of humans. We also examined the levels of cytochrome P4501A1 induction, as determined by the ethoxyresorufin ο-deethylase assay, in tissues of animals that received cabbage-supplemented diets, or which were treated with purified I3C or ICZ. Our findings indicated that incorporation of either homogenized or whole freeze-dried cabbage in the feed led to large increases(16-60 fold) in the levels of ICZ in the feces and lower gastrointestinal tract of rats. We observed that whereas ICZ is readily detectable at about the same levels(2.00$\pm$0.50 ppb) in the feces of conventional rats fed on a purified diet and in human feces, levels of ICZ in the feces of germfree animals fed on the basal diet were at the limits of detection(0.40$\pm$0.20 ppb), indication that gut bacteria are important for the production of ICZ from essential dietary constituents in the basal diet. We showed that in contrast to the near 7000-fold difference in CYP1A1 inducing potencies of ICZ and TCDD in cells in culture, their inducing potencies differ by only about an order of magnitude in rats. Nonetheless, the levels of ICZ remaining in livers twenty hours after I3C treatment appear too low to account for the induced activity. This result indicates that ICZ may be rapidly cleared from the liver or that substances other than, or in addition to, ICZ be responsible for the enzyme-inducing activity of orally administered I3C or its precursors.

• Journal of Powder Materials
• /
• v.18 no.3
• /
• pp.277-282
• /
• 2011

[ $LiCoO_2$ ] a cathode material for lithium rechargeable batteries, was prepared using recycled $Co_3O_4$. First, the cobalt hydroxide powders were separated from waste WC-Co hard metal with acid-base chemical treatment, and then the impurities were eliminated by centrifuge method. Subsequently, $Co_3O_4$ powders were prepared by thermal treatment of resulting $Co(OH)_2$. By adding a certain amount of $Li_2CO_3$ and $LiOH{\cdot}H_2O$, the $LiCoO_2$ was obtained by sintering for 10 h in air at $800^{\circ}C$. The synthesized $LiCoO_2$ particles were characterized by X-ray diffraction (XRD) and Scanning Electron Microscope (SEM) analysis.