• Asian-Australasian Journal of Animal Sciences
• /
• 제27권11호
• /
• pp.1615-1622
• /
• 2014

An accurate assessment of moisture content in feed ingredients is important because moisture influences the nutritional evaluation of feedstuffs. The objective of this study was to evaluate various methods for moisture content determination. In Exp. 1, the weight loss on drying (LOD) of corn, soybean meal (SBM), distillers dried grains with solubles (DDGS), whey permeate, whey powder, spray-dried porcine plasma (SDPP), fish meal, and a mixed diet of these 7 ingredients were measured by oven drying at $135^{\circ}C$ for 2 h. Additionally, the samples were dried at $105^{\circ}C$ for 3, 6, 9, 12, or 15 h. The LOD contents of the DDGS, whey permeate, and whey powder measured by drying at $135^{\circ}C$ for 2 h were greater than the values measured by drying at $105^{\circ}C$ for 3 h (p<0.05). All samples except SDPP (p = 0.70) dried at $105^{\circ}C$ for 6, 9, 12, or 15 h caused more LOD compared with the samples dried for at $105^{\circ}C$ for 3 h (p<0.05). The LOD contents of the individual ingredients were additive when dried at $105^{\circ}C$ regardless of drying time. In Exp. 2, moisture contents of corn, SBM, wheat, whey permeate, whey powder, lactose, and 2 sources of DDGS (DDGS1 and DDGS2) were measured by the Karl Fischer method, oven drying at $135^{\circ}C$ for 2 h, and oven drying at $125^{\circ}C$, $115^{\circ}C$, $105^{\circ}C$, or $95^{\circ}C$ for increasing drying time from 1 to 24 h. Drying samples at $135^{\circ}C$ for 2 h resulted in higher moisture content in whey permeate (7.5% vs 3.0%), whey powder (7.7% vs 3.8%), DDGS1 (11.4% vs 7.5%), and DDGS2 (13.1% vs 8.8%) compared with the Karl Fischer method (p<0.05). Whey permeate and whey powder were considerably darkened as the drying time increased. In conclusion, drying samples at $135^{\circ}C$ for 2 h is not appropriate for determining the moisture content in whey permeate, whey powder, or DDGS as well as the mixed diet containing these ingredients. The oven-drying method at $105^{\circ}C$ for 5 to 6 h appears to be appropriate for whey permeate and whey powder, and at $105^{\circ}C$ for 2 to 3 h for DDGS.

• Bulletin of the Korean Chemical Society
• /
• 제7권5호
• /
• pp.338-341
• /
• 1986

Hydrocarbon solution of $Ir(PPh_3)_2(CO)OClO_3$ reacts with $Ph_2PC_6H_4$-o-CHO and 3-methyl-2-aminopyridinyl aldimine to yield ${\bar{Ir(Ph_2PC_6H_4-o-CO)}}\;(PPh_3)_2(CO)(H)ClO_4$(1) and ${\bar{Ir(NC_6H_6NC}}C_6H_5)(PPh_3)_2(CO)(H)ClO_4$(2), respectively. The compound $Ir(PPh_3)_2N_2Cl$ also reacts with $Ph_2PC_6H_4$-o-CHO and 3-methyl-2-aminopyridinyl aldimine to give ${\bar{Ir(Ph_2PC_6H_4-o-C}}O)(PPh_3)_2(H)Cl(3)$ and $Ir(NC_6H_5NCC_6H_5(PPh_3)_2(H)Cl(4)$, respectively. Compounds 1, 2, 3, and 4 were characterized by infrared, $^1H$ NMR, $^{31}p$ NMR, UV spectra, and conductivity measurements.

• 대한수학회지
• /
• 제43권2호
• /
• pp.323-356
• /
• 2006

Let X and Y be vector spaces. It is shown that a mapping $f\;:\;X{\rightarrow}Y$ satisfies the functional equation $$mn_{mn-2}C_{k-2}f(\frac {x_1+...+x_{mn}} {mn})$$ $(\ddagger)\;+mn_{mn-2}C_{k-1}\;\sum\limits_{i=1}^n\;f(\frac {x_{mi-m+1}+...+x_{mi}} {m}) =k\;{\sum\limits_{1{\leq}i_1<... if and only if the mapping $f : X{\rightarrow}Y$ is additive, and we prove the Cauchy-Rassias stability of the functional equation $(\ddagger)$ in Banach modules over a unital $C^*-algebra$. Let A and B be unital $C^*-algebra$ or Lie $JC^*-algebra$. As an application, we show that every almost homomorphism h : $A{\rightarrow}B$ of A into B is a homomorphism when $h(2^d{\mu}y) = h(2^d{\mu})h(y)\;or\;h(2^d{\mu}\;o\;y)=h(2^d{\mu})\;o\;h(y)$ for all unitaries ${\mu}{\in}A,\;all\;y{\in}A$, and d = 0,1,2,..., and that every almost linear almost multiplicative mapping $h:\;A{\rightarrow}B$ is a homomorphism when h(2x)=2h(x) for all $x{\in}A$. Moreover, we prove the Cauchy-Rassias stability of homomorphisms in $C^*-algebras$ or in Lie $JC^*-algebras$, and of Lie $JC^*-algebra$ derivations in Lie $JC^*-algebras$.

• Elastomers and Composites
• /
• 제53권2호
• /
• pp.75-79
• /
• 2018

ZnS:Mn-glycine (ZnS:Mn-Gly) nanocomposites were synthesized by capping ZnS:Mn nanocomposites with glycine. Zinc sulfate heptahydrate ($ZnSO_4{\cdot}7H_2O$), glycine ($C_2H_5NO_2$), manganese sulfate monohydrate ($MnSO_4{\cdot}H_2O$), and sodium sulfide ($Na_2S$) were used as the source reagents. $ZnS:Mn-Gly-C_{60}$ nanocomposites were obtained by heating the ZnS:Mn-Gly nanocomposites and fullerene ($C_{60}$) at a 2:1 mass ratio in an electric furnace at $700^{\circ}C$ for 2 h. X-ray diffraction (XRD) was used to characterize the crystal structure of the synthesized nanocomposites. The photocatalytic activity of the $ZnS:Mn-Gly-C_{60}$ nanocomposites was evaluated, via the degradation of brilliant green (BG) dye under 254 nm irradiation, with a UV-vis spectrophotometer.

• 멤브레인
• /
• 제14권3호
• /
• pp.201-206
• /
• 2004

열화학적 IS 공정에서 요오드화수소의 분해에 적용하기 위하여 화학증착법(CVD)으로 제조된 silica 막의 안정성을 HI-$H_2O$ 기상 혼합물에서 평가하였다. Si 원천으로 tetraethoxysilane을 사용하여 서로 다른 CVD 온도로 기공크기가 100 nm인 $\alpha$-alumina를 처리하였다. CVD온도는 $700^{\circ}C$, $650^{\circ}C$, $600^{\circ}C$이었다. $600^{\circ}C$에서 수행한 단일 성분의 투과 실험에서 측정한 막의 $H_2$/$N_2$ 선택도는 CVD 온도 $700^{\circ}C$의 M1 막은 43.2, $650^{\circ}C$의 M2 막은 12.6, $600^{\circ}C$의 M3 막은 8.7을 나타내었다. HI-$H_2O$ 기상 혼합물에서 안정성 실험은 $450^{\circ}C$에서 수행하였는데, CVD 온도 $650^{\circ}C$에서 처리된 막이 다른 온도에서 처리된 막보다 더 안정성이 더 좋은 결과를 얻었다.

• 한국연소학회:학술대회논문집
• /
• 한국연소학회 1997년도 제15회 KOSCO SYMPOSIUM 논문집
• /
• pp.89-102
• /
• 1997

대향류 확산 화염의 매연 생성 특성에 대한 실험적 연구가 수행되었으며, 그 결과 에틸렌 ($C_2H_4$)-프로판($C_3H_8$) 혼합 연료의 경우 매연 생성 상승 효과 (synergistic effect)가 관측되었다. 프로판과 에틸렌의 PAH 생성 양상이 상이하게 나타났으며, 소량의 프로판을 에틸렌 확산 화염에 첨가할 경우 순수 연료에 비하여 매연 및 PAH (다중 고리 방향족 탄화수소; polycyclic aromatic hydrocarbon) 생성이 증대되었다. 단조적으로 변화하는 아세틸렌($C_2H_2$) 농도와 단열 화염 온도를 고려할 때, 이러한 결과는 HACA (H-abstraction-$C_2H_2$-addition) 반응만으로는 확산 화염에서의 매연 발생 및 성장을 설명할 수 없음을 의미한다. 수치해석과 실험 결과의 비교로부터 초기 PAH의 생성 과정을 규명하였으며 이 과정에서 C3 화학종의 재결합 반웅이 매우 중요함을 확인할 수 있었다. 또한, 이러한 C3 화학종과 C2 화학종의 상호 보완적인 역할에 의하여 에틸렌-프로판 혼합 연료에서 매연 생성이 증대됨을 밝혔다.

• 센서학회지
• /
• 제21권3호
• /
• pp.167-171
• /
• 2012

Ag- and Pd-loaded $SnO_2$ nanowire network sensors were prepared by the growth of $SnO_2$ nanowires via thermal evaporation, the coating of slurry containing $SnO_2$ nanowires, and dropping of a droplet containing Ag or Pd nanoparticles, and subsequent heat treatment. All the pristine, Pd-loaded and Ag-loaded $SnO_2$ nanowire networks showed the selective detection of $C_2H_5OH$ with low cross-responses to CO, $H_2$, $C_3H_8$, and $NH_3$. However, the relative gas responses and gas selectivity depended closely on the catalyst loading. The loading of Pd enhanced the responses($R_a/R_g$: $R_a$: resistance in air, $R_g$: resistance in gas) to CO and $H_2$ significantly, while it slightly deteriorated the response to $C_2H_5OH$. In contrast, a 3.1-fold enhancement was observed in the response to 100 ppm $C_2H_5OH$ by loading of Ag onto $SnO_2$ nanowire networks. The role of Ag catalysts in the highly sensitive and selective detection of $C_2H_5OH$ is discussed.

• 대한화학회지
• /
• 제24권2호
• /
• pp.108-114
• /
• 1980

정전기적모델과 결합의 단순한 부가성을 이용하여 아주 극성인 화합물의 표준생성열$({\Delta}H_f\;^{\circ})$를 계산하는 간단한 방법을 제안하였다. 이 ${\Delta}H_f\;^{\circ}$에 대한 할로메탄의 bond 기여도는 각각 ${\Delta}H_f\;^{\circ}(C-F)=-36.44\;kcal/mole,\;{\Delta}H_f\;^{\circ}(C-Cl)=-2.57\;kcal/mole,\;{\Delta}H_f\;^{\circ}(C-Br)=5.32\;kcal/mole,\;{\Delta}H_f\;^{\circ}(C-I)=19.18\;kcal/mole,\;and\;{\Delta}H_f\;^{\circ}(C-H)=-3.61\;kcal/mole$로 얻어졌고 이 갑들과 정전기적 에너지들로부터 계산한 ${\Delta}H_f\;^{\circ}$는 실험치와 잘 일치함을 보였다.

• 한국재료학회지
• /
• 제24권1호
• /
• pp.53-59
• /
• 2014

The corrosion resistance of submerged entry nozzle (SEN) materials were investigated for high-class steel manufacturing. Composite samples were fabricated by mixing $ZrO_2$, $Al_2O_3$, MgO, mullite, spinel, and carbon. The raw materials were mixed with attrition milling, compacted in a uniaxial pressure of 200MPa and calcined at $1000^{\circ}C$ for 3 h in $N_2$ atmosphere. The bulk density and apparent porosity of the calcined samples were measured by the liquid displacement method in water using Archimedes's principle. The corrosion resistance of the samples were measured by cup test with mold powder at $1550^{\circ}C$ for 2 h. The microstructure and elemental analysis of samples were observed by scanning electron microscopy (SEM), energy dispersive spectrum (EDS), and X-ray diffraction pattern (XRD). The XRD result shows that the starting raw materials were crystalline phase. The microstructure of fabricated specimen was investigated before and after corrosion tests at $1000^{\circ}C$ and $1550^{\circ}C$ for 2h. $ZrO_2$-C composite showed good resistance in the slag corrosion test. Among the composite oxide materials, $ZrO_2-Al_2O_3$-C and $ZrO_2$-MgO-C showed better resistance than $ZrO_2$-C in the slag corrosion test. The diameter variation index of $ZrO_2$-C refractory was 16.1 at $1000^{\circ}C$ for 2 h. The diameter variation index of the $ZrO_2-Al_2O_3$-C refractory was larger than that of the $ZrO_2$-C refractory at $1550^{\circ}C$ for 2 h.

• 한국해양공학회지
• /
• 제11권1호
• /
• pp.44-48
• /
• 1997

During studies of the ripening reaction of titanium oxalate, a new crystalline phase has been found. The crystal system was determined to be orthormbic with space group $C222_1$. The unit cell parameters were refined to a=10.503(2)$\AA$ b=15.509(3)$\AA$ c=9.7000(1)$\AA$. The chemical formula of the crystal is Ti$_{2}$O$_{2}$(C$_{2}$O$_{4}$)(OH)$_{2}$. H$_{2}$O. When heated to temperatures between 31$0^{\circ}C$ and 38$0^{\circ}C$, the material became amorphous. Heated above 41$0^{\circ}C$ converted it into anatase-type titanium dioxide.