• Archives of Pharmacal Research
• /
• 제29권10호
• /
• pp.849-858
• /
• 2006

Previous screening of the pharmacological action of Gastrodia elata (GE) root (Orchidaceae) showed that methanol (MeOH) extracts have significant anti-inflammatory properties. The antiinflammatory agents of GE, however, remain unclear. In this experiment, MeOH extracts of GE were fractionated with organic solvents for the anti-inflammatory activity-guided separation of GE. Eight phenolic compounds from the ether (EtOEt) and ethyl acetate (EtOAc) fractions were isolated by column chromatography: 4-hydroxybenzaldehyde (I), 4-hydroxybenzyl alcohol (II), benzyl alcohol (III), bis-(4-hydroxyphenyl) methane (IV), 4(4'-hydroxybenzyloxy)benzyl-methylether (V), 4-hydroxy-3-methoxybenzyl alcohol (VI), 4-hydroxy-3-methoxybenzaldehyde (VII), and 4-hydroxy-3-methoxybenzoic acid (VIII). To investigate the anti-inflammatory and anti-oxidant activity of these compounds, their effects on carrageenan-induced paw edema, arachidonic acid (AA)-induced ear edema and analgesic activity in acetic acid (HAc)-induced writhing response were carried out in vivo; cyclooxygenase (COX) activity, reactive oxygen species (ROS) generation in rat basophilic leukemia (RBL 2H3) cells and 1,1-diphenyl-2-picryl-hydroazyl (DPPH) scavenging activity were determined in vitro. These phenolic compounds not only had anti-inflammatory and analgesic properties in vivo, but also inhibited COX activity and silica-induced ROS generation in a dose-dependent manner. Among these phenolic compounds, compound VII was the most potent anti-inflammatory and analgesic. Compound VII significantly inhibited silica-induced ROS generation and compound VI significantly increased DPPH radical scavenging activity. Compounds I, II and III significantly inhibited the activity of COX-I and II. These results indicate that phenolic compounds of GE are anti-inflammatory, which may be related to inhibition of COX activity and to anti-oxidant activity. Consideration of the structure-activity relationship of the phenolic derivatives from GE on the anti-inflammatory action revealed that both C-4 hydroxy and C-3 methoxy radicals of benzyl aldehyde play an important role in anti-inflammatory activities.

• 마이크로전자및패키징학회지
• /
• 제17권1호
• /
• pp.25-31
• /
• 2010

본 연구에서는 무연 솔더 중 우수한 특성을 보여 실용화된 Sn-3.0Ag-0.5Cu 조성의 솔더를 사용하여 2주 동안의 시효조건에서 W의 함량이 무전해 Ni-W-P 도금층과 솔더와의 계면에서의 IMC 생성에 미치는 영향에 대해서 조사하였다. 도금층내 인의 함량은 8 wt.%로 고정하였고, 텅스텐의 함량은 각각 0, 3, 6 및 9 wt.%로 변화시켰으며, 모든 시료는 $255^{\circ}C$에서 리플로우한 후, $200^{\circ}C$에서 2주 동안 시효처리하였다. 각각의 시료에서 $(Cu,Ni)_6Sn_5$와 $(Ni,Cu)_3Sn_4$의 IMC가 관찰되었으며, 시효처리시간의 증가에 따라 UBM과 무연납의 계면에서 생성된 IMC가 증가함을 보였고, W의 함량이 높을수록 열적 안정성이 증가하여 $Ni(W)_3P$의 생성 속도를 늦춰 그에 따른 영향으로 IMC의 두께가 증가함을 보였다.

• 한국재료학회:학술대회논문집
• /
• 한국재료학회 2011년도 춘계학술발표대회
• /
• pp.15-15
• /
• 2011

As you know, boron compounds, borax ($Na_2B_4O_5(OH)_4{\cdot}8H_2O$) etc. were known thousands of years ago. As for natural boron, it has two naturally occurring and stable isotopes, boron 11 ($^{11}B$) and boron 10 ($^{10}B$). The neutron absorption $^{10}B$ is included about 19~20% with 80~81% $^{11}B$. Boron is similar to carbon in its capability to form stable covalently bonded molecular networks. The mass difference results in a wide range of ${\beta}$ values between the $^{11}B$ and $^{10}B$. The $^{10}B$ isotope, stable with 5 neutrons is excellent at capturing thermal neutrons. For example, it is possible to decrease a thermal neutron required for the nuclear reaction of uranium 235 ($^{235}U$). If $^{10}B$ absorbs a neutron ($^1n$), it will change to $^7Li+^1{\alpha}$ (${\alpha}$ ray, like $^4He$) with prompt ${\gamma}$ ray from $^{11}B$ $^{11}B$ (equation 1). $$^{10}B+^1n\;{\rightarrow}\;^{11}B\;{\rightarrow}\; prompt \;{\gamma}\;ray (478 keV), \;^7Li+4{\alpha}\;(4He)\;\;\;\;{\cdots}\; (1)$$ If about 1% boron is added to stainless steel, it is known that a neutron shielding effect will be 3 times the boron free steel. Enriched boron or $^{10}B$ is used in both radiation shielding and in boron neutron capture therapy. Then, $^{10}B$ is used for reactivity control and in emergency shutdown systems in nuclear reactors. Furthermore, boron carbide, $B_4C$, is used as the charge of a nuclear fission reaction control rod material and neutron cover material for nuclear reactors. The $B_4C$ powder of natural B composition is used as a charge of a control material of a boiling water reactor (BWR) which occupies commercial power reactors in nuclear power generation. The $B_4C$ sintered body which adjusted $^{10}B$ concentration is used as a charge of a control material of the fast breeder reactor (FBR) currently developed aiming at establishment of a nuclear fuel cycle. In this study for new boron compound, silicon boride ceramics for capturing thermal neutrons, preparation and characterization of both silicon tetraboride ($SiB_4$) and silicon hexaboride ($SiB_6$) and ceramics produced by sintering were investigated in order to determine the suitability of this material for nuclear power generation. The relative density increased with increasing sintering temperature. With a sintering temperature of 1,923 K, a sintered body having a relative density of more than 99% was obtained. The Vickers hardness increased with increasing sintering temperature. The best result was a Vickers hardness of 28 GPa for the $SiB_6$ sintered at 1,923K for 1 h. The high temperature Vickers hardness of the $SiB_6$ sintered body changed from 28 to 12 GPa in the temperature range of room temperature to 1,273 K. The thermal conductivity of the SiB6 sintered body changed from 9.1 to 2.4 W/mK in the range of room temperature to 1,273 K.

• Archives of Pharmacal Research
• /
• 제29권4호
• /
• pp.282-286
• /
• 2006

Ochnaflavone is a medicinal herbal product isolated from Lonicera japonica that inhibits cyclooxygenase-2 (COX-2) dependent phases of prostaglandin $D_2(PGD_2)$ generation in bone marrow-derived mast cells (BMMC) in a concentration-dependent manner with $IC_{50}$ values of $0.6{\mu}M$. Western blotting probed with specific anti-COX-2 antibodies showed that the decrease in quantity of the $PGD_2$ product was accompanied by a decrease in the COX-2 protein level. In addition, this compound consistently inhibited the production of leukotriene $C_4 (LTC_4)$ in a dose dependent manner, with an $IC_{50}$ value of $6.56 {\mu}M$. These results demonstrate that ochnaflavone has a dual cyclooxygenase-2/5-lipoxygenase inhibitory activity. Furthermore, this compound strongly inhibited degranulation reaction in a dose dependent manner, with an $IC_{50}$ value of $3.01{\mu}M$. Therefore, this compound might provide a basis for novel anti-inflammatory drugs.

• 한국진공학회:학술대회논문집
• /
• 한국진공학회 2016년도 제50회 동계 정기학술대회 초록집
• /
• pp.150-150
• /
• 2016

Mankind is enjoying a great convenience of their life by the rapid growth of secondary industry since the Industrial Revolution and it is possible due to the invention of huge power such as engine. The automobile which plays the important role of industrial development and human movement is powered by the Engine Module, and especially Diesel engine is widely used because of mechanical durability and energy efficiency. The main work mechanism of the Diesel engine is composed of inhalation of the organic material (coal, oil, etc.), combustion, explosion and exhaust Cycle process then the carbon compound emissions during the last exhaust process are essential which is known as the major causes of air pollution issues in recent years. In particular, COx, called carbon oxide compound which is composed of a very small size of the particles from several ten to hundred nano meter and they exist as a suspension in the atmosphere. These Diesel particles can be accumulated at the respiratory organs and cause many serious diseases. In order to compensate for the weak point of such a Diesel Engine, the DPF(Diesel Particulate Filter) post-cleaning equipment has been used and it mainly consists of ceramic materials(SiC, Cordierite etc) because of the necessity for the engine system durability on the exposure of high temperature, high pressure and chemical harsh environmental. Ceramic Material filter, but it remains a lot of problems yet, such as limitations of collecting very small particles below micro size, high cost due to difficulties of manufacturing process and low fuel consumption efficiency due to back pressure increase by the small pore structure. This study is to test the possibility of new structure by direct infiltration of SiC Whisker on Carbon felt as the next generation filter and this new filter is expected to improve the above various problems of the Ceramic DPF currently in use and reduction of the cost simultaneously. In this experiment, non-catalytic VS CVD (Vapor-Solid Chemical Vaporized Deposition) system was adopted to keep high mechanical properties of SiC and MTS (Methyl-Trichloro-Silane) gas used as source and H2 gas used as dilute gas. From this, the suitable whisker growth for high performance filter was observed depending on each deposition conditions change (input gas ratio, temperature, mass flow rate etc.).

• Bulletin of the Korean Chemical Society
• /
• 제15권6호
• /
• pp.460-465
• /
• 1994

New silicon-monosubstituted (${\eta}^4$-2,3,4,5-tetraphenyl-l-silacyclopentadiene)transi tion metal complexes are described. (7-Alkyl-7-silanorbornadienyl)MLn(Alkyl=Methyl: MLn=CpRu$(CO)_2$: Alkyl=Methyl: MLn=CpNi(CO): Alkyl=Ethyl: MLn=CpNi(CO)) complexes were prepared from the corresponding silole-transition metal complexes with dimethylacetylenedicarboxylate. Cycloaddition products were obtained with 2,3-dimethyl-1,3-butadiene, 2,3-butanedione, and 1,4-benzoquinone through the ruthenium-substituted silylene. We have determined the crystal structure of (1-methyl-2,3,4,5-tetraphenyl-l-silacyclopentadien yl)cyclopentadienyldicarbonylruthenium by using graphite monochromated Mo-Ka radiation. The compound was crystallized in the monoclinic space group $P2_{1/c}$ with a = 9.838(l), b = 15.972(3), c = 18.327(3) ${\AA}$, and ${\beta}= 94.28(l)^{circ}$. The ruthenium moiety CpRu$(CO)_2$ on silicon is in an axial position.

• Asian-Australasian Journal of Animal Sciences
• /
• 제26권8호
• /
• pp.1189-1196
• /
• 2013

Adipose tissue development and function play a critical role in the regulation of energy balance, lipid metabolism, and the pathophysiology of metabolic syndromes. Although the effect of zinc ascorbate supplementation in diabetes or glycemic control is known in humans, the underlying mechanism is not well described. Here, we investigated the effect of a zinc-chelated vitamin C (ZnC) compound on the adipogenic differentiation of 3T3-L1 preadipocytes. Treatment with ZnC for 8 d significantly promoted adipogenesis, which was characterized by increased glycerol-3-phosphate dehydrogenase activity and intracellular lipid accumulation in 3T3-L1 cells. Meanwhile, ZnC induced a pronounced up-regulation of the expression of glucose transporter type 4 (GLUT4) and the adipocyte-specific gene adipocyte protein 2 (aP2). Analysis of mRNA and protein levels further showed that ZnC increased the sequential expression of peroxisome proliferator-activated receptor gamma ($PPAR{\gamma}$) and CCAAT/enhancer-binding protein alpha (C/$EBP{\alpha}$), the key transcription factors of adipogenesis. These results indicate that ZnC could promote adipogenesis through $PPAR{\gamma}$ and C/$EBP{\alpha}$, which act synergistically for the expression of aP2 and GLUT4, leading to the generation of insulin-responsive adipocytes and can thereby be useful as a novel therapeutic agent for the management of diabetes and related metabolic disorders.

• Asian-Australasian Journal of Animal Sciences
• /
• 제20권3호
• /
• pp.432-439
• /
• 2007

Thiazolidinediones (TZDs) act as potent activators of the adipose differentiation program in established preadipose cell lines. TZD's have also been investigated in diabetic patients and reported to act as PPAR-${\gamma}$ ligands. In this report, the effects of TZDs on the differentiation pathway of myoblasts have been investigated. C2C12 mouse myoblasts were grown in Dulbecco's Modified Eagles medium for 4-5 days until they reached almost 100% confluency. Post-confluent cells (day 0) were further exposed to adipogenic induction medium along with TZDs for 48 hours. Thereafter, cells were exposed only to TZDs every 48 h until day 10. The control was provided with differentiation medium without any treatment. Alterations in the cells during the differentiation programme were analyzed on the basis of fusion index, oil-red-o staining, adipocyte index, adipocyte stain uptake measurement, immuno-histochemistry and western blotting. Exposure of C2C12 mouse myoblasts to TZDs prevented the expression of myosin heavy chain with parallel increase in the expression of C/EBP-${\alpha}$ and PPAR-${\gamma}$ and acquisition of adipocyte morphology, thus abolishing the formation of multinucleated myotubes. TZDs exert their adipogenic effects only in non-terminally differentiated myoblasts; myotubes were insensitive to the compound. Continuous exposure (at least 4-5 doses) to inducers after the growth arrest was essential to provide a sustained environment to the cells converting to fully matured adipoctyes. The results indicate that TZDs specifically converted the differentiation pathway of myoblasts into that of adipoblasts.

• 한국전기전자재료학회:학술대회논문집
• /
• 한국전기전자재료학회 2009년도 추계학술대회 논문집
• /
• pp.51-51
• /
• 2009

In this paper, we proposed GaN trench Static Induction Transistor(SIT). Because The compound semiconductor had superior thermal characteristics, GaN and SiC power devices is next generation power semiconductor devices. We carried out modeling of GaN SIT with 2-D device and process simulator. As a result of modeling, we obtained 340V breakdown voltage. The channel thickness was 3um and the channel doping concentration is 1e17cm-3. And we carried out thermal characteristics, too.

• 한국전기전자재료학회논문지
• /
• 제22권12호
• /
• pp.1018-1022
• /
• 2009

In this paper, we proposed GaN trench Static Induction Transistor(SIT). Because The compound semiconductor had superior thermal characteristics, GaN and SiC power devices is next generation power semiconductor devices. We carried out modeling of GaN SIT with 2-D device and process simulator. As a result of modeling, we obtained 340 V breakdown voltage. The channel thickness was 3 urn and the channel doping concentration is $1e17\;cm^{-3}$. And we carried out thermal characteristics, too.