• Tuberculosis and Respiratory Diseases
• /
• v.45 no.3
• /
• pp.574-582
• /
• 1998

Background: Bronchofiberscopy is a procedure with a chance of airway irritation and it may cause pathophysiologic changes of respiratory system. So we tried to evaluate the influence of bronchofibercopy on $O_2$ saturation, ABGA and PIT by patient's basal status and procedure type. Method: $O_2$ saturation was measured every 1 minute from the left index finger tip with percutaneous oximetry. ABGA was done before and right after the bronchofiberscopy and PIT was done before and within 10 minutes after the bronchofiberscopy. Results: The mean time for bronchofiberscopy procedure was 14.5mim and $SaO_2$ maximally fall to 89.0 below 8% of the baseline after mean time of 8.4min, which was recovered at the end of the procedure. $SaO_2$ change amount was 8.4 % on Non-$O_2$ supply group, which was lower compared to 6.4 % of the $O_2$-supply group without statistically significance. Biopsy Group and BAL group showed more $SaO_2$ fall than washing only group. The level of $PaO_2$ and FEV1 of the patient didn't influence significantly on $SaO_2$ fall during the procedure. ABGA taken before and after the bronchofiberscopy showed mild fall of $PaO_2$ and mild rise of $PaCO_2$. Whereas PFT showed decrease of FEV1(P<0.05) and increase of RV without changes in airway resistance and pulmonary diffusion capacity. Comparing before and after the bronchofiberscopy, the washing group showed no significant changes on PIT, while the biopsy group and the BAL group showed increase of RV & decrease of $FEV_1$ after the bronchofiberscopy. BAL group showed more changing tendency rather than biopsy group although not statistically significant. Conclusion: Bronchofiberscopy is considered as a relatively safe procedure, but it would be better to be done with $O_2$ supply especially in the patient with low $PaO_2$ and in the case of biopsy and BAL.

• Proceedings of the Korean Institute of Information and Commucation Sciences Conference
• /
• 2006.05a
• /
• pp.906-909
• /
• 2006

This paper proposes a new body-effect compensated switch configuration for low voltage and low distortion switched-capacitor (SC) applications. The proposed circuit allows rail-to-rail switching operation for low voltage SC circuits and has better total harmonic distortion than the conventional bootstrapped circuit by 19 dB. A 2-1 cascaded sigma-delta modulator is provided for performing the high-resolution analog-to-digital conversion on audio codec in a communication transceiver. An experimental prototype for a single-stage folded-cascode operational amplifier (opamp) and a 2-1 cascaded sigma-delta modulator has been implemented in a 0.25 micron double-poly, triple-metal standard CMOS process with 2.7 V of supply voltage.

• Korean Journal of Medicinal Crop Science
• /
• v.26 no.2
• /
• pp.181-187
• /
• 2018

Background: This study aimed to investigate out the influence of drought stress on the physiological responses of Dendropanax morbifera seedlings. Methods and Results: Drought stress was induced by discontinuing water supply for 30 days. Under drought stress, photosynthetic activity was significantly reduced with decreasing soil water content (SWC), as revealed by the parameters such as Fv/Fm, maximum photosynthetic rate ($P_{N\;max}$), stomatal conductance ($g_s$), stomatal transpiration rate (E), and intercellular $CO_2$ concentration (Ci). However, water use efficiency (WUE) was increased by 2.5 times because of the decrease in $g_s$ to reduce transpiration. Particularly, E and $g_s$ were remarkably decreased when water was withheld for 21 days at 6.2% of SWC. Dendropanax morbifera leaves showed osmotic adjustment of -0.30 MPa at full turgor and -0.13 MPa at zero turgor. In contrast, the maximum bulk modulus of elasticity ($E_{max}$) did not change significantly. Thus, Dendropanax morbifera seedlings could tolerate drought stress via osmotic adjustment. Conclusions: Drought avoidance mechanisms of D. morbifera involve reduction in water loss from plants, through the control of stomatal transpiration, and reduction in cellular osmotic potential. Notably photosynthetic activity was remarkably reduced, to approximately 6% of the SWC.

• Journal of Urban Science
• /
• v.9 no.2
• /
• pp.45-50
• /
• 2020

The formation characteristics of calcium carbonates are closely related to the durability and mechanical properties of cement-based materials. In this regard, a deep understanding of the reaction pathway of calcium carbonates is critical. Recently, non-classical nucleation theory was summarized and it was presumed that prenucleation clusters are present. The formation of the prenucleation cluster at undersaturated condition (≈ 0.1 ml) in the present study was investigated via electrical characteristics of an electrolytic solution. Calcium chloride dihydrate (CaCl2·2H2O) and sodium carbonate (Na2CO3) were used as starting materials to supply calcium and carbonate sources, respectively. Furthermore, the reaction pathway of calcium carbonates was investigated by time-resolved polarization and depolarization characteristics of the electrolytic solution. The time-resolved polarization and depolarization tests were conducted by switching polarity with an interval of 20 seconds for 1 hr and by measuring the variation of electrical resistance. It can be inferred from the results obtained in the present study that the reactive constituent for the formation of calcium carbonates was mostly consumed in the period possibly associated with the prenucleation and the reaction pathways may be governed by the monomer-addition mechanism.

• 한국신재생에너지학회:학술대회논문집
• /
• 2010.11a
• /
• pp.134-134
• /
• 2010

Recently, the interest of the study about IGCC(Integrated Gasification Combined Cycle), one of New & Renewable Energy technologies, bas been increased due to the United Nations Framework Convention on Climate Change, the Low Carbon Green Growth policy, etc. Also, with this interest of IGCC, the study on the gas turbine utilizing the synthetic gas is performing actively. In the study of the gas turbine characteristic, the power performance and the combustion efficiency are mainly discussed and also the concern about the exhaust gas is being taken care of due to the increasing awareness of the environment. With this, we would like to go over the exhaust gas emission characteristic by the synthetic gas inflow in this test. In order to conduct such a test, we constructed a synthetic gas supplying system to supply the synthetic gases ($H_2$: hydrogen, $N_2$: nitrogen, CO: carbon monoxide, $CO_2$: carbon dioxide, and $H_2O$: steam) quantitatively and this combustion test was conducted by controlling the supplied synthetic gases artificially. The concentration of the exhaust gases appeared variously depending on the differences of the inflow nitrogen amount and the steam amount, whether or not the carbon dioxide flow in and so on. The results of the test can be able to be utilized for the IGCC study by understanding the exhaust gas emission characteristic of the coal gas turbine by synthetic gas composition.

• Publications of The Korean Astronomical Society
• /
• v.32 no.1
• /
• pp.77-81
• /
• 2017

A wide spectral coverage from near-infrared (NIR) to far-infrared (FIR) of AKARI both for imaging and spectroscopy enables us to efficiently study the emission from gas and dust in the interstellar medium (ISM). In particular, the Infrared Camera (IRC) onboard AKARI offers a unique opportunity to carry out sensitive spectroscopy in the NIR ($2-5{\mu}m$) for the first time from a spaceborn telescope. This spectral range contains a number of important dust bands and gas lines, such as the aromatic and aliphatic emission bands at 3.3 and $3.4-3.5{\mu}m$, $H_2O$ and $CO_2$ ices at 3.0 and $4.3{\mu}m$, CO, $H_2$, and H I gas emission lines. In this paper we concentrate on the aromatic and aliphatic emission and ice absorption features. The balance between dust supply and destruction suggests significant dust processing taking place as well as dust formation in the ISM. Detailed analysis of the aromatic and aliphatic bands of AKARI observations for a number of H ii regions and H ii region-like objects suggests processing of carbonaceous dust in the ISM. The ice formation process can also be studied with IRC NIR spectroscopy efficiently. In this review, dust processing in the ISM divulged by recent analysis of AKARI data is discussed.

• Journal of Soil and Groundwater Environment
• /
• v.11 no.4
• /
• pp.10-17
• /
• 2006

Laboratory-scale two-dimensional aquifer physical model studies were conducted to assess the effect of air injection rate and air injection pattern on the removal of disel contaminated soil and groundwater by air/bio-sparging. The experimental results were represented that the optimal conditions in this experiment were as air injection rate of 1,000 ml/min and pulsed air injection pattern(15 min on/off). The results of the TPH reduction, DO consumption and $CO_2$ production indicate the effective biodegradation evidence of diesel. Based on our results, The minimal $O_2$ supply and pulsed air injection pattern could effectively enhance the diesel removal and the pulsing air injection had effect on oxygenation in this system. Thus, the cost of operating air/bio-sparging system will be reduced if optimal air injection rate and pulsed air injection pattern are applied to remediate contaminants.

• KSBB Journal
• /
• v.29 no.4
• /
• pp.244-249
• /
• 2014

Biosynthesis pathway of medium-chain-length (MCL) polyhydroxyalkanoates (PHA) from fatty acid ${\beta}$-oxidation pathway was constructed in recombinant Escherichia coli by introducing the Pseudomonas sp. 61-3 PHA synthase gene (phaC2) and the maoC genes from Pseudomonas putida, Sinorhizobium meliloti, and Ralstonia eutropha. The metabolic link between fatty acid ${\beta}$-oxidation pathway and PHA biosynthesis pathway was constructed by MaoC, which is homologous to P. aeruginosa (R)-specific enoyl-CoA hydratase (PhaJ1). When the E. coli W3110 strains expressing the phaC2 gene and one of the maoC genes from P. putida, Sinorhizobium meliloti, and Ralstonia eutropha were cultured in LB medium containing 2 g/L of sodium decanoate as a carbon source, MCL-PHA that mainly consists of 3-hydroxyhexanoate (3HHx), 3-hydroxyoctanoate (3HO) and 3-hydroxydecanoate (3HD), was produced. The monomer composition of PHA and PHA contents varied depending on MaoC employed for the production of PHA. The highest PHA content of 18.7 wt% was achieved in recombinant E. coli W3110 expressing the phaC2 gene and the P. putida maoC gene. These results suggest that MCL-PHA biosynthesis pathway can be constructed in recombinant E. coli strains from the b-oxidation pathway by employing MaoC able to supply (R)-3-hydroxyacyl-CoA, the substrate of PHA synthase.

• International Commerce and Information Review
• /
• v.14 no.2
• /
• pp.147-172
• /
• 2012

The aim of this research is to identify the competencies required by freight forwarding company logistics managers or supply chain managers. And this research also attempts to show their relative importance and key knowledge areas that require improvement. Using a survey questionnaire, data was collected against forty three logistics and supply chain management skills or competencies, which were then grouped into four categories and analysed. The Analysis revealed that supply chain awareness, ability to make decisions, analytical skill, communication skill, supply chain cost, people skill, and integration of internal or external information flow which belong to logistics planning group are considered the most important competencies for effective and efficient logistics functioning. On the other hand, reverse logistics and IATA regulations from environmental awareness group show little influence on logistics managers for improving their logistics performances. The results have implications for a variety of parties including prospective logisticians, students, teachers and companies considering expanding their business to Chinese market. For example, the results permit companies to employ appropriate logistics managers who are qualified with sufficient skills and competencies suggested in this research. In the case of practitioners, the results provide a benchmark for comparison with their current level of abilities and suggested competencies.

• Journal of Korean Society for Atmospheric Environment
• /
• v.34 no.1
• /
• pp.76-86
• /
• 2018

Using the CAPSS emissions data, we analysed changes and reasons in the annual air pollutant emission trends from 1999 to 2014. The CO emissions in the metropolitan area decreased steadily since 2001, when the latest model year of automobiles and high efficiency fuel were applied. However, other regions have not changed significantly in annual emissions. $NO_x$ emissions continued to increase since 2003, and unchanged after the decline in 2007. $SO_x$ emissions are steadily declining due to the supply of low sulfur oil. The $PM_{10}$ and $PM_{2.5}$ emissions were repeatedly affected by the influence of motor vehicles activities in the metropolitan area. In Gangwon and Chungcheong Provinces, emissions are increasing according to the use of coal in the manufacturing sector. And VOC and $NH_3$ emissions are increasing steadily every year. The major CO emission sources was automobiles in the metropolitan area. However, agricultural residue burning was the biggest CO sources in the Chungchong, Honam and Yeongnam Provinces. The major sources of $NO_x$ emissions differ from region to region. In the Metropolitan area, Honam and Yeongnam region, the truck was the largest emitter of $NO_x$. However, the cement kiln was the largest producer of $NO_x$ in Gangwon region, and the power plant is the largest emitter in Chungcheong Provinces.