• 멤브레인
• /
• 제28권6호
• /
• pp.424-431
• /
• 2018

Cobalt tetraphenylporphyrin-benzylimidazole (CoTpp-BIm)을 산소 운반체로 이용하여 polyethersulfone (PES)와의 혼합물을 기반으로 하는 혼합 구조의 평판형 분리막의 기체 분리 성능을 조사하였다. CoTpp-BIm이 혼합된 PES막은 손가락 구조와 스폰지형 구조가 혼합된 비대칭 구조를 가졌고, 상부표면은 치밀한 형태를 보였다. 기체분리 성능 실험은 94%의 $N_2$ 기체에 6%의 $O_2$가 혼합된 기체를 사용하여 평가하였다. 산소 및 질소 투과율은 ${\Delta}P$가 15~228 cmHg 범위에서 실험하였고, PES막의 투과면은 진공수준으로 유지되었다. CoTpp-BIm이 혼합된 PES막의 산소 투과율은 공급 압력이 감소함에 따라 증가하였다. 공급 압력이 15 cmHg일 때 산소 투과율($P_{O_2}$)는 6676 Barrer이었고, $O_2/N_2$ 선택도(${\alpha}$)는 6.1, 촉진인자(F)는 2.39까지 증가하였다. 이를 바탕으로 PES막에 CoTpp-BIm을 첨가하면 산소분리 특성이 향상되는 것을 확인하였다.

• 유기물자원화
• /
• 제23권2호
• /
• pp.67-72
• /
• 2015

본 연구는 음식폐기물 건조사료를 곤충의 먹이(사료)로 공급하여 대량 증식을 위한 특성을 연구하였다. 특히 아메리카동애등에(Hermetia illucens)의 경우 음식폐기물 건조사료 함량에 따른 유충 증식량을 평가한 결과, 발육 초기에는 호프박과 일반사료를 음식폐기물 건조사료와 함께 혼합하여 공급한 경우 증체량이 증가하였으나, 발육이 서서히 진행되면서 종령시기에는 음식폐기물 건조사료 100%와 혼합사료간 유충의 중량에 큰 차이가 없었다. 집파리 유충은 음식폐기물 건조사료를 먹이로 100% 공급할 경우 발육이 부진하여 비정상적으로 용화되었으며, 정상적인 사육을 위해서는 음식폐기물 건조사료 함량을 20~30%로 낮게 공급하는 것이 효율적이다. 아메리카왕거저리의 유충은 사료의 종류에 크게 영향을 받지 않고 발육하는 것으로 나타났으며, 음식폐기물 건조사료에서 사망하는 개체가 조사되지 않아 먹이(사료)로 공급해도 생육을 저해하지 않았다.

• 대한전자공학회논문지SD
• /
• 제44권3호
• /
• pp.59-64
• /
• 2007

본 논문은 FPD(Flat panel Display)용 TCON(Timing Controller) 칩의 PLL에 관한 것이다. TCON 동작 시 발생하는 전원전압 변화에 대해 일정한 주파수를 출력하도록 하는 V-I 변환기를 설계하였다 새로운 V-I 변환기는 VCO's(전압 제어 발진기)의 출력 주파수를 결정짓는 전원 전압의 변화를 그에 상응하는 전류로 보상하여 전원 전압에 둔감하게 하였다. 설계된 회로는 TSMC 0.25um 1-poly 3-metal CMOS 공정으로 구현하였으며 2.5V 공급 선원에서 $192\sim360MHz$로 동작하도록 설계 하였다. 측정 결과 $192\sim360MHz$내에서 100ps 근처의 RMS 지터을 나타내었다.

• 동의생리병리학회지
• /
• 제34권2호
• /
• pp.75-80
• /
• 2020

In this study, we investigated the dose-dependent effects of mixtures of Atractylodes macrocephala (AM) and Amomum villosum (AV) water extracts in a ratio of 3:1 on high fat diet (HFD)-induced obesity model. Oral administration of various concentrations with mixtures of AM and AV extracts in a ratio of 3:1 for 6 weeks inhibited HFD-induced increases of body, liver and epididymal fat weights in a dose-dependent fashions. Those effects may be mediated by decreased expressions of lipogenesis-related genes such as acetyl coA carboxylase (ACC) and fatty acid synthase (FAS) in liver. Also, increase of insulin and decrease of adiponectin in serum by HFD supply were inhibited by three different dosages of mixtures of AM and AV extracts in a ratio of 3:1. HFD supply induced increases of serum total cholesterol, triglyceride and LDL cholesterol. However, hyperlipidemia was significantly decreased in dose-dependent manners by treatment with mixtures of AM and AV extracts. Based on the results of the present study, hypolipidemic and anti-obesity effects by mixtures of AM and AV extracts were found in HFD-induced obesity model. Further clinical investigation is needed to develop anti-obesity therapeutic or preventive agents by using mixtures of AM and AV extracts.

• Journal of Mechanical Science and Technology
• /
• 제19권4호
• /
• pp.1001-1005
• /
• 2005

This paper evaluates the performance of ventilation for the removal of indoor pollutants as a function of ventilation rate and the number of occupants in a test room and school classroom. An experimental apparatus consists of a test room, a tracer gas supply system, a gas detector, and a fan for ventilation air supply with a controller. The ventilation performance is evaluated in a step-down method based on ASTM Standard E741-83 using $CO_{2}$ gas as a tracer gas in the test room of 35 $m^{3}.$ For the ventilation air flow rate of 1.0 ACH, a recommended ventilation flow rate of Korea school standard for acceptable indoor air quality in the case of one person, CO_{2}$ gas concentration decreases up to $55{\%}$ within 50 minutes without occupancy and increases up to $75{\%}$ in the case of one occupant. Also indoor air quality at the school classroom is investigated experimentally.

• 한국수소및신에너지학회논문집
• /
• 제24권2호
• /
• pp.128-135
• /
• 2013

The nuclear fuel cycle plant is composed of various subsystems such as a fuel storage and delivery system (SDS), a tokamak exhaust processing system, a hydrogen isotope separation system, and a tritium plant analytical system. Korea is sharing in the construction of the International Thermonuclear Experimental Reactor (ITER) fuel cycle plant with the EU, Japan, and the US, and is responsible for the development and supply of the SDS. Hydrogen isotopes are the main fuel for nuclear fusion reactors. Metal hydrides offer a safe and convenient method for hydrogen isotope storage. The storage of hydrogen isotopes is carried out by absorption and desorption in a metal hydride bed. These reactions require heat removal and supply respectively. Accordingly, the rapid storage and delivery of hydrogen isotopes are enabled by a rapid cooling and heating of the metal hydride bed. In this study, we designed and manufactured a vertical-type hydrogen isotope storage bed, which is used to enhance the cooling performance. We present the experimental details of the cooling performances of the bed using various cooling parameters. We also present the modeling results to estimate the heat transport phenomena. We compared the cooling performance of the bed by testing different cooling modes, such as an isolation mode, a natural convection mode, and an outer jacket helium circulation mode. We found that helium circulation mode is the most effective which was confirmed in our model calculations. Thus we can expect a more efficient bed design by employing a forced helium circulation method for new beds.

• 한국유체기계학회 논문집
• /
• 제20권2호
• /
• pp.53-62
• /
• 2017

In this paper, the effect of oil conditions in rotor dynamic behaviors of a FFRB (Fully-Floating Ring Bearing) is investigated. Through the characteristic of a FFRB has two films, it has several advantages such as less friction loss and better stability over a wide speed range. However, it is difficult to supply a oil to the inner film. Thus, turbocharger makers have been paid significant attention to the lubrication of a FFRB because of its importance. This work focuses on the influence of oil inlet pressure and temperature. The methodologies of computational simulation and experimental test were used to estimate the rotor dynamic behaviors. In experimental test, the single-scroll turbocharger for the 1.4L diesel engine was used. The results show that the oil inlet pressure and temperature will place considerable influence on the rotor response. Oil conditions affect RSR (Ring Speed Ratio) which is cause of sub-synchronous vibrations, which also cause of oil whirling and whip even a critical speed. At higher speed range, the phenomenon of self-excited vibrations which is cause of instability of fluid whirl is investigated through the orbit shapes that consist of small orbit and large amplitude orbit. It is shown that some performance of a FFRB can be controlled by the conditions of oil supply. Finally, it was revealed that the oil induced operating conditions will strongly affect the turbocharger rotor dynamics behaviors.

• 한국조명전기설비학회:학술대회논문집
• /
• 한국조명전기설비학회 2008년도 추계학술대회 논문집
• /
• pp.349-354
• /
• 2008

2008년 8월 우리나라는 온실효과로 인한 기후변화 대응 역량을 강화하고, 에너지의 안정적 공급과 효율화 체계를 구축하기 위한 방안으로 '제1차 국가에너지기본계획'을 발표하였다. 이에 따르면 우리나라는 세계 10위의 에너지다소비 국가이자, 그 중 97% 이상을 해외 수입에 의존하는 나라로서 신재생에너지설비의 중요성이 크게 부각되고 있다. 본 논문은 일반적인 건물의 난방설비로 이용되고 있는 가스와 유류설비를 지열히트펌프로 대체함으로서, 전력계통의 부하율을 향상시키는 방안을 제시하였으며, 이에 따른 에너지비용 절감과 온실가스의 감축방안을 정량적으로 제시하였다.

• 농업과학연구
• /
• 제47권4호
• /
• pp.1057-1069
• /
• 2020

For most upland crops in Korea, underground water is used to ensure an adequate water supply. Thus, surface water storage tanks are needed to supply surface water from reservoirs or streams. This study discusses the design, manufacture and monitoring of a water storage tank capable of reliably supplying water to crops and preventing the inflow of floating debris. The study was conducted in an apple orchard in Yesan-gun, Chungcheongnam-do in Korea. Based on the water requirements of the crops and size of the orchard, a required flow volume of about 0.6 ㎥·h-1 was determined, along with a surface water storage tank capacity of 1.2 ㎥. Following a comparison with other materials, stainless steel (STS) was used to construct the water tank. The tank was designed to provide 14 hours of irrigation, enabling a small-capacity, cost-efficient tank design to be used. A surface water irrigation test was performed using the surface water storage tank. The average surface water irrigation flow rate was 0.00045 ㎥·m-2·h-1. The water quality test showed that the pH, suspended solids (SS), total nitrogen (TN), and total phosphorus (TP) values satisfied the reference values for agricultural water. The test results showed that the surface water storage tank evaluated in this study allows for crop irrigation when there is a lack of groundwater during droughts.

• 대한환경공학회지
• /
• 제31권6호
• /
• pp.460-466
• /
• 2009

간이상수도 시스템에서 공급하는 식수는 일정한 잔류 약품(염소)량을 유지해야 하기 때문에 물과 약품의 혼합방법은 매우 중요하다. 본 연구에서는 물과 약품의 혼합방법을 최적화하기 위하여, 4가지 모델에 대한 농도분포 및 혼합지수를 구하였다. 그중 2가지 모델에 대해서는 혼합효과가 높게 나타났다. 하나는 지하수 공급 파이프 중앙에 약품을 공급하는 모델이고, 또 다른 하나는 약품공급 파이프 하류에 반원형태의 블록을 설치한 모델이다. 이러한 모델들은 유동의 확산 및 교란을 야기시켜 혼합효과를 증가시키는 결과를 가져왔다. 이와 같은 수치해석 결과는 최적의 혼합효과를 얻기 위한 시스템을 설계하는데 도움이 될 것으로 기대된다.