• 한국신재생에너지학회:학술대회논문집
• /
• 한국신재생에너지학회 2009년도 춘계학술대회 논문집
• /
• pp.727-730
• /
• 2009

Highly active and stable nano-sized Ni catalysts supported on MgO-$Al_2O_3$ calcined from hydrotalcite-like materials have been successfully developed with a strong metal to support interaction (SMSI) to enhance the coke resistance in combined $H_2O$ and $CO_2$ reforming of $CH_4$ (CSCRM) for syngas ($H_2$/CO=2) production. The change of the surface area and NiO crystallite size with varying the pre-calcination temperature of support and Mgo content was investigated in relation to the coke resistance. As increasing the pre-calcination temperature, the surface area decreases and the metal to support interaction becomes weak. As a consequence, the coke deposition was more severe on catalysts pre-calcined at high temperature. It was concluded that highly dispersed Ni metal in the surface of Ni/MgO-$Al_2O_3$ catalyst (MgO=30 wt%) pre-calcined at $800^{\circ}C$ had a strong metal to support interaction (SMSI) resulting in an increase of coke resistance and high activity.

• 공업화학
• /
• 제23권2호
• /
• pp.176-182
• /
• 2012

메탄 개질반응($CH_4$ reforming)은 온실가스($CH_4$와 $CO_2$)를 합성가스(CO, $H_2$)로 전환시켜 온실가스를 자원화 한다는 점에서 활발하게 연구가 진행되고 있다. 그러나 촉매 비활성화와 고온 반응으로 인해 아직 상업화된 공정이 없는 상황이다. 본 연구에서는 Co, Ru, Zr 금속과 담지체로 $SiO_2$를 이용해 Co-Ru-Zr-Si (CRZS)촉매를 제조하고 이를 성형하여 메탄개질반응 특성을 연구하고, 공정 개발을 위한 기초 자료를 얻고자 하였다. 성형촉매의 특성을 알아보기 위해 XRD, BET 그리고 EDS로 분석하였고, 메탄 및 이산화탄소 전환율은 GC (TCD detector)로 분석하였다. 또한 반응속도론적 연구로 부터 반응속도상수를 구하였으며 반응물의 물질전달영향을 받지 않는 촉매크기를 선정하였다. 선정된 성형촉매는 $850^{\circ}C$, 720 h에서도 활성을 유지하였다.

• Bulletin of the Korean Chemical Society
• /
• 제26권12호
• /
• pp.2017-2020
• /
• 2005

The supported bimetallic Co-containing catalysts promoted by the different amount of noble metal (Pd) have been studied in the dry reforming of methane. The activity, selectivity, stability and resistance to the carbon deposition of Co-Pd/$Al_2O_3$ catalysts depend on both the catalyst composition and process conditions. It has been observed that the Co-Pd/$Al_2O_3$ catalysts produce the various oxygenates from $CO_2$ + $CH_4$ at moderate pressures.

• Korean Chemical Engineering Research
• /
• 제56권2호
• /
• pp.176-185
• /
• 2018

지구 온난화가 가속화됨에 따라 온실가스 감축이 보다 중요해졌다. 이산화탄소 건식 개질은 온실가스인 $CO_2$와 $CH_4$를 활용하여 부가가치가 높은 물질인 CO와 $H_2$를 얻을 수 있는 유망한 온실가스 감축 기술이다. 그러나 이 반응이 일어나는 반응기의 운전 중에 심각한 코킹 문제가 발생할 수 있다. 이산화탄소 개질반응은 매우 강한 흡열반응이기 때문에 반응기 입구 근처에서 반응 온도가 많이 떨어지면서 코크 생성을 야기시킨다. 이러한 문제를 해결하기 위해서는 코크 생성이 잘 일어나지 않는 온도영역에서 반응이 일어나도록 하는 것이 중요하다. 본 연구에서는 새로운 촉매 배열 방법을 이용하여 반응기 전 구간이 코크 생성이 잘 일어나지 않는 온도 영역 내에서 유지되도록 하는 설계 방법을 제안하였다. 이 설계 방법은 연료 유량, 촉매 밀도, 구간 별 출구 온도를 최적화 변수로 하여 주어진 전환율에 대하여 반응기 길이를 최소화 할 수 있는 최적화 문제를 풀도록 하여 반응기를 최적화한다.

• 한국신재생에너지학회:학술대회논문집
• /
• 한국신재생에너지학회 2009년도 추계학술대회 논문집
• /
• pp.218-221
• /
• 2009

Solid oxide fuel cells (SOFCs), as high-temperature fuel cells, have various advantages. In some merits of SOFCs, high temperature operation can lead to the capability for internal reforming, providing fuel flexibility. SOFCs can directly use CH4 and CO as fuels with sufficient steam feeds. However, hydrocarbons heavier than CH4, such as ethylene, ethane, and propane, induce carbon deposition on the Ni-based anodes of SOFCs. In the case of the ethylene steam reforming reaction on a Ni-based catalyst, the rate of carbon deposition is faster than among other hydrocarbons, even aromatics. In the reformates of heavy hydrocarbons (diesel, gasoline, kerosene and JP-8), the concentration of ethylene is usually higher than other low hydrocarbons such as methane, propane and butane. It is importatnt that ethylene in the reformate is removed for stlable operation of SOFCs. A new methodology, termed post-reforming was introduced for removing low hydrocarbons from the reformate gas stream. In this work, activity tests of some post-reforming catalysts, such as CGO-Ru, CGO-Ni, and CGO-Pt, are investigated. CGO-Pt catalyst is not good for removing ethylene due to low conversion of ethylene and low selectivity of ethylene dehydrogenation. The other hand, CGO-Ru and CGO-Ni catalysts show good ethylene conversion, and CGO-Ni catalyst shows the best reaction selectivity of ethylene dehydrogenation.

• 공업화학
• /
• 제9권7호
• /
• pp.1070-1078
• /
• 1998

농축상을 포함한 다원 반응계의 Gibbs Free Energy 최소화 계산을 수행하여 이산화탄소 개질반응에 대한 열역학적 분석을 수행하였으며, $Al_2O_3$, $La_2O_3$, ZSM-5, MCM-41, 그리고 KIT-1의 담체에 담지된 니켈 촉매와 상업용 개질 촉매 ICI 46-1상에서 이산화탄소에 의한 메탄의 개질 반응 실험을 수행하였다. 메탄의 이산화탄소에 의한 개질반응 열역학 계산은 $CH_4$, $CO_2$, CO, $H_2$, $H_2O$, C계에서 수행하는 것이 바람직하였고, 수증기나 산소의 첨가 효과는 이산화탄소의 개질 반응 기여도를 감소시키는 것으로 예상되었다. Ni/ZSM-5, Ni/MCM-41, Ni/KIT-1등 실리케이트 계열의 분자체 담체에 니켈을 담지시킨 촉매가 메탄과 이산화탄소의 전화율이 우수하며, 일산화탄소 수율도 높은 것을 알 수 있었다. 이산화탄소 개질 반응에 대한 코크의 침적은 칼슘 산화물을 첨가함으로써 감소되었으며, 10% Ni과 3% Ca를 담지시킨 Ni/Ca/KIT-1 촉매가 20시간 동안 $650^{\circ}C$ 이상에서 평형 전화율에 근접한 이산화탄소와 메탄의 전화율을 나타냄이 확인되었다. 또한 상대적으로 높은 공간 속도에도 우수한 활성을 나타내었다.

• 한국응용과학기술학회지
• /
• 제28권3호
• /
• pp.321-328
• /
• 2011

The autothermal reforming reaction of methane was investigated to produce hyd rogen with Ni/$CeO_2-ZrO_2$, Ni/$Al_2O_3$-MgO and Ni-Ru/$Al_2O_3$-MgO catalysts. Honeycomb metalli c monolith was applied in order to obtain high catalytic activity and stability in autothermal r eforming. The catalysts were characterized by XRD, BET and SEM. The influence of various catalysts on hydrogen production was studied for the feed ratio($O_2/CH_4$, $H_2O/CH_4$). The $O_2/CH_4$ and $H_2O/CH_4$ ratio governed the methane conversion and temperature profile of reactor. Th e reactor temperature increased as the reaction shifted from endothermic to exothermic reactio n with increasing $O_2/CH_4$ ratio. Among the catalysts used in the experiment, the Ni-Ru/$Al_2O_3$-MgO catalyst showed the highest activity. The 60% of $CH_4$ conversion was obtained, and th e reactor temperature was maintained $600^{\circ}C$ at the condition of GHSV=$10000h^{-1}$ and feed ratio S/C/O=0.5/1/0.5.

• 공업화학
• /
• 제20권4호
• /
• pp.423-429
• /
• 2009

본 연구의 목적은 바이오가스를 이용하여 고농도 수소 생산과 CO 제거가 가능한 글라이딩아크 플라즈마 개질 시스템의 개발이다. 이를 위하여 수성가스 전이반응기는 수증기 주입량 변화,촉매층 온도 변화에 대하여, 선택적 산화반응기는 촉매층 온도변화, 공기주입량에 대하여 실험을 진행하였다. 기준조건은 S/C 비 3, 촉매층 온도 $700^{\circ}C$, 전체가스량 16 L/min, 입력전력 2.4 kW, 바이오가스 구성비($CH_4$ : $CO_2$ ) 6 : 4이다. 이때의 실험결과는 HTS의 최적조건은 S/C비 3, 반응온도 $500^{\circ}C$, LTS의 최적조건은 S/C 비 2.9, 반응온도 $300^{\circ}C$이다. 또한 PROX I단의 최적조건은 각각 공기유입량 300 mL/min, $190^{\circ}C$, PROX II단의 최적조건은 공기유입량 200 mL/min, $190^{\circ}C$을 나타내었다. 반응기를 모두 지난 후의 합성가스는 $H_2$ 수율 55%, $CH_4$ 전환율 97%, $CO_2$ 전환율 97%, CO 선택도는 0%로 바이오가스를 개질하여 생성된 합성가스는 높은 수율을 나타내며, CO 선택도는 0%를 나타내었다.

• Bulletin of the Korean Chemical Society
• /
• 제32권6호
• /
• pp.1912-1920
• /
• 2011

The $SnO_2$ with a particle size of about 300 nm instead of Ni is used in this study to overcome rapid catalytic deactivation by the formation of a $NiAl_2O_4$ spinal structure on the conventional Ni/${\gamma}$-$Al_2O_3$ catalyst and simultaneously impregnated the catalyst with potassium (K). The $SnO_2-K_2O$ impregnated Zeolite Y catalyst ($SnO_2-K_2O$/ZY) exhibited significantly higher ethanol reforming reactivity that that achieved with $SnO_2$ 100 and $SnO_2$ 30 wt %/ZY catalysts. The main products from ethanol steam reforming (ESR) over the $SnO_2$-$K_2O$/ZY catalyst were $H_2$, $CO_2$, and $CH_4$, with no evidence of any CO molecule formation. The $H_2$ production and ethanol conversion were maximized at 89% and 100%, respectively, over $SnO_2$ 30 wt %-$K_2O$ 3.0 wt %/ZY at 600 $^{\circ}C$ for 1 h at a $CH_3CH_2OH:H_2O$ ratio of 1:1 and a gas hourly space velocity (GHSV) of 12,700 $h^{-1}$. No catalytic deactivation occurred for up to 73 h. This result is attributable to the easier and weaker of reduction of Sn components and acidities over $SnO_2-K_2O$/ZY catalyst, respectively, than those of Ni/${\gamma}$-$Al_2O_3$ catalysts.

• 한국신재생에너지학회:학술대회논문집
• /
• 한국신재생에너지학회 2007년도 추계학술대회 논문집
• /
• pp.184-187
• /
• 2007

Hydrogen could be produced from any substance containing hydrogen atoms, such as water, hydrocarbon (HC) fuels, acids or bases. Hydrocarbon fuels couold be converted to hydrogen-rich gas through reforming process for hydrogen production. Even though fuel cell have high efficiency with pure hydrogen from gas tank, it is more beneficial to generate hydrogen from city gas (mainly methane) in residential application such as domestic or office environments. Thus hydrogen is generated by reforming process using hydrocarbon. Unfortunately, the reforming process for hydrogen production is accompanied with unavoidable impurities. Impurities such as CO, $CO_2$, $H_2S$, $NH_3$, and $CH_4$ in hydrogen could cause negative effects on fuel cell performance. Those effects are kinetic losses due to poisoning of electrode catalysts, ohmic losses due to proton conductivity reduction including membrane and catalyst ionomer layers, and mass transport losses due to degrading catalyst layer structure and hydrophobic property. Hydrogen produced from reformer eventually contains around 73% of $H_2$, 20% or less of $CO_2$, 5.8% of less of $N_2$, or 2% less of $CH_4$, and 10ppm or less of CO. Most impurities are removed using pressure swing adsorption (PSA) process to get high purity hydrogen. However, high purity hydrogen production requires high operation cost of reforming process. The effect of carbon dioxide on fuel cell performance was investigated in this experiment. The performance of PEM fuel cell was investigated using current vs. potential experiment, long run (10 hr) test, and electrochemical impedance measurement when the concentrations of carbon dioxide were 10%, 20% and 30%. Also, the concentration of impurity supplied to the fuel cell was verified by gas chromatography (GC).