• 한국조명전기설비학회:학술대회논문집
• /
• 한국조명전기설비학회 2007년도 추계학술대회 논문집
• /
• pp.341-344
• /
• 2007

교토의정서(Kyoto Protocol)는 1997년 일본 교토에서 채택되어 2005년 2월에 공식 발효되었다. 우리나라는 현재 온실가스 감축의무 부담이 없지만 2013년부터 감축의무가 거의 확실시되고 있는 상황이다 국내 온실가스 배출량의 25%를 차지하는 발전산업은 화석연료를 사용하고 있어 전력생산에 따른 $CO_2$ 배출량의 계산은 매우 중요한 일이 되었다. 본 논문은 - D발전소의 성능시험에 대하여 기술하고, - 성능시험 결과 얻어진 D발전소 성능시험 Data a, b, c 특성계수를 이용, LNG와 중유 연소시 각각 연료소모량에 대한 $CO_2$ 대기 배출량을 계산 비교하였으며, - 화학적인 방법에 의한 $CO_2$ 대기 배출량 산정방법을 간략히 언급하였다.

• 전기학회논문지
• /
• 제59권7호
• /
• pp.1232-1236
• /
• 2010

In this Paper, optimal capacity of energy storage and amount of $CO_2$ reduction in Jeju is calculated. Based on electricity demand data of Je-Ju from 2006 to 2007, the estimation electricity demand from 2009 to 2018 is performed. To calculate the amount of maximum $CO_2$ reduction and energy storage capacity in Jeju, the 4th power supply planning and IPCC guideline are used. Finally, Optimal capacity of energy storage and the amount of $CO_2$ reduction are showed.

• 한국농공학회논문집
• /
• 제64권6호
• /
• pp.25-34
• /
• 2022

Recently, as a study to air cooled slag, which is an industrial by-product, research is being proceed to use it as a material for concrete. In this study, the workability, air content, compressive strength, CO₂ emission and economic feasibility of concrete were analyzed when air cooled slag, an industrial by-product, was applied as aggregate for rural road pavement concrete. As a result of the analysis, both the slump and air contents test results of concrete using the air cooled slag aggregate satisfied the target values, and the compressive strength was increased when the air cooled slag aggregate was used compared to when the natural aggregate was applied. On the other hand, the largest amount of CO₂ emission by raw material was found in aggregate. The carbon emission of rural road pavement concrete using air cooled slag aggregate increased when the Korean LCI DB was applied compared to when natural and crushed aggregates were applied, and the emission decreased when the German LCI DB was applied. This results are due to differences in the viewpoints of industrial by-products. However, considering the recycling of waste from the environmental aspect, it is necessary to simultaneously review the CO₂ emission and recycling aspects in the future. Also, the application of air cooled slag aggregate had the effect of improving the economic efficiency of rural road pavement concrete about 18.75%.

• Journal of the Korean Wood Science and Technology
• /
• 제46권2호
• /
• pp.202-210
• /
• 2018

This study was carried out to quantify degree of contribution of harvested wood product (HWP) on mitigation of climate change by valuation of public benefits, environmentally and economically. The potential carbon dioxide emission reduction of HWP was estimated by accounting carbon storage effect and substitution effect. Based on 2014 statistics of Korea Forest Service, domestic HWPs were sorted by two categories, such as wood products produced domestically from domestic and imported roundwood. The wood products were divided into seven items; sawnwood, plywood, particle board, fiberboard (MDF), paper (including pulp), biomass (wood pellet) and other products. The carbon stock of wood products and substitution effects during manufacturing process was evaluated by items. Based on the relevant carbon emission factor and life cycle analysis, the amount of carbon dioxide emission per unit volume on HWP was quantified. The amounts of carbon stock of HWP produced from domestic and from imported roundwood were 3.8 million $tCO_{2eq}$., and 2.6 million $tCO_{2eq}$., respectively. Also, each reduction of carbon emission by substitution effect of HWP produced from domestic and imported roundwood was 3.1 million $tCO_{2eq}$. and 2.1 million $tCO_{2eq}$., respectively. The results of this study, the amount of carbon emission reduction of HWP, can be effectively used as a basic data for promotion of wood utilization to revise and establish new wood utilization promotion policy such as 'forest carbon offset scheme', and 'carbon storage labeling system of HWP'.

• 한국대기환경학회지
• /
• 제29권6호
• /
• pp.713-721
• /
• 2013

This study is about emission characteristics of HAPs and particulate matters emitted by spray of paint and organic solvent usually used in vehicle paint facilities. To analyze emission characteristics of HAPs and particulate matters emitted from vehicle paint facilities are calculated based on the measuring emission quantity of pollutants based on the amount of paint used (kg) and unit area ($m^2$) by paint manufacturers (J company, K company, and R company). In cases of paint manufacturers (J, K, and R), average emission factors of VOCs, carbonyl compound, particulate matter, and PAHs per 1 kg of paint were 327.81 g/kg, 5.98 g/kg, 336.70 g/kg, and 0.0078 g/kg respectively. The average emission factors of VOCs, carbonyl compounds, particulate matters, and PAHs by unit area were $171.55g/m^2$, $3.10g/m^2$, $176.27g/m^2$, and $0.0036g/m^2$ respectively.

• 반도체디스플레이기술학회지
• /
• 제12권3호
• /
• pp.19-22
• /
• 2013

The purpose of this study is to develop a system that can monitor the amounts of energy consumption during CVD and etching process for semiconductor manufacturing. Specifically, this system is designed to measure the $CO_2$ emission amounts quantitatively by measuring the flow rate of gas used and amount of power consumed during the processes. The processes of CVD equipment can be classified generally into processing step and cleaning step and all the two steps were monitored. In CVD and etcher equipments, various gases including Ar and $O_2$ are used, but Ar, $O_2$ and He were monitored with the use of the LCI data of Korea Environmental Industry & Technology Institute and carbon emission coefficients of EcoInvent. As a result, it was found that the carbon emission amounts of CVD equipment for Ar, $O_2$ and He were $0.030kgCO_2/min$, $4.580{\times}10^{-3}kgCO_2/min$ and $6.817{\times}10^{-4}kgCO_2/min$, respectively and those of etcher equipment for Ar and $O_2$ are $5.111{\times}10^{-3}kgCO_2/min$ and $7.172kgCO_2/min$, respectively.

• 한국수산과학회지
• /
• 제43권1호
• /
• pp.78-82
• /
• 2010

Vessel numbers and fuel consumption by South Korea's offshore and coastal fisheries have continuously declined since 2000. Using the 2006 Intergovernmental Panel on Climate Change Guidelines, $CO_2$ emissions by South Korea's fishery industry (fishing and aquaculture, excluding deep-sea fishing) were calculated by the default $ CO_2$ emission factor and fuel consumption by fuel type, Emission of $CO_2$ was estimated to be 3.22 million $tCO_2$/year in 2007 for fisheries (excluding deep-sea fishing); when including deep-sea fishing, the estimated value increased to 4.11 million $tCO_2$/year. Fuel consumption per tonne of fishery production was 498 L, and the amount of $CO_2$ emission per tonne of production was 1.62 $tCO_2$. To calculate $CO_2$ emission more exactly, we must develop a system to compile energy balance statistics and introduce life-cycle assessment for the fishery industry.

• 한국항만경제학회지
• /
• 제34권1호
• /
• pp.65-80
• /
• 2018

본 연구는 2014년 10월 동안 인천항만에 기항하는 선박들의 온실가스 배출량을 추정하고자 시도되었다. 온실가스 배출량 추정을 위하여 AIS 데이터를 토대로 한 Bottom-up 방식을 활용하였으며 연료소비총량과 연료소비의 결과로서 발생한 이산화탄소 총량을 함께 분석하였다. 배출량 추정은 선박의 종류를 토대로 추정되었으며 각각 개별 선박의 날짜-시간 스템프 사이에서 그들의 움직임에 따라 계산되었다. 인천항에서 운항되는 최종 330 척(AIS-데이터)의 선박 샘플의 결과에 따르면 선박들의 총 이산화탄소 배출량은 164693.06 톤으로 추정되었으며, 연구기간동안 이들 선박의 총 연료소비량은 51953.64 톤에 이르는 것으로 나타났다. 선박의 종류에 따른 구체적 분석 결과를 살펴보면, 여객선이 배출량 81409.6톤으로 가장 오염이 심한 선박으로 나타났으며, 그 뒤를 이어 예인선 (37248.4톤), 화물선 (32154.6톤), 다른 활동에 사용된 선박 (9039.1톤), 화학 탱커 (4027.06톤) 그리고 어선 (814.048톤) 순으로 확인되었다.

• 콘크리트학회논문집
• /
• 제29권4호
• /
• pp.379-387
• /
• 2017

본 연구에서는 기존 PVA 섬유보강 시멘트 복합체(fiber-reinforced cementitious composites, FRCCs) 대비 성능유지 90% 이상을 목표로 하여 자원순환형 재료를 치환한 PVA FRCCs를 제조 및 개발하고자 하였다. 자원순환형 재료를 치환한 FRCCs의 압축, 휨 및 직접인장강도 시험을 통하여 역학적 특성을 분석하였으며, 이와 더불어 FRCCs의 제조단계에서 이산화탄소($CO_2$) 배출량을 국내 외 LCI 데이터베이스를 통하여 평가하였다. 실험을 통해 역학적 특성을 평가한 결과, 자원순환형 재료의 치환율이 증가함에 따라 압축, 휨 및 직접인장강도가 감소하는 경향으로 나타났다. $CO_2$ 배출량은 물결합재비(W/B)가 높고, 플라이 애시(FA)의 치환율이 높을수록 감소하는 것으로 나타났다. FA의 치환율이 증가함에 따라 결합재 지수($B_i$) 또한 증가하여 단위 강도(1 MPa)를 발휘하기 위한 결합재의 양이 보통 포틀랜드 시멘트보다 FA가 높은 것으로 나타났다. FRCCs의 성능을 유지하기 위해 설정된 목표치와 $CO_2$ 배출량을 동시에 고려해 볼 때 W/B 45%, FA 25% 및 순환 잔골재 25%가 치환된 배합이 가장 우수한 것으로 나타났다.

• 한국해양공학회지
• /
• 제35권6호
• /
• pp.393-402
• /
• 2021

As greenhouse gas emissions from maritime transport are increasing, the International Maritime Organization is continuously working to strengthen emission regulations. Liquefied natural gas (LNG) fuel is less advantageous as a point of CO₂ reduction due to the methane leakage that occurs during the bunkering and operation of marine engines. In this study, greenhouse gas emissions from an LNG-fueled ship were analyzed from the perspective of the life cycle. The amount ofmethane emission during the bunkering and operation procedures with various boil-off gas (BOG) treatment methods and gas engine specifications was analyzed by dynamic simulation. The results were also compared with those of other liquid fuel engines. As a result, small LNG-fueled ships without a BOG treatment facility emitted 32% more greenhouse gas than ships utilizing marine gas oil or heavy fuel oil. To achieve a greenhouse gas reduction via a BOG treatment method, a gas combustion unit or re-liquefaction system must be mounted, which results in a greenhouse gas reduction effect of about 25% and 30%. As a result of comparing the amount of greenhouse gas generated according to the BOG treatment method used with each tank size from the perspective of the operating cycle with the amounts from using existing marine fuels, the BOG treatment method showed superior effects of greenhouse gas reduction.