• Journal of the Korean Electrochemical Society
• /
• v.13 no.2
• /
• pp.103-109
• /
• 2010

$Li_4Mn_5O_{12}$ was synthesized by combustion method using $LiNO_3$, $Li(CH_3COO){\cdot}2H_2O$ and $Mn(CH_3COO)_2{\cdot}4H_2O$. $Li_4Mn_5O_{12}$ was obtained over $400^{\circ}C$, however, the sample calcined at $400^{\circ}C$ for any time was mixed phases of $Li_4Mn_5O_{12}$ and $Mn_2O_3$. $Li_4Mn_5O_{12}$ calcined at $400^{\circ}C$ for 5 h had larger first discharge capacity (41.5mAh/g) at 1C-rate for 3.7~4.4V than other calcined samples. Moreover, applying to hybrid capacitor, it had good discharge capacity (24.74 mAh/g or 10.46 mAh/cc) at 100 mA/g for 1~2.5 V and higher energy density (39Wh/kg or 16.49Wh/cc) at same condition.

• Proceedings of the Korean Vacuum Society Conference
• /
• 1999.07a
• /
• pp.58-58
• /
• 1999

The diamond films which can be applied to SOD (silicon-on-diamond) structure were deposited on Si(100) substrate using CO/H2 CH4/H2 source gases by microwave plasma chemical vapor deposition(MPCVD), and SOD structure have been fabricated by poly-silicon film deposited on the diamond/Si(100) structure y low pressure chemical vapor deposition(LPCVD). The phase of the diamond film, surface morpholog, and diamond/Si(100) interface were confirmed by X-ray diffraction(XRD), scanning electron microscopy(SEM), atomic force microscopy(AFM), and Raman spectroscopy. The dielectric constant, leakage current and resistivity as a function of temperature in films are investigated by C-V and I-V characteristics and four-point probe method. The high quality diamond films without amorphous carbon and non-diamond elements were formed on a Si(100), which could be obtained by CO/H2 and CH4/H2 concentration ratio of 15.3% and 1.5%, respectively. The (111) plane of diamond films was preferentially grown on the Si(100) substrate. The grain size of the films deposited by CO/H2 are gradually increased from 26nm to 36 nm as deposition times increased. The well developed cubo-octahedron 100 structure nd triangle shape 111 are mixed together and make smooth and even film surface. The surface roughness of the diamond films deposited by under the condition of CO/H2 and CH4/H2 concentration ratio of 15.3% and 1.5% were 1.86nm and 3.7 nm, respectively, and the diamond/Si(100) interface was uniform resistivity of the films deposited by CO/H2 concentration ratio of 15.3% are obtained 5.3, 1$\times$10-9 A/cm, 1 MV/cm2, and 7.2$\times$106 $\Omega$cm, respectively. In the case of the films deposited by CH4/H2 resistivity are 5.8, 1$\times$10-9 A/cm, 1 MV/cm, and 8.5$\times$106 $\Omega$cm, respectively. In this study, it is known that the diamond films deposited by using CO/H2 gas mixture as a carbon source are better thane these of CH4/H2 one.

• Korean Journal of Environmental Agriculture
• /
• v.7 no.1
• /
• pp.58-64
• /
• 1988

The acute oral, intraperitoneal and subacute toxicity of monocrotophos, an insecticide, was studied in albino rats. The acute oral $LD_{50}$ values for female and male rats were 5.0mg/kg and 8.7mg/kg, respectively. Conversely the intraperitoneal $LD_{50}$ values for female and male rats were 4.9mg/kg and 6.0mg/kg, respectively. Plasma cholinesterase (ChE) activity in rats treated with a single dose was the most depressed 4 hours after administration, but returned to normal within 72 hours of administration. Significant depression of body weight gain and food consumption was observed in rats receiving the 3.5mg/kg/day dose level for 28 days as compared with the controls. Additionally plasma ChE activity depression was also observed.

• Journal of Animal Environmental Science
• /
• v.11 no.1
• /
• pp.45-54
• /
• 2005

A field survey was conducted to determine the concentration of odor compounds from pig buildings and that were 20 meters within the boundary area. The odor compounds were measured from large, medium and small farms with enclosed and open housing systems and slurry and sawdust manure fermentation treatment methods. Among the odor compounds investigated, ammonia ($NH_3$) had the highest concentration at 0.9 ${\~}$ 21.0 ppm followed by Hydrogen Sulfide($H_2S$) with a wide variation concentration of 51.9 ${\~}$ 6,712.4 pub, Uethylmercaptan($CH_3SH$) with non-detectable (N. D.) ${\~}$ 12.9 ppb, Dimethylsulphide($(CH_3)_2S$), with N. D. ${\~}$ 5.2 ppb and Dimethyldisulphide($(CH_3)_2S_2$) with N. D. ${\~}$ 2.6 ppb. Considering the prevailing wind direction and air velocity ranging from 0.23 to 0.73 m/s within the boundary area, the odorous matters; $NH_3$, $H_2S$, $CH_3SH$, $(CH_3)_2S_2$ and $(CH_3)_2S$ were 0.2${\~}$4.5 ppm, 0.01 ${\~}$0.06 ppb, N. D. ${\~}$0.009ppb, N. D.${\~}$0.002ppb and N. D. for $(CH_3)_2S$ respectively. These findings suggested that the Odor compounds $(CH_3)_2S_2$ had the lower detection in the boundary area whilst $(CH_3)_2S$ had no detection level within a 20-meter distance only. However, with these results odor compounds from pig buildings has to be further investigated under more controlled environmental factors.

• Applied Chemistry for Engineering
• /
• v.33 no.2
• /
• pp.195-201
• /
• 2022

The main objective of this work is to prepare Rehmannia glutinosa extract (RE) incorporated functional chitosan (CH) based biomaterials and evaluate their physical properties, RE release properties, inhibitory effect of melanogenesis, and antioxidant and elastase inhibitory activities. RE incorporated CH based biomaterials were synthesized by a casting method and UV curing process. The surface and cross sections of prepared biomaterials were characterized by a field emission scanning electron microscope (FE-SEM). The physical properties such as tensile strength and elongation at break were also investigated. To apply the transdermal drug delivery system, RE release properties were examined with pH 4.5, 5.5, and 6.5 buffer solutions and artificial skin test at 36.5 ℃. Results indicated that RE release of RE incorporated biomaterials with/without the addition of plasticizers [glycerol (GL) and citric acid (CA)] at pH 6.5 was about 1.10 times higher than that of at pH 4.5. In addition, results of the artificial skin test verified that RE was released constantly for 6 h. To verify the applicability of the prepared biomaterials, tyrosinase, 2,2-diphenyl-1-picrylhydrazyl (DPPH), and elastase assays were investigated. Results indicated that RE incorporated biomaterials added CA exhibited tyrosinase activation, DPPH radical scavenging activity rate, and elastase activation of 45.12, 89.40, and 59.94%, respectively.

• Journal of the Korean Chemical Society
• /
• v.23 no.5
• /
• pp.277-285
• /
• 1979

CNDO/2 calculations on $XC_6H_4CH_2Cl,\;where\;X = H,\;p-CH_3,\;p-NH_2\;and\;p-NO_2$, and on benzyl radicals, cations and anions have been carried out in order to investigate nonlinear Hammett behavior. Main conclusions reached are: 1. Benzyl chloride exhibits borderline behavior due to ${\sigma}-{\pi}$ conjugation between C-Cl bond and the ring-system. 2. The extent of mutual conjugation can be judged by $\pi$-charge and bond alternation and interfrontier level separation narrowing effects. 3.The electron donating para substituent reduces the HOMO AO coefficient of the benzylic carbon, while the electron withdrawing para substituent reduces the LUMO AO coefficient of the benzylic carbon.

• Spatial Information Research
• /
• v.4 no.1
• /
• pp.13-20
• /
• 1996

This study has been on detection of land-cover change on Korean peninsula (including the area of north Korean territory) between May of 1990 year and that of 1995 year using NOAA AVHRR data. It was necessary that imagery data should be registered to each other and should not be deviated much in seasonal variation in order to recognize land - cover change. Atmosphic effect such as clould and dirt was erased by maximum NDVI(Normalized Difference Vegetation Index) method the equation of which was as following $$NDVI(i,j,d)=\frac{ch2(j,j,d)-ch1(i,j,d)}{ch2(i,j,d)+ch1(i.j,d)}$$ Each image of maximum NDVI of '90 year and '95 year was c1assifed onto 8 categories ,using iso-clustering method each of which was water, wet barren and urban, crop field, field, mixed vegetation, shrub, forest and evergreen.

• Bulletin of the Korean Chemical Society
• /
• v.25 no.4
• /
• pp.557-559
• /
• 2004

The aminolyses of anilinothioethers $(C_6H_5N(CH_3)CH_2SC_6H_4Z)$ in acetonitrile with benzylamines $(XC_6H_4CH_2NH_2)$ have been investigated. The rates are much lower in acetonitrile than in methanol (with aniline). The Bronsted ${\beta}_X$ values are similar but ${\beta}_Z$ values are smaller compared to those for the reactions in MeOH with anilines. The large negative ${\rho}_{XZ}({\cong}-0.8$, after correction for fall-off) value is interpreted to indicate a frontside attack $S_N2$ mechanism, in which the two oppositely changed reaction centers in the TS, $-N^{{\delta}+}{\cdots}S^{{\delta}-}-$, are in close vicinity increasing the interaction between nucleophile and leaving group. The inverse secondary kinetic isotope effects ($k_H/k_D$ < 1.0) are observed with deuterated benzylamines $(XC_6H_4CH_2ND_2)$.

• Journal of Korean Society for Atmospheric Environment
• /
• v.20 no.1
• /
• pp.77-85
• /
• 2004

In this study, the concentrations of reduced S compounds (including hydrogen sulfide (H$_2$S); methyl mercaptan ($CH_3$SH); dimethyl sulfide (($CH_3$)$_2$S); carbon disulfide (CS$_2$); and dimethyl disulfide (($CH_3$)$_2$S$_2$) were determined from landfill gas (LFG) in three municipal landfill sites in the two cities of Gwang Ju (GJ) and Jeju (JJ), Korea. The S gas concentrations measured in these landfill sites were found to be dominated by H$_2$S with its mean concentration of 850 ppm from 10 LFG samples. Both absolute and relative dominance of H$_2$S was seen to be significant in most LFG samples, except those collected from very old and inactive landfills. Unlike the pattern of H$_2$S, other S gases were typically observed at much reduced concentration levels (a few ppm or less) as follows: DMS (3.5); $CH_3$SH (1.3); CS$_2$(1.2); and DMDS (0.02 ppm). If compared equally in mass concentration unit (mg m$^{-3}$ ), H$_2$S generally explained far above 90% of all S gas masses determined concurrently. Moreover, as its mass concentration commonly exceeds those of the major aromatic VOC components in LFG (like benzene and toluene), it appeared to be one of the most dominant gaseous components emitted as LFG in a quantitative sense.

• Journal of the Korean Society of Combustion
• /
• v.17 no.3
• /
• pp.1-8
• /
• 2012

The CO emission characteristics of interacting hydrogen and methane partially premixed flames were numerically investigated. A counterflow geometry was introduced to establish interacting two partially premixed flames. An one-dimensional OPPDIF code was used to simulate the interacting flames. The GRI-v3.0 was used to calculate the chemical reactions. Emission index for CO(EICO) was evaluated to quantify the CO emitted from the interacting flames. The global strain rate and equivalence ratios for each flame(${\Phi}_{CH_4}$ and ${\Phi}_{H_2}$) were used as parameters to control the extent of interaction between two partially premixed flames. When ${\Phi}_{CH_4}$ was kept to stoichiometric condition and ${\Phi}_{H_2}$ was at rich condition, unburned H2 species of hydrogen flame was transported to the methane flame and affected reactions related with CO formation. When ${\Phi}_{CH_4}$ increased from a stoichiometry to rich condition while ${\Phi}_{H_2}$ was kept to stoichiometric condition, EICO increased initially, had a peak value at ${\Phi}_{CH_4}=1.5$ and decreased gradually. This could be elucidated with an analysis for the elementary reactions related with CO formation.