• Journal of the Korean Society of Marine Environment & Safety
• /
• v.5 no.2
• /
• pp.15-26
• /
• 1999

The marine structures with sea water cooling system always expose to the oceanic atmosphere. Therefore, the protection of the equipments is very important. To investigate the effectiveness of advanced composite materials for the application in offshore environments, the tensile test, hardness test, undercutting property test, permeance test and the friction and wear test were carried out by using various applicable coating materials. The main results obtained can be summarized as follows; 1. The micro-hardness of the Archcoat 502B showed the highest value. 2. The coefficient of friction of the Rigspray coating at the speed of 2.21m/sec showed the lowest value, and that of the Archcoat 502B coating at 1.08m/sec and 0.18m/sec indicated the lowest values. 3. The wear mass at the speed of 0.18m/sec and 1.08m/sec in dry condition showed the smallest values. 4. The Archcoat 502B coating is fitted to the dynamic instruments in the range of low speed and middle speed. Rigspray coating is fitted to the dynamic instruments in the range of high speed. 5. The wear mass of five kinds of coating materials at the range of low speed was very small, and those of the Archcoat S02B, Archcoat 402B and Rigspray coating at high speed range were quitely smaller than those of the Modified Epoxy and Tar Epoxy.

• Journal of Powder Materials
• /
• v.5 no.3
• /
• pp.199-209
• /
• 1998

A new low melting inorganic binder, monoclinic $HBO_2$, has been developed for Selective Laser Sintering (SLS) of alumina powder by dehydration process of boron oxide powder in a vacuum oven at $120^{\circ}C$. It led to better green SLS parts and higher bend strength far green and fired parts compared to other inorganic binders such as aluminum and ammmonium phosphate. This appeared to be due to its low viscosity and better wettability of the alumina particle surface. A low density single phase ceramic, aluminum borate ($Al_{18}B_4O_{33}$), and multiphase ceramic composites, $A_{12}O_3-A_{14}B_2O_9$, were successfully developed by laser processing of alumina-monoclinic $HBO_2$ powder blends followed by post-thermal processing; both $Al_{18}B_4O_{33}$ and $A_{14}B_2O_9$ have whisker-like grains. The physical and mechanical properties of these SLS-processed ceramic parts were correlated to the materials and processing parameters. Further densification of the $A_{12}O_3-A_{14}B_2O_9$ ceramic composites was carried out by infiltration of colloidal silica, and chromic acid into these porous SLS parts followed by heat-treatment at high temperature ($1600^{\circ}C$). The densities obtained after infiltration and subsequent firing were between 75 and 80% of the theoretical densities. The bend strengths are between 15 and 33 MPa.

• Journal of electromagnetic engineering and science
• /
• v.9 no.1
• /
• pp.7-11
• /
• 2009

An Ultra-WideBand(UWB) Low-Noise Amplifier(LNA) is proposed and is implemented in a $0.18-{\mu}m$ CMOS technology. The proposed UWB LNA provides excellent wideband characteristics by combining a High-Pass Filter (HPF) with a conventional resistive-loaded LNA topology. In the proposed UWB LNA, the bell-shaped gain curve of the overall amplifier is much less dependent on the frequency response of the HPF embedded in the input stage. In addition, the adoption of fewer on-chip inductors in the input matching network permits a lower noise figure and a smaller chip area. Measurement results show a power gain of + 10 dB and an input return loss of more than - 9 dB over 2.7 to 6.2 GHz, a noise figure of 3.1 dB at 3.6 GHz and 7.8 dB at 6.2 GHz, an input PldB of - 12 dBm, and an IIP3 of - 0.2 dBm, while dissipating only 4.6 mA from a 1.8-V supply.

• ETRI Journal
• /
• v.35 no.4
• /
• pp.638-643
• /
• 2013

This paper presents a 5-bit digital step attenuator (DSA) using a commercial 0.18-${\mu}m$ silicon-on-insulator (SOI) process for the wideband phased array antenna. Both low insertion loss and low root mean square (RMS) phase error and amplitude error are achieved employing two attenuation topologies of the switched path attenuator and the switched T-type attenuator. The attenuation coverage of 31 dB with a least significant bit of 1 dB is achieved at DC to 20 GHz. The RMS phase error and amplitude error are less than $2.5^{\circ}$ and less than 0.5 dB, respectively. The measured insertion loss of the reference state is less than 5.5 dB at 10 GHz. The input return loss and output return loss are each less than 12 dB at DC to 20 GHz. The current consumption is nearly zero with a voltage supply of 1.8 V. The chip size is $0.93mm{\times}0.68mm$, including pads. To the best of the authors' knowledge, this is the first demonstration of a low phase error DC-to-20-GHz SOI DSA.

• Journal of electromagnetic engineering and science
• /
• v.18 no.2
• /
• pp.108-116
• /
• 2018

In this paper, a method of designing a Vivaldi type phased array antenna (PAA) which operates at S-band (2.8-3.3 GHz) is presented. The presented antenna uses broadside coupled split ring resonators (BC-SRRs) for high isolation, wide field of view, and good active S-parameter characteristics. As an example, we design a $1{\times}8$ array antenna with various BC-SRR structures using theory and EM simulations. The antenna is fabricated and measured to verify the design. With the BC-SRR implemented between the two radiating elements, the isolation is shown to be enhanced by 6 dB, up to 23 dB. The scan angle is shown to be within ${\pm}53^{\circ}$ based on a -10 dB active reflection coefficient. The operation of the scan angle is possible within ${\pm}60^{\circ}$ with a little larger reflection coefficient (-7 dB to -8 dB). The proposed design with BC-SRRs is expected to be useful for PAA applications.

• Journal of Genetic Medicine
• /
• v.18 no.2
• /
• pp.147-151
• /
• 2021

The Say-Barber-Biesecker-Young-Simpson variant of Ohdo syndrome (SBBYSS) (Online Mendelian Inheritance in Man #603736) is a rare autosomal dominant disorder and clinically features blepharophimosis with ptosis, a mask-like facial appearance, cryptorchidism, congenital heart defect, long thumbs/great toes, and thyroid dysfunction. The etiology of SBBYSS has been shown to be due to heterozygous KAT6B gene mutation. Here we report a case of a neonate with SBBYSS identified a novel mutation in KAT6B gene. The patient showed typical dysmorphic facies, cryptorchidism with micropenis, overriding fingers, and long thumbs and toes at birth. He had also hypothyroidism, large atrial septal defect, and sensorineural hearing loss. The next generation sequencing identified a heterozygous novel variant, c.5206C>T (p.Gln1736Ter) in KAT6B gene. At the 9 months of age, he underwent patch closure for atrial septal defect. Until the 12-month follow-up, he was under-developed.

• Research in Plant Disease
• /
• v.17 no.1
• /
• pp.99-101
• /
• 2011

The ascomycetous fungus Taphrina wiesneri, the pathogen of cherry witches' broom, is highly pathogenic to Prunus yedoensis, the most widely planted cherry trees in Korea as park and roadside trees. A collection of 13 strains of the pathogen in Korea and Japan was characterized by 18S rDNA gene sequence and restriction fragment length polymorphism (RFLP) analysis. In cluster analysis based on 18S rDNA gene sequence the strains were divided into 2 clusters. In RFLP analysis of the rDNA-IGS region using HhaI, the strains were separated into four patterns, B, C, D and G, of which pattern G was new.

• Asian-Australasian Journal of Animal Sciences
• /
• v.17 no.8
• /
• pp.1053-1061
• /
• 2004

Of the 20 arbitrarily chosen primers, six oligonucleotides decamer primers were used on the basis of the number of the polymorphisms generated in catfish (Silurus asotus) from Yesan and bullhead (Pseudobagrus fulvidraco) from Dangjin in Korea. Six primers were used generating a total of 602 scorable bands in catfish and 195 in bullhead population, respectively, ranging in size of DNA fragments from less than approximately 100 to larger than 2,000 base pairs (bp). Six primers yielded 199 polymorphic fragments (33.1%) in catfish and 47 (24%) in bullhead, respectively. In the present study, a total of 328 common fragments (an average of 54.7 per primer) were observed in catfish population, whereas 84 (an average of 14.0 per primer) in bullhead. The total number of specific fragments in catfish and bullhead population were 76 and 64, respectively. In catfish population, random decamer, OPA-17 (GACCGCTTGT) generated the highest number of fragments (a total of 141) in comparison with other primers used, with an average of 11.8. The common bands in the molecular weight of 300 bp generated by random primer OPA-06 (GGTCCCTGAC) were present in every individuals in bullhead population. The major polymorphic bands in the molecular weight of 100 bp generated by OPA-17 were identified in lane 14, 15, 17, 18, 19 20 and 21, which were identifying species in bullhead population. The average bandsharing values (BS values) of all of the samples within catfish population ranged from 0.575 to 0.945, whereas 0.063-1.000 within bullhead population. The bandsharing value (index of similarity between individuals) between individual No. 5 and No. 9 showed the highest level within catfish population, whereas the bandsharing value between individual No. 1 and No. 2 showed the lowest level. The single linkage cluster analysis resulted from four primers, indicating four genetic groupings composed of group 1 (C1-C10, all of the catfish samples), group 2 (B11, B12, B13, B14, B16, B17, B18, B19), group 3 (B15) and group 4 (B20 and B21). The dendrogram reveals close relationships between individual identities within two species populations and individuals derived from the same ancestor, respectively. However, genetic distances between two species populations ranged from 0.124 to 0.333. The shortest genetic distance (0.042) displaying significant molecular differences was between individual No. 6 and No. 9 catfish population. The shortest genetic distance (0.033) displaying significant molecular differences also was between individual No. 18 and No. 19 in bullhead population. Reversely, the genetic distance of individual No. 20/21 among individuals in bullhead population was highest (0.333). This result showed that bullhead No. 20 and 21 were distinct from other individuals within bullhead population.

• 한국해양학회지
• /
• v.30 no.4
• /
• pp.302-319
• /
• 1995

The geochemical properties, sedimentation rates, foraminiferal distributions, and oxygen and carbon isotope records of sediment from Cores S-2 and S-19 were studied to investigate late Holocene paleoceanographic and paleoclimatic changes of the admiralty and Maxwell Bay, King George Island, Antarctica. Total organic carbon contents increased from the lower part to the upper part of Cores S-2 and S-19, whereas calcium carbonate contents decreased from the lower part to the upper part of Cores S-2 and s-19,whereas calcium carbonate contents decreased from the lower part to the upper part of Cores S-2 and S-19. Twenty-seven foraminiferal species were identified, and Globocassidurina biora was mostly a bundant in sediment samples. The sedimentation rates ranged from 24 cm/kyr to 237 cm/kyr based on /SUP 14/C-age dating of G. biora. The sedimentation rates increased rapidly in the upper part of the Cores. б/SUP 18/O values ranged from 0.3% to 6.2% and б/SUP 13/C values ranged from -3.0% to 0.0% with several fluctuations of the values. The lowest part of Core S-2, at 128 cmbsf in depth, had a /SUP 14/C-age of 3,100${\pm}$60 yr B.P. and the lowest part of Core S-19, at 230 cmbsf in depth, of 7,400${\pm}$ yr B.P. The results of geochemical and sedimentological analyses of the core sediments suggested five stages of paleoceanographic and paleoclimatic changes as follows: war,-cold stage of 7,500∼6,500 yr B.P., cold stage of 6,500∼3,600 yr B.P., cold-warm stage of 3,600∼2,770 yr B.P., warm stage of 2,770∼2,380 yr B.P. and cold-warm stage of 2,380∼2,100 yr B.P.

• Journal of fish pathology
• /
• v.10 no.2
• /
• pp.125-135
• /
• 1997

The possibility of identification of families of antibacterial agent residues in fish tissue was studied by disk assay using three test organisms, Bacillus subtilis BGA, Micrococcus luteus ATCC 9341, and Bacillus cereus var. mycoides ATCC 11778. In the present method, a simple clean-up procedure was performed to obtain the aqueous solution from homogenized flounder muscle sample(10g) in Mcilvaine buffer. Then, aqueous solution was fractionated into A and B to be used in disk assay by choloroform and Sep-Pak $C_{18}$ cartridge column after being defatted in hexane. The chloroform layer of fraction A was used for the analysis of macrolide antibiotics(ML), sulfa drugs(SA), chloramphenicol(CP), and quinolone antibiotics(QN). Adsorbed materials to Sep-Pak $C_{18}$ of fraction B were also employed for the analysis of penicillins(PC), tetracyclines(TC), and nitrofuran derivatives(NF) Minimun-detectable concentrations by the present method were, $0.1{\mu}g$/g for oxytetracycline, tetracycline, doxycycline, spiramycin and ciprofloxacin, $0.025{\mu}g$/g for erythromycin and ampicillin, $1.0{\mu}g$/g for sodium nifurstyrenate and florfenical, $0.25{\mu}g$/g for sulfamonomethoxie and sulfadimethoxine, $2.5{\mu}g$/g for oxolinic acid and flumequine, and $15{\mu}g$/g for piromidic acid, respectively. Three test organisms showed different sensitivity patterns for each family of antibacterial agent. Sensitivity patterns were B. cereus > B. subtilis > M. luteus for TC and NF, M. luteus > B, subtilis > B. cereus for ML and PC, B. cereus = B. subtilis > M. luteus for CP and QN, and B. subtilis > B. cereus＝M. luteus for SA. The present method utilizing these characteristics could be useful as a routine screening test for the determination of family of antibacterial agent residues in fish tissue.