• Journal of Powder Materials
• /
• v.9 no.1
• /
• pp.25-31
• /
• 2002

The efects of mechanical aloying conditions and the type of reducing agent on the solid state reductionof haematite $Fe_2O_3$ have been investigated at room temperature. Aluminium titanium zinc and copper were used as reducing agent. Nanocomposites of metal-oxide in which oxide particles with nano size were dispersed in Fe matrix were obtained by mechanical alloying of $Fe_2O_3$ with aluminium and titanium respectively However the reduction of $Fe_2O_3$ by coppe was not occurred Composite materials of iron with $Al_2O_3$ and $TiO_2$ were obtained from the system of $Fe_2O_3-Al$ and $Fe_2O_3-Ti$ after ball milling for 20 hrs and 30 hrs respectively. And the system of $Fe_2O_3-Zn$ resulted in the formationof FeO with ZnO after ball milling of 120 hrs. The final grain sizes of iron estimated by X-ray diffraction line-width measurement were in the ranges of 24~33 nm.

• Journal of Power System Engineering
• /
• v.17 no.1
• /
• pp.91-96
• /
• 2013

The present paper focuses on the fabrication of materials with higher thermal conductivity. Nanofluid is a novel transfer prepared by dispersing nanometer-sized solid particles in traditional heat transfer fluid to increase thermal conductivity and heat transfer performance. The purpose of this study is making the nano-size particle. The experiment of MWCNT and $Al_2O_3$ was carried out using a planetary ball mill at several rotation speeds: 200 ~ 400 rpm. The results were examined using scanning electron microscope(SEM). In the case of the MWCNT, it could be more grinding into the small particle in the dry condition and it confirm in the case of the $Al_2O_3$ to be more grinding into the small particle contrary to the MWCNT in the wet condition. In the mixture grinding result of MWCNT and $Al_2O_3$, the dry condition showed the good result in low rotation speed than the wet condition.

• Journal of the Korean Ceramic Society
• /
• v.41 no.9
• /
• pp.684-689
• /
• 2004

Hexagonal sheet typed $\alpha$-Al$_2$O$_3$ nano particles were synthesized successfully at various conditions with the aluminum sulfate solution extracted from kaolin through the conventional and microwave assisted polyacrylamide (PAA) gel methods. Shorter gel time and higher yield were obtained in the microwave assisted PAA gel method, compared to conventional method. the size of nano particles was not changed by increasing the concentration of aluminum sulfate, but decreased with increasing the concentration of cross-linking agent in both the conventional and microwave samples. Above 0.01M concentration of cross-linking agent, the sizes of nano particles in the microwave samples were relatively larger than those in the conventional samples.

• Journal of the Korean Ceramic Society
• /
• v.25 no.3
• /
• pp.284-292
• /
• 1988

Alumina-zirconia composite powders for the purpose of improving fracture toughness and thermal shock resistance of alumina were prepared by the emulsion-kerosene drying method. The average particle size of composite powders was less then 1 $\mu\textrm{m}$ and their shapes were spherical. It was shown that the average particle size of composite powders decreased with the concentration of metal-salt in solution and the amount of span 80 added when preparing emulsions. The structure of all zirconia in composite powders heat-treated at 1200$^{\circ}C$ was a tetragonal form at room temperature. This result implied that fine zirconia particles were homogeneously dispersed in the alumina matrix.

• Journal of the Korean Ceramic Society
• /
• v.25 no.3
• /
• pp.193-200
• /
• 1988

The starting materials were aluminum hydroxide prepared by precipitation method at the conditions of pH values; 7, 9, 10 and 11. The properties of alumina powder on heat-treatment were studied. After dehydrating structural water from amorphous aluminum hydroxide, the first formed phase was amorphous alumina and its specific surface are was decreased. The specific surface area was increased by dehydration of structural water from aluminum hydroxides except amorphous aluminum hydroxide. The specific surface area was increased with increase of the ratio of A1OOH to $A1(OH)_3$ in the region of transition aluminas. The rate of transition from aluminum hydroxide to alpha alumina occurred in the order of 7, 10, 9 and 11 of pH values. The morphology of alpha alumina powders was skeleton particles remaining outer shape of aluminum hydroxide. Both the elevation of heat-treatment temperature and the transition toalpha alumina decreased specific surface area and brought about the growth of particles.

• Applied Chemistry for Engineering
• /
• v.17 no.2
• /
• pp.188-193
• /
• 2006

Synthesis of Boehmite particles were performed through the precipitation of aluminium nitrate ($Al_{3}(NO_{3})_3{\cdot}9H_{2}O$) with ammonia water ($NH_{4}OH$) by changing solution pH, mixing procedure, temperature, and feeding flux. The influence of the synthesis condition, which affected on the pH range of the Boehmite formation, particle morphology and pore property, was investigated. The Boehmite particles were formed in the reaction solution of pH 7.5~9. The particles prepared by P2jet type which maintained the pH uniformly during the precipitation resulted in homogeneous particles and pores because of the constant concentration of the reacted ion in the solution. It was resulted in the improvement of the specific surface area and pore volume of the particle at the same time. With the increasing of temperature and the decreasing of the feeding flux, it was occurred the large specific surface area and pore volume. Also it was presented the fibrillar shaped particles upper $60^{\circ}C$ of the reaction temperature. In this study, the optimal condition of the porous Boehmite was in P2jet type with $90^{\circ}C$ of reaction temperature and 2.5 mL/min of the feeding flux. At this time, the specific surface area, pore volume, and average pore size was $385.46m^2/g$, 1.0252 mL/g, 10 nm, respectively.

• Journal of the Korean Ceramic Society
• /
• v.40 no.3
• /
• pp.249-254
• /
• 2003

AI, AIN and additives such as Li$_2$CO$_3$, Y$_2$O$_3$ and CaCO$_3$ which promoted nitridation were mixed, formed and heat-treated in nitrogen atmosphere. The effect of solvent, additive and temperature on nitridation of AI-AIN system was studied. When ethanol containing 1 wt% oleic acid was used as a mixing solvent, the formation of oxide was minimized due to surface modification of AI and AIN particles. The addition of Li$_2$CO$_3$ or CaCO$_3$ as an additive extremely diminished the formation of oxide which formed during heat treatment for nitridation compared with the addition of Y$_2$O$_3$.

• Applied Chemistry for Engineering
• /
• v.22 no.3
• /
• pp.323-327
• /
• 2011

A zeolite sheet (ceramic paper containing zeolite) made in a cylindrical configuration can be applied to a honeycomb rotor for the effective VOC removal. In this study, the zeolite sheet containing ZSM-5 was used as a support for Pt-loading, and its catalytic activity for the toluene combustion reaction was compared with those of the other Pt catalysts loaded on ${\gamma}-Al_2O_3$ and cordierite honeycomb. Pt/zeolite sheet catalyst showed a higher activity for toluene combustion reaction than that of $Pt/{\gamma}-Al_2O_3$ or Pt/cordierite honeycomb. On the other hand, the dispersion of Pt particles loaded on the zeolite sheet was improved by the pretreatment with $NH_3-H_2O$ vapor at room temperature. Consequently, the pretreatment of Pt/zeolite sheet by $NH_3-H_2O$ vapor significantly enhanced the catalytic activation for toluene combustion reaction.

• Analytical Science and Technology
• /
• v.21 no.3
• /
• pp.229-236
• /
• 2008

$C/TiO_2$ composites were prepared with surface modified MWCNT sequentially after HCl treatment and TNB as titanium source. There is a single crystal structure which is anatase in all of the samples from the data of XRD. The SEM microphotographs of $C/TiO_2$ composites show that the $TiO_2$ particles were well mixed with the CNT. There are C, O and Al with strong Ti peaks in all samples from EDX results, and it also shows that the sample CT has much more amount of C and Ti content than that of sample HCT. Finally, the photocatalytic activities for the $C/TiO_2$ composites have more effective than that of pristine $TiO_2$.

• Journal of the Korean Applied Science and Technology
• /
• v.23 no.3
• /
• pp.243-251
• /
• 2006

Field emission display(FED) is actively investigated in view of the development of full color flat-panel display, which can replace some cathode-ray tube(CRT). Thus, the development of new phosphors appropriate for FED is urgently needed and has been actively investigated. In this work, $SrTiO_3:Pr^{3+}$ phosphor was prepared by sol-gel method and the coating was applied by sol-gel method combined with sonication on these phosphor's surface into diluted precursor solution. It was found that very fine particles of coating material were formed on phosphor's surface. The luminescent intensity of $SrTiO_3:Pr^{3+}$ phosphor coated with $SiO_2$ and $Al_2O_3$ was considerably increased without any noticeable change in color chromaticity. The optimum concentration of coating material was found to be 1wt% and the optimum pH value of the solution was 10.