Journal of the Korean Ceramic Society (한국세라믹학회지)

The Korean Ceramic Society (한국세라믹학회)
권호 표지
DOI QR코드

DOI QR Code

Effect of Surface Modification and Additives on Nitridation of Al-AlN System

Al-AlN계 질화반응에 대한 표면개질 및 첨가제의 영향

  • 유재영 (한국과학기술정보연구원 부품소재정보실) ;
  • 김용남 (연세대학교 세라믹공학과) ;
  • 황명익 (연세대학교 세라믹공학과) ;
  • 박정현 (연세대학교 세라믹공학과)
  • Published : 2003.03.01
Download PDF
⟨ Previous Next ⟩

Abstract

AI, AIN and additives such as Li$_2$CO$_3$, Y$_2$O$_3$ and CaCO$_3$ which promoted nitridation were mixed, formed and heat-treated in nitrogen atmosphere. The effect of solvent, additive and temperature on nitridation of AI-AIN system was studied. When ethanol containing 1 wt% oleic acid was used as a mixing solvent, the formation of oxide was minimized due to surface modification of AI and AIN particles. The addition of Li$_2$CO$_3$ or CaCO$_3$ as an additive extremely diminished the formation of oxide which formed during heat treatment for nitridation compared with the addition of Y$_2$O$_3$.

AI, AIN 및 질화반응 촉진을 위한 첨가제로서 Li$_2$CO$_3$, Y$_2$O$_3$, CaCO$_3$를 혼합한 후 성형체를 제조하여 질소 분위기에서 열처리하였고, 용매 및 첨가제의 종류와 질화온도가 AI-AIN계의 질화반응에 미치는 영향에 대하여 고찰하였다. 1.0wt%의 olcic acid.를 첨가한 ethanol을 혼합용매로 사용한 경우 AI과 AIN 입자의 표면개질 효과를 질화반응시 산화물 생성을 최소화시킬 수 있었다. 그리고 AI-AIN계에 Li$_2$CO$_3$ 또는 CaCO$_3$를 첨가한 경우Y$_2$O$_3$를 첨가한 경우에 비하여 질화 열처리시 생성되는 산화물의 생성을 크게 억제시킬 수 있었다.

Keywords

References

  1. Ceram. Jpn. v.26 no.8 Aluminum Nitride Ceramics-historical Review and Future Trend K.Komeya
  2. Ceram. Jpn. v.26 no.8 Recent Progress in Aluminum Nitride Powder H.Taniguchi;N.Kuramoto
  3. Ceram. Jpn v.26 no.8 High-thermal Conductivity Aluminum Nitride Ceramics F.Ueno;A.Tsuge
  4. Key. Eng. Mater. Aluminum Nitride : Processing and Applications Y.Baik;R.A.L.Drew
  5. Ceram. Jpn. v.26 no.8 AIN Composite Ceramics T.Funahashi;K.Isomura
  6. Mater. Sci. Tech. v.9 Aluminum Nitride : Review of Synthesis Methods G.Selvaduray;L.Sheet https://doi.org/10.1179/mst.1993.9.6.463
  7. J. Am. Ceram. Soc. v.73 no.3 Degradation of Nitride Powder in an Aqueous Environment P.Bowen;J.G.Highfield;A.Mocellin;T.A.Ring https://doi.org/10.1111/j.1151-2916.1990.tb06579.x
  8. Key. Eng. Mater. v.159-160 Preparation and Properties of Moisture-resistant Aluminum Nitirde Powder Y.Nagai;G.C.Lai https://doi.org/10.4028/www.scientific.net/KEM.159-160.47
  9. J. Ceram. Soc. Jpn. v.100 no.1 Oxidation of Sintered Aluminum Nitride by Oxygen and Water Vapor Y.Kuromitsu;H.Yoshida;S.Ohno;H.Masuda;H.Takebe;K.Morigana https://doi.org/10.2109/jcersj.100.70
  10. J. Am. Ceram. Soc. v.77 no.7 Effect of Carboxylic Acid Adsorption on the Hydrolysis and Sintered Properties of Aluminum Nitride Powder M.Egashira;Y.Shimizu;Y.Takao;R.Yamaguchi;Y.Ishikawa https://doi.org/10.1111/j.1151-2916.1994.tb07053.x
  11. Mater. Res. Bull. v.32 no.9 Effect of Thermal Oxidation Treatment in Air on the Hydrolysis of AIN Power Y.Q.Li;T.Qiu;J.Xu https://doi.org/10.1016/S0025-5408(97)00093-7
  12. J. Mater. Sci. v.30 Hydrophobing of Aluminum Nitride Powders D.Hotza;O.Sahling;P.Greil https://doi.org/10.1007/BF00352141
  13. Anal. Chem. v.61 no.21 Diffuse-reflectance Fourier Transform Infrared Spectroscopic Studies of the Stability of Aluminum Powder in an Aqueous Environment J.G.Highfield;P.Bowen https://doi.org/10.1021/ac00196a016
  14. J. Mater. Sci. Lett. v.15 Suface Modification of Aluminum Nitride Powder Y.Q.Li;T.Qui;X.C.He https://doi.org/10.1007/BF00275333
  15. Am. Ceram. Soc. Bull. v.73 no.11 Aqueous Slip Casting of Stabilized AIN Powders E.A.Groat;T.J.Mroz
  16. Surface Tech. v.26 Thermal and Spectroscopic Measurements of the Interactions of Oleic Acid with Surfaces of Aluminum, Magnesium and Al-Mg Alloys R.A.Ross;R.Lemay https://doi.org/10.1016/0376-4583(85)90004-4
  17. J. Euro. Ceram. Soc. v.6 Synthesis of High Purity AIN by Nitridation of Li-doped Al-melt H.Scholz;P.Greil https://doi.org/10.1016/0955-2219(90)90050-P
  18. Ceram v.26 no.8 AIN, Compositional Polytype Y.Bando
  19. J. Mater. Sci. v.31 no.13 Carbothermal Reduction and Nitridation of Aluminum Hydroxide W.H.Tseng;C.I.Lin https://doi.org/10.1007/BF00360762