• Korean Journal of Ichthyology
• /
• v.17 no.4
• /
• pp.248-254
• /
• 2005

Integumentary structure of the amberjack, Seriola dumerili, was examined by light and transmission electron microscopy. Integument of the amberjack consists of epidermal and dermal layers. The epidermal thickness is about $28.32{\mu}m$. The epidermal layer could be classified into superficial, intermediate, and basal layers by morphology and position of the supporting cells. Secretory cells of the epidermal layer were classified into mucous cells and club cells in the amberjack. Mucous cells contained acidic mucous and were alcian-blue positive with AB-PAS (pH 2.5) reaction. The club cells contained well-developed rough endoplasmic reticula and large central vacuole. Also, filament-rich cells were identified in the epidermal layer. The dermal layer consists mainly of collagenous fiber, and it contains fibrocytes and pigment cells. The cytoplasm of fibrocyte had a well-developed rough endoplasmic reticulum. The pigment cells contained electron-dense melanin granules.

• Journal of the korean academy of Pediatric Dentistry
• /
• v.37 no.1
• /
• pp.73-81
• /
• 2010

The objective of this study was to evaluate the color stability of new silorane-based composite resin compared with methacrylate-based composite resins after immersion in 3 staining solutions. One silorane-based composite(Filtek P90) and 3 methacrylate -based composites(Filtek Z250, Filtek Z350, Tetric Ceram) were evaluated. Twenty disk-shaped specimens($10{\times}2mm$) of each of 4 composite resins were prepared. The specimens were then divided into 4 groups of 5 specimens each and immersed in 3 staining solutions( coffee, red wine, curry solution) or distilled water(control) for 28-day test period. Color of the specimens was measured with a spectrophotometer(Color Eye 7000A) using CIE $L^*a^*b^*$ color space relative to CIE standard illuminant D65 at baseline, 1day, 3days, 7days, 14days, 21days and 28days after staining. The color differences( ${\Delta}{E^*}_{ab}$) were calculated. The results were obtained as follows ; 1. The mean color changes(${\Delta}{E^*}_{ab}$) of the composites were greatest in curry solution, then red wine, coffee and distilled water, in decreasing order. 2. The mean color changes(${\Delta}{E^*}_{ab}$) of the composites were greatest in Z350, Z250, Tetric Ceram and P90, in decreasing order.

• Journal of the Korean Chemical Society
• /
• v.27 no.5
• /
• pp.330-339
• /
• 1983

The CNDO/2 and STO-3G calculations were performed on nitrogen, oxygen, and sulfur compounds in order to examine the effect of interactions between two nonbonding (n) orbitals in the same molecule separated by N intervening $\sigma$ bonds based on the PMO approach. Calculated basis level energies, energy splittings, and interaction energy changes for both chain and cyclic model compounds were qualitatively compared with the corresponding predictions derived from perturbational formalism for n-n orbital interactions and successfully explained in terms of the derived energy expressions. In general, through-space interaction term could be neglected in the N and O systems. And the calculated results were explained simply by through-bond interaction term. As a result, through-bond interaction placed n- below n+ for odd systems and n+ below n- for even systems. Also energy splittings in odd systems were larger than those in even systems. However, in the cases of cis-ethylene diamine and o-phenylene diamine(conformer VI in Table 4), through-space interaction term was found to be substantial and the opposing effects of through-space and through-bonds interactions were observed. Finally it was found that the interactions between two n orbitals on S atoms always had some contribution of the destabilizing through-space interaction term. This result was consistent with the fact that the lone pair lobes of third elements were larger in size than those of the second period elements.

• Korean Journal of Poultry Science
• /
• v.12 no.2
• /
• pp.75-82
• /
• 1985

This study was carried out to estimate combining abilities and heterosis in White Cornish and White Plymouth Rock. The data were obtained over an 8weeks period from 3rd Oct., 1984 to 28th Nov. 1984 at the Livestock Experiment Station. A total of 810 birds, composed of 369 pure strains, 270 two-way crosses, and 180 fourway crosses were average amount of heterosis expressed as a ratio was 1.63% for livability, 5.47% for body weight at 8 weeks, 5.57% for weight gain from day old to 8 weeks and -5.98% for feed requirement. Specific combining ability were statistically significant for all of the traits examined in this study. Although the general combining ability was not significant for any of the traits, strain A appears to be superior to other strains.

• Korean Chemical Engineering Research
• /
• v.52 no.2
• /
• pp.266-271
• /
• 2014

The effects of antioxidants on the properties of Polycarbonate/Acrylonitrile-Butadiene-Styrene(PC/ABS) blends were studied for the functions of the screw speed and loaded duration of high shear rate processing in order to investigate the degradation for PC/ABS blends. Tris-(2,4-di-tert-butyl-phenyl phosphate) (A1) and Bis(2,4-dicumylphenyl) pentaerythritol diphosphite (A3) as phosphite antioxidants and Octadecyl 3-(3,5-di-tert-butyl-4-hydroxyphenyl) propionate (A2) as a phenolic antioxidant are used. The thermal properties were detected by TGA and severely decreased, after the processing. The stress-induced and thermal degradation for PC/ABS blends with the antioxidant A3 was retarded better than the others. By using UTM, the mechanical properties also showed individually decreased according to the antioxidants, after the processing, especially, the elongations showed considerable decline behaviors, while the tensile strengths of PC/ABS blends changed very little. For example, in the operating conditions of 1000rpm of screw speed and 20 seconds of loaded period, the elongations decreased from 148% before the processing, to 91.6% with the A1, to 63% with the A2 and to 131% with the A3 after the processing, respectively. In order to get the morphological properties, the size distributions of the dispersed phases for PC/ABS were investigated by SEM analysis and tended to decrease, as the screw speed and loaded period of the processing increased. Therefore, we confirmed that the antioxidant A3 was the best of all of three to inhibit the stress-induced degradation of PC/ABS blends during the high shear rate processing.

• Journal of Conservation Science
• /
• v.36 no.5
• /
• pp.306-314
• /
• 2020

The use of synthetic resins in ceramic restoration poses several challenges, including aging and potential damage to artifacts, which has raised the need to investigate new materials and restoration methods. This study set out to incorporate full color 3D printing into the 3D digital technology-based restoration method, an emerging approach currently being researched, and to print out missing parts with color information. After examining material physical properties with an experiment, the investigator printed out missing parts from a white porcelain vessel and grayish-blue-powdered celadon plate and compared them in chromaticity and brilliance. The experimental results show that the outputs had comparable tensile strength to the original restoration materials, whereas the recorded compressive strength was approximately 1.4~2 times higher than that of the original restoration materials. According to the NIST table of color difference values, the white porcelain vessel was visible at ΔE^*ab 1.55, and the grayish-blue-powdered celadon plate was perceivable at 3.34. Even though it was impossible to express the colors accurately owing to printer limitations, this non-contact approach reduced the possibility of damage to the minimum. In conclusion, it can be applied to objects with a high chance of damage or generate display effects through purposeful color differentiation in missing parts.

• Journal of Animal Science and Technology
• /
• v.51 no.4
• /
• pp.265-272
• /
• 2009

A total of 486 milk records were collected from 16 diary farms in Imsil-gun, Jeollabuk-do. Results obtained were as follows: The average 3MG (amount of milk within the first three minute) was 7.44 kg and 55% of total milk yield was produced within 3 min. The average of SPL (% of foam in milk) was 33.93% and the average of MNG (strip yield) was 0.14 kg, which was less than 1% of total milk yield. The averages of HMF (highest milk flow), HMG (maximum milk flow rate in one minute) and DMHG (average milk flow in the main milking phase) were 3.03 kg/min, 2.94 kg/min and 2.05 kg/min, respectively and the average milking speed in Imsil-gun was slower than other regions. The average of tS500(time to reach 0.5 kg/min at beginning) was 0.23min (about 14 seconds) and that of tMGG (duration of the total milking) was 7.75min. The average tMBG (duration of the dry milking phase) was 0.58 min (35 seconds) and that of tMNG (duration of the stripping phase) was 0.42min (14 seconds). The averages of ELHMF (electrical conductivity at highest milk flow) and ELAP (beginning peak level of the electrical conductivity) were 6.81 mS/cm and 7.58 mS/cm, respectively. The average of ELMAX (maximum electrical conductivity) was 7.48 mS/cm and that of ELAD (beginning peak difference of the electrical conductivity) was 0.61 mS/cm. While the total milk yields for DMHG, tMHG (duration of the main milking phase), tPL (duration of the plateau phase), tAB (duration of the descending phase) and tMGG were positively correlated (0.35~0.54), those for tMBG and SPL were negatively correlated (-0.11 and -0.27). As the DMHG increased, tMHG, tPL, tAB, tMGG and SPL decreased. While the cows with higher electrical conductivity at the beginning of milking had less somatic cell counts, cows with higher electrical conductivity after the peak of milk yield had more somatic cell counts. The results of this experiment indicated that through milking based on milking and lactating standards and the regular checking of milking status, the qualities of milk and milk yields could be improved.

• Journal of the Korean Magnetics Society
• /
• v.25 no.4
• /
• pp.101-105
• /
• 2015

Recent theoretical calculations predicted that a system composed exclusively of 3d transition metals without 4d/5d transition metals or rare earth metals can have strong perpendicular magnetocrystalline anisotropy (MCA) if Fe and Ni layers are arranged appropriately. They considered only Fe-terminated surfaces, noting that Fe/MgO(001) and CoFeB/MgO(001) show strong perpendicular MCA. In this paper, we investigate magnetism and MCA of Ni/Fe(001) surface where Ni layer is positioned at the surface, by using complementarily the first principles calculational methods of Vienna Ab-initio Simulation Package (VASP) and Full-potential Linearized Augmented Plane Wave (FLAPW) method. Comparing results of magnetism and MCA obtained by VASP with the results by FLAPW method, we find the VASP results do not show big difference from results by FLAPW method. Magnetic moments of Fe and Ni are enhanced due to strong hybridization between Fe and Ni bands. MCA of Ni/Fe(001) is parallel to the surface, which implies the surface termination plays a crucial role in determining MCA of a system.

• Journal of the Korean Chemical Society
• /
• v.39 no.7
• /
• pp.564-571
• /
• 1995

5-Amino-2H-1,2,4-thiadiazoline-3-one has been prepared from 2-thiobiuret through a oxidative cyclization under basic hydrogen peroxide condition. Lactam-lactim tautomerism of 5-amino-2H-1,2,4-thiadiazoline-3-one has been examined by spectroscopic methods and ab initio molecular orbital calculation. These results were shown that 5-amino-2H-1,2,4-thiadiazoline-3-one exists as lactam form. Reaction conditions for alkylating 5-amino-2H-1,2,4-thiadiazoline-3-one with alkyl halides in the presence of various bases were studied in DMF and $H_2O$-THF two phase system. $Li_2CO_3$ base in DMF method gave best result in this investigation. The alkylation has been taken place at N-2 position. The identification of the product is confirmed by spectral data of IR, $^1H$ NMR and $^13C$ NMR and the comparison of authentic sample, 5-amino-2-methyl-1,2,4-thiadiazolidine-3-one, obtained from the oxidative cyclization of 5-methyl-2-thiobiuret.

• The Korean Journal of Nuclear Medicine Technology
• /
• v.23 no.1
• /
• pp.35-39
• /
• 2019

Purpose Hepatitis B virus (hepatitis B virus, HBV) infection is a worldwide major public health problem and it is known as a major cause of chronic hepatitis, liver cirrhosis and liver cancer. And serologic tests of hepatitis B virus is essential for diagnosing and treating these diseases. In addition, with the development of molecular diagnostics, the detection of HBV DNA in serum diagnoses HBV infection and is recognized as an important indicator for the antiviral agent treatment response assessment. We performed HBeAg assay using Immunoradiometric assay (IRMA) and Chemiluminescent Microparticle Immunoassay (CMIA) in hepatitis B patients treated with antiviral agents. The detection rate of HBV DNA in serum was measured and compared by RT-PCR (Real Time - Polymerase Chain Reaction) method Materials and Methods HBeAg serum examination and HBV DNA quantification test were conducted on 270 hepatitis B patients undergoing anti-virus treatment after diagnosis of hepatitis B virus infection. Two serologic tests (IRMA, CMIA) with different detection principles were applied for the HBeAg serum test. Serum HBV DNA was quantitatively measured by real-time polymerase chain reaction (RT-PCR) using the Abbott m2000 System. Results The detection rate of HBeAg was 24.1% (65/270) for IRMA and 82.2% (222/270) for CMIA. Detection rate of serum HBV DNA by real-time RT-PCR is 29.3% (79/270). The measured amount of serum HBV DNA concentration is $4.8{\times}10^7{\pm}1.9{\times}10^8IU/mL$($mean{\pm}SD$). The minimum value is 16IU/mL, the maximum value is $1.0{\times}10^9IU/mL$, and the reference value for quantitative detection limit is 15IU/mL. The detection rates and concentrations of HBV DNA by group according to the results of HBeAg serological (IRMA, CMIA)tests were as follows. 1) Group I (IRMA negative, CMIA positive, N = 169), HBV DNA detection rate of 17.7% (30/169), $6.8{\times}10^5{\pm}1.9{\times}10^6IU/mL$ 2) Group II (IRMA positive, CMIA positive, N = 53), HBV DNA detection rate 62.3% (33/53), $1.1{\times}10^8{\pm}2.8{\times}10^8IU/mL$ 3) Group III (IRMA negative, CMIA negative, N = 36), HBV DNA detection rate 36.1% (13/36), $3.0{\times}10^5{\pm}1.1{\times}10^6IU/mL$ 4) Group IV(IRMA positive, CMIA negative, N = 12), HBV DNA detection rate 25% (3/12), $1.3{\times}10^3{\pm}1.1{\times}10^3IU/mL$ Conclusion HBeAg detection rate according to the serological test showed a large difference. This difference is considered for a number of reasons such as characteristics of the Ab used for assay kit and epitope, HBV of genotype. Detection rate and the concentration of the group-specific HBV DNA classified serologic results confirmed the high detection rate and the concentration in Group II (IRMA-positive, CMIA positive, N = 53).